| 1. |
|
|
| 2. |
- Moiseyenko, Volodymyr, et al.
(författare)
-
First experiments on ICRF discharge generation by a W7-X-like antenna in the Uragan-2M stellarator
- 2020
-
Ingår i: Journal of Plasma Physics. - : Cambridge University Press (CUP). - 0022-3778 .- 1469-7807. ; 86:5
-
Tidskriftsartikel (refereegranskat)abstract
- In support of the ICRF experiments planned on the Wendelstein 7-X (W7-X) stellarator, i.e. fast ion generation, wall conditioning, target plasma production and heating, a first experimental study on plasma production has been made in the Uragan-2M (U-2M) stellarator using W7-X-like two-strap antenna. In all the experiments, antenna monopole phasing was used. The W7-X-like antenna operation with launched radiofrequency power of ~100 kW have been performed in helium (p = (4–14) × 10−2 Pa) with the vacuum vessel walls pre-loaded with hydrogen. Production of plasma with a density higher than 1012 cm−3 was observed near the first harmonic of the hydrogen cyclotron frequency. Operation at first hydrogen harmonic is feasible in W7-X future ICRF experiments.
|
|
| 3. |
|
|
| 4. |
- Biel, W., et al.
(författare)
-
Diagnostics for plasma control - : From ITER to DEMO
- 2019
-
Ingår i: Fusion engineering and design. - : ELSEVIER SCIENCE SA. - 0920-3796 .- 1873-7196. ; 146:A, s. 465-472
-
Tidskriftsartikel (refereegranskat)abstract
- The plasma diagnostic and control (D&C) system for a future tokamak demonstration fusion reactor (DEMO) will have to provide reliable operation near technical and physics limits, while its front-end components will be subject to strong adverse effects within the nuclear and high temperature plasma environment. The ongoing developments for the ITER D&C system represent an important starting point for progressing towards DEMO. Requirements for detailed exploration of physics are however pushing the ITER diagnostic design towards using sophisticated methods and aiming for large spatial coverage and high signal intensities, so that many front-end components have to be mounted in forward positions. In many cases this results in a rapid aging of diagnostic components, so that additional measures like protection shutters, plasma based mirror cleaning or modular approaches for frequent maintenance and exchange are being developed. Under the even stronger fluences of plasma particles, neutron/gamma and radiation loads on DEMO, durable and reliable signals for plasma control can only be obtained by selecting diagnostic methods with regard to their robustness, and retracting vulnerable front-end components into protected locations. Based on this approach, an initial DEMO D&C concept is presented, which covers all major control issues by signals to be derived from at least two different diagnostic methods (risk mitigation).
|
|
| 5. |
- Kovtun, Yu.V., et al.
(författare)
-
ICRF plasma production in gas mixtures in the Uragan-2M stellarator
- 2023
-
Ingår i: Fusion engineering and design. - : Elsevier BV. - 0920-3796 .- 1873-7196. ; 194
-
Tidskriftsartikel (refereegranskat)abstract
- This paper summarizes previous results and presents new studies on the ICRF plasma creation both in pure gases and gas mixtures. In all the experiments, the two-strap antenna was operated in monopole phasing with applied RF power of ∼100 kW. The research for plasma creation was carried out at RF frequencies near the fundamental hydrogen cyclotron harmonic.
|
|
| 6. |
- Moiseyenko, Volodymyr, et al.
(författare)
-
Plasma Production in ICRF in the Uragan-2M Stellarator in Hydrogen–Helium Gas Mixture
- 2022
-
Ingår i: Journal of fusion energy. - : Springer. - 0164-0313 .- 1572-9591. ; 41:2
-
Tidskriftsartikel (refereegranskat)abstract
- Plasma production experiments in helium at Uragan-2M have been performed to investigate the role of the hydrogen minority in helium. The experiments presented here were carried on with a controlled minority hydrogen concentration. The hydrogen minority allowed one to increase plasma density more than three times as compared with pure helium. The obtained plasma density is highest for whole time of Uragan-2M operation. The developed scenario allowed to decrease the neutral gas pressure at which the plasma production is possible. This is a requirement for achieving regimes of plasma production with full ionization. Although the initial gas mixture 14%H2 + 86%He can be treated as optimum, there is no sensitive dependence on hydrogen minority concentration, which makes the scenario robust. This study, together with initial LHD experiments, confirm the prospects of target plasma production by ICRF waves for stellarator type machines.
|
|
| 7. |
- Falchetto, G. L., et al.
(författare)
-
The European Integrated Tokamak Modelling (ITM) effort: achievements and first physics results
- 2014
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 54:4
-
Tidskriftsartikel (refereegranskat)abstract
- A selection of achievements and first physics results are presented of the European Integrated Tokamak Modelling Task Force (EFDA ITM-TF) simulation framework, which aims to provide a standardized platform and an integrated modelling suite of validated numerical codes for the simulation and prediction of a complete plasma discharge of an arbitrary tokamak. The framework developed by the ITM-TF, based on a generic data structure including both simulated and experimental data, allows for the development of sophisticated integrated simulations (workflows) for physics application.The equilibrium reconstruction and linear magnetohydrodynamic (MHD) stability simulation chain was applied, in particular, to the analysis of the edgeMHDstability of ASDEX Upgrade type-I ELMy H-mode discharges and ITER hybrid scenario, demonstrating the stabilizing effect of an increased Shafranov shift on edge modes. Interpretive simulations of a JET hybrid discharge were performed with two electromagnetic turbulence codes within ITM infrastructure showing the signature of trapped-electron assisted ITG turbulence. A successful benchmark among five EC beam/ray-tracing codes was performed in the ITM framework for an ITER inductive scenario for different launching conditions from the equatorial and upper launcher, showing good agreement of the computed absorbed power and driven current. Selected achievements and scientific workflow applications targeting key modelling topics and physics problems are also presented, showing the current status of the ITM-TF modelling suite.
|
|
| 8. |
|
|
| 9. |
- Coelho, R., et al.
(författare)
-
Synthetic Diagnostics In The European Union Integrated Tokamak Modelling Simulation Platform
- 2013
-
Ingår i: Fusion science and technology. - 1536-1055 .- 1943-7641. ; 63:1, s. 1-8
-
Tidskriftsartikel (refereegranskat)abstract
- The European Union Integrated Tokamak Modelling Task Force (ITM-TF) has developed a standardized platform and an integrated modeling suite of codes for the simulation and prediction of a complete plasma discharge in any tokamak. The framework developed by ITM-TF allows for the development of sophisticated integrated simulations (workflows) for physics application, e.g., free-boundary equilibrium with feedback control, magnetohydrodynamic stability analysis, core/edge plasma transport, and heating and current drive. A significant effort is also under way to integrate synthetic diagnostic modules in the ITM-TF environment, namely, focusing on three-dimensional reflectometry, motional Stark effect, and neutron and neutral particle analyzer diagnostics. This paper gives an overview of the conceptual design of ITM-TF and preliminary results of the aforementioned synthetic diagnostic modules.
|
|
| 10. |
- Goriaev, A., et al.
(författare)
-
The upgraded TOMAS device : A toroidal plasma facility for wall conditioning, plasma production, and plasma-surface interaction studies
- 2021
-
Ingår i: Review of Scientific Instruments. - : AMER INST PHYSICS. - 0034-6748 .- 1089-7623. ; 92:2
-
Tidskriftsartikel (refereegranskat)abstract
- The Toroidal Magnetized System device has been significantly upgraded to enable development of various wall conditioning techniques, including methods based on ion and electron cyclotron (IC/EC) range of frequency plasmas, and to complement plasma-wall interaction research in tokamaks and stellarators. The toroidal magnetic field generated by 16 coils can reach its maximum of 125 mT on the toroidal axis. The EC system is operated at 2.45 GHz with up to 6 kW forward power. The IC system can couple up to 6 kW in the frequency range of 10 MHz-50 MHz. The direct current glow discharge system is based on a graphite anode with a maximum voltage of 1.5 kV and a current of 6 A. A load-lock system with a vertical manipulator allows exposure of material samples. A number of diagnostics have been installed: single- and triple-pin Langmuir probes for radial plasma profiles, a time-of-flight neutral particle analyzer capable of detecting neutrals in the energy range of 10 eV-1000 eV, and a quadrupole mass spectrometer and video systems for plasma imaging. The majority of systems and diagnostics are controlled by the Siemens SIMATIC S7 system, which also provides safety interlocks.
|
|
