| 1. |
- Ebadat, Afrooz, 1986-
(författare)
-
Experiment Design for Closed-loop System Identification with Applications in Model Predictive Control and Occupancy Estimation
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The objective of this thesis is to develop algorithms for application-oriented input design. This procedure takes the model application into account when designing experiments for system identification.This thesis is divided into two parts. The first part considers the theory of application-oriented input design, with special attention to Model Predictive Control (MPC). We start by studying how to find a convex approximation of the set of models that result in acceptable control performance using analytical methods when controllers with no closed-form control law, for e.g., MPC are employed. The application-oriented input design is formulated in time domain to enable handling of signals constraints. The framework is extended to closed-loop systems where two cases are considered i.e., when the plant is controlled by a general but known controller and for the case of MPC. To this end, an external stationary signal is designed via graph theory. Different sources of uncertainty in application-oriented input design are investigated and a robust application-oriented input design framework is proposed.The second part of this thesis is devoted to the problem of estimating the number of occupants based on the information available to HVAC systems in buildings. The occupancy estimation is first formulated as a two-tier problem. In the first tier, the room dynamic is identified using temporary measurements of occupancy. In the second tier, the identified model is employed to formulate the problem as a fused-lasso problem. The proposed method is further developed to be used as a multi-room estimator using a physics-based model. However, since it is not always possible to collect measurements of occupancy, we proceed by proposing a blind identification algorithm which estimates the room dynamic and occupancy, simultaneously. Finally, the application-oriented input design framework is employed to collect data that is informative enough for occupancy estimation purposes.
|
|
| 2. |
- Ebadat, Afrooz, 1986-
(författare)
-
On Application Oriented Experiment Design for Closed-loop System Identification
- 2015
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- System identification concerns how to construct mathematical models of dynamic systems based on experimental data. A very important application of system identification is in model-based control design. In such applications it is often possible to externally excite the system during the data collection experiment. The properties of the exciting input signal influence the quality of the identified model, and well-designed input signals can reduce both the experimental time and effort. The objective of this thesis is to develop algorithms and theory for minimum cost experiment design for system identification while guaranteeing that the estimated model results in an acceptable control performance. We will use the framework of application oriented Optimal Input Design (OID). First, we study how to find a convex approximation of the set of models that results in acceptable control performance. The main contribution is analytical methods to determine application sets for controllers with no explicit control law, for instance Model Predictive Control (MPC). The application oriented OID problem is then formulated in time domain to enable the handling of signals constraints, which often comes from the physical limitations on the plant and actuators. The framework is the extended to closed-loopsystems. Here two different cases are considered. The first case assumes that the plant is controlled by a general (either linear or non-linear) but known controller. The main contribution here is a method to design an external stationary signal via graph theory such that the identification requirements and signal constraints are satisfied. In the second case application oriented OID problem is studied for MPC. The proposed approach here is a modification of a results where the experiment design requirements are integrated to the MPC as a constraint. The main idea is to back off from the identification requirements when the control requirements are violating from their acceptable bounds. We evaluate the effectiveness of all the proposed algorithms by several simulation examples.
|
|
