| 1. |
- Abdelhamid, Hani Nasser, et al.
(författare)
-
CelloZIFPaper : Cellulose-ZIF hybrid paper for heavy metal removal and electrochemical sensing
- 2022
-
Ingår i: Chemical Engineering Journal. - : Elsevier BV. - 1385-8947 .- 1873-3212. ; 446
-
Tidskriftsartikel (refereegranskat)abstract
- The processing of hierarchical porous zeolitic imidazolate frameworks (ZIF-8) into a cellulose paper using sheet former Rapid-Kothen (R.K.) is reported. The procedure is a promising route to overcome a significant bottleneck towards applying metal-organic frameworks (MOFs) in commercial products. ZIF-8 crystals were integrated into cellulose pulp (CP) or TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-oxidized cellulose nanofibrils (TOCNF) following an in-situ or ex-situ process; the materials were denoted as CelloZIFPaper_In Situ and CelloZIFPaper_Ex Situ, respectively. The materials were applied as adsorbents to remove heavy metals from water, with adsorption capacities of 66.2-354.0 mg/g. CelloZIFPaper can also be used as a stand-alone working electrode for the selective sensing of toxic heavy metals, for instance, lead ions (Pb2+), using electrochemical-based methods with a limit of detection (LOD) of 8 mu M. The electrochemical measurements may advance 'Lab-onCelloZIFPaper' technologies for label-free detection of heavy metal ions.
|
|
| 2. |
- Afewerki, Samson, et al.
(författare)
-
Combined Catalysis : A Powerful Strategy for Engineering Multifunctional Sustainable Lignin-Based Materials
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 17:8, s. 7093-7108
-
Tidskriftsartikel (refereegranskat)abstract
- The production and engineering of sustainable materials through green chemistry will have a major role in our mission of transitioning to a more sustainable society. Here, combined catalysis, which is the integration of two or more catalytic cycles or activation modes, provides innovative chemical reactions and material properties efficiently, whereas the single catalytic cycle or activation mode alone fails in promoting a successful reaction. Polyphenolic lignin with its distinctive structural functions acts as an important template to create materials with versatile properties, such as being tough, antimicrobial, self-healing, adhesive, and environmentally adaptable. Sustainable lignin-based materials are generated by merging the catalytic cycle of the quinone-catechol redox reaction with free radical polymerization or oxidative decarboxylation reaction, which explores a wide range of metallic nanoparticles and metal ions as the catalysts. In this review, we present the recent work on engineering lignin-based multifunctional materials devised through combined catalysis. Despite the fruitful employment of this concept to material design and the fact that engineering has provided multifaceted materials able to solve a broad spectrum of challenges, we envision further exploration and expansion of this important concept in material science beyond the catalytic processes mentioned above. This could be accomplished by taking inspiration from organic synthesis where this concept has been successfully developed and implemented.
|
|
| 3. |
- Afewerki, Samson, 1985-, et al.
(författare)
-
Engineering an All-Biobased Solvent- and Styrene-Free Curable Resin
- 2023
-
Ingår i: ACS Polymers Au. - : American Chemical Society (ACS). - 2694-2453. ; 3:6, s. 447-456
-
Tidskriftsartikel (refereegranskat)abstract
- The sustainable production of polymers and materials derived from renewable feedstocks such as biomass is vital to addressing the current climate and environmental challenges. In particular, finding a replacement for current widely used curable resins containing undesired components with both health and environmental issues, such as bisphenol-A and styrene, is of great interest and vital for a sustainable society. In this work, we disclose the preparation and fabrication of an all-biobased curable resin. The devised resin consists of a polyester component based on fumaric acid, itaconic acid, 2,5-furandicarboxylic acid, 1,4-butanediol, and reactive diluents acting as both solvents and viscosity enhancers. Importantly, the complete process was performed solvent-free, thus promoting its industrial applications. The cured biobased resin demonstrates very good thermal properties (stable up to 415 °C), the ability to resist deformation based on the high Young’s modulus of ∼775 MPa, and chemical resistance based on the swelling index and gel content. We envision the disclosed biobased resin having tailorable properties suitable for industrial applications.
|
|
| 4. |
- Albers, Eva, 1966, et al.
(författare)
-
Influence of preservation methods on biochemical composition and downstream processing of cultivated Saccharina latissima biomass
- 2021
-
Ingår i: Algal Research. - : Elsevier BV. - 2211-9264. ; 55
-
Tidskriftsartikel (refereegranskat)abstract
- Saccharina latissima biomass cultivated along the Swedish west coast was subjected to four different scalable preservation methods after harvest; freezing, sun-drying, oven-drying and ensiling. Freeze-drying and freezing at -80 ?C were also included to provide dry and wet references. The effects of the different preservation methods on the composition of Saccharina biomass (on dry weight, DW, basis), and the recovery as well as properties of high-quality protein, alginate and biogas were evaluated. Sun-drying significantly reduced protein, alginate and fatty acid content of the seaweeds and thereby concentrated ash in the biomass compared to the other methods. Protein/amino acids and fatty acids were significantly concentrated in ensiled biomass, while mannitol and laminarin were reduced compared to the other biomasses. Oven-drying and -20 ?C freezing affected the composition the least, with lower ash content and alterations in some specific amino and fatty acids. Sun-drying and ensiling resulted in significantly lower protein solubility at high pH compared to the other biomasses which translated into the lowest total seaweed protein recovery using the pH-shift process. Highest protein yield was obtained with the freeze-dried reference. Ensiling lead to a significant decrease in the molecular weight of alginate, while sun-drying caused a negative effect on alginate by inducing a shift in the guluronic and mannuronic acids composition of alginate. Sun-drying gave the lowest methane yield in the anaerobic digestion experiments while freezing at -80 ?C gave the highest yield, closely followed by freezing at -20 ?C and ensiling. To conclude, preservation methods must be carefully chosen to protect the valuable component in Saccharina latissima, and to achieve an efficient downstream processing ultimately yielding high quality products as part of a seaweed biorefinery.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Albertsson, Ann-Christine, 1945-, et al.
(författare)
-
Increased biocompatibility by surface modification
- 2004
-
Ingår i: Abstracts of Papers of the American Chemical Society. - : American Chemical Society (ACS). - 0065-7727. ; 228, s. U508-U508
-
Tidskriftsartikel (populärvet., debatt m.m.)
|
|
| 8. |
- Albertsson, Ann-Christine, 1945-, et al.
(författare)
-
New matrices for controlled drug delivery.
- 2000
-
Ingår i: ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY. - : American Chemical Society (ACS).
-
Konferensbidrag (refereegranskat)
|
|
| 9. |
|
|
| 10. |
|
|
