| 1. |
- Dong, Bin, 1984, et al.
(författare)
-
Design of an Asymmetrical Quadruple-ridge Flared Horn Feed: a Solution to Eliminate Polarization Discrepancy in the Offset Reflecting Systems
- 2018
-
Ingår i: IET Conference Publications. ; 2018:CP741
-
Konferensbidrag (refereegranskat)abstract
- Quadruple-ridge Flared Horns (QRFHs) have been showing qualified performance as the feed antennas for the reflecting systems in the Square Kilometre Array (SKA). However, due to the offset optics of the SKA reflecting system, identical illuminations from dual polarizations of the feed would but result in different system performance. This difference would become more severe towards high frequencies and may cause the worse polarization unqualified for the desired specification. In this paper, an asymmetrical QRFH feed working over Band B (4.6–24 GHz) is proposed and optimized to tackle this problem.The asymmetrical Band-B feed is composed of two different and orthogonal pairs of both ridges and sidewall quad-pieces, so as to provide orthogonal polarizations but different illuminations. Simulated results show that, by this asymmetrical design different beamwidths and different combinations of sub-efficiencies can be provided for two polarizations, so as to eliminate the polarization discrepancy over most of the bandwidth. Benefitting from this elimination, both polarizations of the Band-B feed have now achieved the SKA specification in terms of aperture efficiency.
|
|
| 2. |
- Dong, Bin, 1984, et al.
(författare)
-
Optimization and Realization of Quadruple-ridge Flared Horn with New Spline-defined Profiles as a High-efficiency Feed over 4.6–24 GHz
- 2019
-
Ingår i: IEEE Transactions on Antennas and Propagation. - 0018-926X .- 1558-2221. ; 67:1, s. 585-590
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we present a new optimization and realization of a quadruple-ridge flared horn (QRFH) as a feed for reflector antennas of the Square Kilometre Array (SKA) project. The QRFH has been numerically optimized by spline-defined profiles for both the ridges and the horn sidewall, with a conical cavity in the back-short for maximum aperture efficiency. The final aperture efficiency better than (for horizontal polarization) or around (for vertical polarization) 78% over 4.6–8 GHz, 70% over 8–15 GHz, 65% over 15–20 GHz and 60% over 20–24 GHz in the SKA offset-Gregorian dual-reflector antenna has been achieved. The realization of the horn has been carried out carefully by applying several new mechanical design solutions in order to guarantee the accurate positioning of the ridges, the feeding pins and a good electrical contact. The measured S11 is mostly better than -10 dB and the predicted aperture efficiency based on the measured far field patterns agrees well with the simulated result. System performance, such as the sensitivity and system noise temperature, are also estimated and presented.
|
|
