| 1. |
- Bao, Qinye, et al.
(författare)
-
Energy Level Alignment of N-Doping Fullerenes and Fullerene Derivatives Using Air-Stable Dopant
- 2017
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 9:40, s. 35476-35482
-
Tidskriftsartikel (refereegranskat)abstract
- Doping has been proved to be one of the powerful technologies to achieve significant improvement in the performance of organic electronic devices. Herein, we systematically map out the interface properties of solution-processed air-stable n-type (4(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl) doping fullerenes and fullerene derivatives and establish a universal energy level alignment scheme for this class of n-doped system. At low doping levels at which the charge-transfer doping induces mainly bound charges, the energy level alignment of the n-doping organic semiconductor can be described by combining integer charger transfer-induced shifts with a so-called double-dipole step. At high doping levels, significant densities of free charges are generated and the charge flows between the organic film and the conducting electrodes equilibrating the Fermi level in a classic "depletion layer" scheme. Moreover, we demonstrate that the model holds for both n- and p-doping of pi-backbone molecules and polymers. With the results, we provide wide guidance for identifying the application of the current organic n-type doping technology in organic electronics.
|
|
| 2. |
- Bao, Qinye, et al.
(författare)
-
The Effect of Oxygen Uptake on Charge Injection Barriers in Conjugated Polymer Films
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 10:7, s. 6491-6497
-
Tidskriftsartikel (refereegranskat)abstract
- The energy offset between the electrode Fermi level and organic semiconductor transport levels is a key parameter controlling the charge injection barrier and hence efficiency of organic electronic devices. Here, we systematically explore the effect of in situ oxygen exposure on energetics in n-type conjugated polymer P(NDI2OD-T2) films. The analysis reveals that an interfacial potential step is introduced for a series of P(NDI2OD-T2) electrode contacts, causing a nearly constant downshift of the vacuum level, while the ionization energies versus vacuum level remain constant. These findings are attributed to the establishment of a so-called double-dipole step via motion of charged molecules and will modify the charge injection barriers at electrode contact. We further demonstrate that the same behavior occurs when oxygen interacts with p-type polymer TQ1 films, indicating it is possible to be a universal effect for organic semiconductOrs.
|
|
| 3. |
- Guo, Xuewen, et al.
(författare)
-
Novel small-molecule zwitterionic electrolyte with ultralow work function as cathode modifier for inverted polymer solar cells
- 2018
-
Ingår i: Organic electronics. - : ELSEVIER SCIENCE BV. - 1566-1199 .- 1878-5530. ; 59, s. 15-20
-
Tidskriftsartikel (refereegranskat)abstract
- Interfacial compatibility between the electrode and organic semiconductor plays a critical role in controlling the charge transport and hence efficiency of organic solar cell. Here, we introduce a novel small-molecule zwitterionic electrolyte (S1) combined with ZnO as electron transporting interlayer employed for the inverted PTB7:PC71BM bulk heterojunction solar cell. The resulting device with the S1/ZnO stacked interlayer achieves a high PCE of 8.59%, obtaining a 16.2% improvement over the control device performance of 7.4% without the S1 attributed to the significant increased short-circuit current density and fill factor. The interfacial properties are investigated. It is found that the S1/ZnO interlayer possess an ultralow work function of 3.6 eV, which originates from the interfacial double dipole step induced by the zwitterionic side chain electrostatic realignment at interface. The S1/ZnO interlayer exhibits the excellent charge extraction ability, suppresses the charge recombination loss and decreases the series resistance at the active layer/electrode contact.
|
|
| 4. |
- Guo, Xuewen, et al.
(författare)
-
Understanding the effect of N2200 on performance of J71 : ITIC bulk heterojunction in ternary non-fullerene solar cells
- 2019
-
Ingår i: Organic electronics. - : Elsevier. - 1566-1199 .- 1878-5530. ; 71, s. 65-71
-
Tidskriftsartikel (refereegranskat)abstract
- None-fullerene solar cells with ternary architecture have attracted much attention because it is an effective approach for boosting the device power conversion efficiency. Here, the crystalline polymer N2200 as the third component is integrated into J71: ITIC bulk heterojunction. A series of characterizations indicate that N2200 could increase photo-harvesting, balanced hole and electron mobilities, enhanced exciton dissociation, and suppressed charge recombination, which result in the comprehensive improvement of open circuit voltage, short circuit current and fill factor in the device. Moreover, after introduction of N2200, the morphology of the ternary active layer is optimized, and the film crystallinity is improved. This work demonstrates that adding a small quantity of high crystallization acceptor into non-fullerene donor: acceptor mixture is a promising strategy toward developing high-performance organic solar cells.
|
|
| 5. |
- Li, Danqin, et al.
(författare)
-
Enhanced and Balanced Charge Transport Boosting Ternary Solar Cells Over 17% Efficiency
- 2020
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 32:34
-
Tidskriftsartikel (refereegranskat)abstract
- Ternary architecture is one of the most effective strategies to boost the power conversion efficiency (PCE) of organic solar cells (OSCs). Here, an OSC with a ternary architecture featuring a highly crystalline molecular donor DRTB-T-C4 as a third component to the host binary system consisting of a polymer donor PM6 and a nonfullerene acceptor Y6 is reported. The third component is used to achieve enhanced and balanced charge transport, contributing to an improved fill factor (FF) of 0.813 and yielding an impressive PCE of 17.13%. The heterojunctions are designed using so-called pinning energies to promote exciton separation and reduce recombination loss. In addition, the preferential location of DRTB-T-C4 at the interface between PM6 and Y6 plays an important role in optimizing the morphology of the active layer.
|
|
| 6. |
- Xiao, Wei, et al.
(författare)
-
Exploring Red, Green, and Blue Light-Activated Degradation of Perovskite Films and Solar Cells for Near Space Applications
- 2020
-
Ingår i: Solar RRL. - : Wiley-VCH Verlagsgesellschaft. - 2367-198X. ; 4:3
-
Tidskriftsartikel (refereegranskat)abstract
- Hybrid perovskite solar cells with a high specific power have great potential to become promising power sources mounted on spacecrafts in space applications. However, there is a lack of study on their photostability as light absorbers in those conditions. Herein, the stability of the perovskite films and solar cells under red, green, and blue (RGB) light illumination in medium vacuum that belongs to near space is explored. The perovskite active layers exhibit different degradations from morphological, chemical, and structural points of view. This is attributed to the strong coupling between photoexcited carriers and the crystal lattice and the diversity of RGB light absorption in the perovskite films. Device characterizations reveal that the efficiency loss of perovskite solar cells results from not only perovskite degradation, but also the photoexcited carriers reducing the energy barrier of ion migration and accelerating the migration to generate more deep-level trap defects. Moreover, comparative devices suggest that the well encapsulation can weaken the effect of vacuum on stability.
|
|
| 7. |
- Xiong, Shaobing, et al.
(författare)
-
Defect-Passivation Using Organic Dyes for Enhanced Efficiency and Stability of Perovskite Solar Cells
- 2020
-
Ingår i: Solar RRL. - : WILEY-V C H VERLAG GMBH. - 2367-198X. ; 4:5
-
Tidskriftsartikel (refereegranskat)abstract
- Perovskite solar cells are a highly competitive candidate for next-generation photovoltaic technology. Defects in the perovskite grain boundaries and on the film surfaces however have significant impacts on both the device efficiency and environmental stability. Herein, a strategy using organic dyes as additives to passivate the defect states and produce more n-type perovskite films, thereby improving charge transport and decreasing charge recombination, is reported. Based on this strategy, the power conversion efficiency of the perovskite solar cell is significantly increased from 18.13% to 20.18% with a negligible hysteresis. Furthermore, the rich hydrogen bonds and carbonyl structures in the organic dye can significantly enhance device stability both in terms of humidity and thermal stress. The results present a promising pathway using abundant and colorful organic dyes as additives to achieve high-performance perovskite solar cells.
|
|
| 8. |
- Xiong, Shaobing, et al.
(författare)
-
Engineering of the Back Contact between PCBM and Metal Electrode for Planar Perovskite Solar Cells with Enhanced Efficiency and Stability
- 2019
-
Ingår i: Advanced Optical Materials. - : WILEY-V C H VERLAG GMBH. - 2162-7568 .- 2195-1071. ; 7:19
-
Tidskriftsartikel (refereegranskat)abstract
- The cathode interface plays a critical role in achieving high-performance fullerene/perovskite planar solar cells. Herein, the simple molecule Isatin and its derivatives are introduced at the back contact [6,6]-phenyl-C61-butyric acid methyl ester (PCBM)/Al as a cathode modification interlayer. It is revealed that the Isatin interlayers facilitate electron transport/extraction and suppress electron recombination, attributed to the formation of negative dipole potential steps and the passivation of the interfacial trap density. The average power conversion efficiencies of the resulting devices are significantly improved by 11% from 17.68% to 19.74%, with an enhancement in all device parameters including short-circuit current, open-circuit voltage, and fill factor. The hysteresis index is found to disappear. In addition, such interlayer enhances device stability under ambient conditions compared to the control devices due to suppression of moisture-induced degradation of the perovskite films. These findings provide a comprehensive understanding of the engineering of the back contact between PCBM and the metal electrode to improve efficiency and stability of perovskite solar cells.
|
|
| 9. |
- Yang, Jianming, et al.
(författare)
-
Comprehensive understanding of heat-induced degradation of triple-cation mixed halide perovskite for a robust solar cell
- 2018
-
Ingår i: Nano Energy. - : ELSEVIER SCIENCE BV. - 2211-2855 .- 2211-3282. ; 54, s. 218-226
-
Tidskriftsartikel (refereegranskat)abstract
- The triple-cation mixed halide perovskite Cs-0.05(MA(0.17)FA(0.83))(0.95)Pb(I0.83Br0.17)(3) emerges as one of the most promising candidates for photovoltaics due to superior optoelectronic properties, but the thermal stability is still a major challenge for the viability of perovskite solar cells towards commercialization. Herein, we firstly explore the thermal response of the photovoltaic performances to access device physical changes. It is shown that the efficiency loss originates from decreased charge mobility, increased trap density and generation of PbI2 charge recombination centers near the interface. In-depth analysis of evolutions in morphology, chemical composition, dynamic and electronic structure of the perovskite layer at the nanometer scales indicates that it is initial dangling bonds and vacancies on the imperfect surfaces decrease the activation energy and cause the perovskite decomposition in a layer-by-layer pathway sequentially from the film surface to bulk. Based on the results, a strategy of surface passivation to improve the thermal stability is demonstrated and discussed. This work for the first time provides insights into the physical and chemical change of such triple-cation perovskite and indicates that more effort should be invested in surface treatment for enhancing perovskite device stability.
|
|
| 10. |
- Yang, Jianming, et al.
(författare)
-
Energetics and Energy Loss in 2D Ruddlesden-Popper Perovskite Solar Cells
- 2020
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 10:23
-
Tidskriftsartikel (refereegranskat)abstract
- 2D Ruddlesden-Popper perovskites (RPPs) are emerging as potential challengers to their 3D counterpart due to superior stability and competitive efficiency. However, the fundamental questions on energetics of the 2D RPPs are not well understood. Here, the energetics at (PEA)(2)(MA)(n)-1PbnI3n+1/[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) interfaces with varying n values of 1, 3, 5, 40, and infinity are systematically investigated. It is found that n-n junctions form at the 2D RPP interfaces (n = 3, 5, and 40), instead of p-n junctions in the pure 2D and 3D scenarios (n = 1 and infinity). The potential gradient across phenethylammonium iodide ligands that significantly decreases surface work function, promotes separation of the photogenerated charge carriers with electron transferring from perovskite crystal to ligand at the interface, reducing charge recombination, which contributes to the smallest energy loss and the highest open-circuit voltage (V-oc) in the perovskite solar cells (PSCs) based on the 2D RPP (n = 5)/PCBM. The mechanism is further verified by inserting a thin 2D RPP capping layer between pure 3D perovskite and PCBM in PSCs, causing the V-oc to evidently increase by 94 mV. Capacitance-voltage measurements with Mott-Schottky analysis demonstrate that such V-oc improvement is attributed to the enhanced potential at the interface.
|
|
