| 1. |
- Abermann, S., et al.
(författare)
-
Comparative study on the impact of TiN and Mo metal gates on MOCVD-grown HfO2 and ZrO2 high-kappa dielectrics for CMOS technology
- 2007
-
Ingår i: Physics of Semiconductors, Pts A and B. - : AIP. - 9780735403970 ; , s. 293-294
-
Konferensbidrag (refereegranskat)abstract
- We compare metal oxide semiconductor capacitors, investigating Titanium-Nitride and Molybdenum as gate materials, as well as metal organic chemical vapor deposited ZrO2 and HfO2 as high-kappa dielectrics, respectively. The impact of different annealing steps on the electrical characteristics of the various gate stacks is a further issue. The positive effect of post metallization annealing in forming gas atmosphere as well as observed mid-gap pinning of TiN and Mo metal gates is presented.
|
|
| 2. |
- Abermann, S., et al.
(författare)
-
Processing and evaluation of metal gate/high-kappa/Si capacitors incorporating Al, Ni, TiN, and Mo as metal gate, and ZrO2 and HfO2 as high-kappa dielectric
- 2007
-
Ingår i: Microelectronic Engineering. - : Elsevier BV. - 0167-9317 .- 1873-5568. ; 84:5-8, s. 1635-1638
-
Tidskriftsartikel (refereegranskat)abstract
- We evaluate various metal gate/high-K/Si capacitors by their resulting electrical characteristics. Therefore, we process MOS gate stacks incorporating aluminium (Al), nickel (Ni), titanium-nitride (TiN), and molybdenum (Mo) as the gate material, and metal organic chemical vapour deposited (MOCVD) ZrO2 and HfO2 as the gate dielectric, respectively. The influence of the processing sequence - especially of the thermal annealing treatment - on the electrical characteristics of the various gate stacks is being investigated. Whereas post metallization annealing in forming gas atmosphere improves capacitance-voltage behaviour (due to reduced interface-, and oxide charge density), current-voltage characteristics degrade due to a higher leakage current after thermal treatment at higher temperatures. The Flatband-voltage values for the TiN-, Mo-, and Ni-capacitors indicate mid-gap pinning of the metal gates, however, Ni seems to be thermally unstable on ZrO2, at least within the process scheme we applied.
|
|
| 3. |
- Gottlob, H. D. B., et al.
(författare)
-
0.86-nm CET gate stacks with epitaxial Gd2O3 high-k dielectrics and FUSINiSi metal electrodes
- 2006
-
Ingår i: IEEE Electron Device Letters. - 0741-3106 .- 1558-0563. ; 27:10, s. 814-816
-
Tidskriftsartikel (refereegranskat)abstract
- In this letter, ultrathin gadolinium oxide (Gd2O3) high-kappa gate dielectrics with complementary-metal-oxide-semiconductor (CMOS)-compatible fully silicided nickel-silicide metal gate electrodes are reported for the first time. MOS capacitors with a Gd2O3 thickness of 3.1 nm yield a capacitance equivalent oxide thickness of CET = 0.86 nm. The extracted dielectric constant is kappa =-13-14. Leakage currents and equivalent oxide thicknesses of this novel gate stack meet the International Technology Roadmap for Semiconductors targets for the near term schedule and beyond.
|
|
| 4. |
- Gottlob, H. D. B., et al.
(författare)
-
CMOS integration of epitaxial Gd(2)O(3) high-k gate dielectrics
- 2006
-
Ingår i: Solid-State Electronics. - : Elsevier BV. - 0038-1101 .- 1879-2405. ; 50:6, s. 979-985
-
Tidskriftsartikel (refereegranskat)abstract
- Epitaxial gadolinium oxide (Gd(2)O(3)) high-k dielectrics are investigated with respect to their CMOS compatibility in metal oxide semiconductor (MOS) capacitors and field effect transistors (MOSFETs). MOS capacitors with various gate electrodes are exposed to typical CMOS process steps and evaluated with capacitance voltage (CV) and current voltage (JV) measurements. The effects of high temperature processes on thermal stabilities of channel/dielectric and dielectric/gate electrode interfaces is studied in detail. A feasible CMOS process with epitaxial gate oxides and metal gate electrodes is identified and demonstrated by a fully functional n-MOSFET for the first time.
|
|
| 5. |
- Wahlbrink, T., et al.
(författare)
-
Highly selective etch process for silicon-on-insulator nano-devices
- 2005
-
Ingår i: Microelectronic Engineering. - : Elsevier BV. - 0167-9317 .- 1873-5568. ; 78-79:SI, s. 212-217
-
Tidskriftsartikel (refereegranskat)abstract
- Reactive ion etch (RIE) processes with HBr/O-2 chemistry are optimized for processing of functional nanostructures based on silicon and polysilicon. The etch rate, etch selectivity, anisotropy and sidewall roughness are investigated for specific applications. The potential of this process technology for nanoscale functional devices is demonstrated by MOSFETs with 12 nm gate length and optimized photonic devices with ultrahigh Q-factors.
|
|
| 6. |
- Abermann, S., et al.
(författare)
-
Impact of Al-, Ni-, TiN-, and Mo-metal gates on MOCVD-grown HfO2 and ZrO2 high-k dielectrics
- 2007
-
Ingår i: Microelectronics and reliability. - : Elsevier BV. - 0026-2714 .- 1872-941X. ; 47:4-5, s. 536-539
-
Tidskriftsartikel (refereegranskat)abstract
- In this work we compare the impacts of nickel (Ni), titanium-nitride (TiN), molybdenum (Mo), and aluminium (Al), gates on MOS capacitors incorporating HfO2- or ZrO2-dielectrics. The primary focus lies on interface trapping, oxide charging, and thermodynamical stability during different annealing steps of these gate stacks. Whereas Ni, Mo, and especially TIN are investigated as most promising candidates for future CMOS devices, Al acted as reference gate material to benchmark the parameters. Post-metallization annealing of both, TiN- and Mo-stacks, resulted in very promising electrical characteristics. However, gate stacks annealed at temperatures of 800 degrees C or 950 degrees C show thermodynamic instability and related undesirable high leakage currents.
|
|
| 7. |
|
|
| 8. |
- Abermann, S., et al.
(författare)
-
Processing and evaluation of metal gate/high-k/Si capacitors incorporating Al, Ni, TiN, and Mo as metal gate, and ZrO2 and HfO2 as high-k dielectric
- 2007
-
Ingår i: Microelectronic Engineering. - : Elsevier BV. - 0167-9317 .- 1873-5568. ; 84:5-8, s. 1635-1638
-
Tidskriftsartikel (refereegranskat)abstract
- We evaluate various metal gate/high-k/Si capacitors by their resulting electrical characteristics. Therefore, we process MOS gate stacks incorporating aluminium (Al), nickel (Ni), titanium-nitride (TiN), and molybdenum (Mo) as the gate material, and metal organic chemical vapour deposited (MOCVD) ZrO2 and HfO2 as the gate dielectric, respectively. The influence of the processing sequence - especially of the thermal annealing treatment - on the electrical characteristics of the various gate stacks is being investigated. Whereas post metallization annealing in forming gas atmosphere improves capacitance-voltage behaviour (due to reduced interface-, and oxide charge density), current-voltage characteristics degrade due to a higher leakage current after thermal treatment at higher temperatures. The Flatband-voltage values for the TiN-, Mo-, and Ni-capacitors indicate mid-gap pinning of the metal gates, however, Ni seems to be thermally unstable on ZrO2, at least within the process scheme we applied.
|
|
| 9. |
|
|
| 10. |
- Echtermeyer, T., et al.
(författare)
-
Investigation of MOS capacitors and SOI-MOSFETs with epitaxial gadolinium oxide (Gd2O3) and titanium nitride (TiN) electrodes
- 2007
-
Ingår i: Solid-State Electronics. - : Elsevier BV. - 0038-1101 .- 1879-2405. ; 51:4, s. 617-621
-
Tidskriftsartikel (refereegranskat)abstract
- Electrical properties of metal oxide semiconductor (MOS) capacitors with gate stacks of epitaxial gadolinium oxide (Gd2O3) and titanium nitride (TiN) are studied. The influence of CMOS compatible rapid thermal annealing on these gate stacks is examined. Finally, n- and p-type MOS-field effect transistors (MOSFETs) on silicon on insulator (SOI) material with epitaxial Gd2O3 and TiN gate electrodes are presented.
|
|
