1. |
- Poulikidou, Sofia, 1984, et al.
(författare)
-
Impacts on fuel producers and customers of conflicting rules for life cycle assessment
- 2022
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- The use of life cycle assessment (LCA) as a tool for estimating the environmental performance of a product or service in a holistic and systematic manner is increasing. Fuel producers may need to apply different methodological frameworks to be used in different contexts; internally for product development activities as well as externally for communication with customers or authorities. Different LCA frameworks may vary in scope, system boundaries (i.e. life cycle stages to be considered) or modelling requirements (such as data demands but also more detailed methodological features). They may also vary in terms of information they can provide in relation to the environmental performance of the product. Those variations could lead to conflicting outcomes and conclusions and may also increase complexity for the LCA practitioner leading to high competence and resource requirements. Within the research project: Impacts on fuel producers and customers of conflicting rules for LCA , the requirements of different LCA frameworks and their implications to fuel producers are investigated. Focus has been given on three specific frameworks that are identified as relevant or potentially relevant for fuel producers, namely: the recast of the EU Renewable Energy Directive (referred to here as RED II), the EU framework for Product Environmental Footprint (PEF), and the framework of Environmental Product Declaration (EPD). The aim of the project is to increase understanding on the different LCA frameworks available and identify whether the multitude of such frameworks gives conflicting recommendations for environmental improvements and fuel choices. The three LCA frameworks listed above were applied in case studies. To illustrate the potential differences that the different frameworks may lead to, a variation of production pathways and feedstocks were selected including first generation as well as advanced biofuels. Based on the results obtained it can be concluded that applying all three frameworks is not a straightforward task. The methods contain fundamental differences and are at different levels of development, maturity, and adoption. In certain situations, they can lead to diverging conclusions as a result of different quantitative outcomes for a specific production pathway, thus influencing decision making processes in different directions. Understanding those differences and underlying assumptions is important for understanding the variations in outcome. The result for a specific fuel could differ substantially depending on the framework applied and the assumptions and interpretations made when applying this framework. Certain methodological parameters were identified to have a greater impact on the results than others: • The three frameworks diverge in the methods applied for modelling waste management, which can be very important for the results when the biofuel is produced from waste. • The frameworks diverge in what approaches are allowed for modelling processes with multiple products. This can be very important for the results when the fuel is co-produced with other products. • The frameworks also diverge in how the electricity supply is modelled. This is not very important for the results in most of our case studies, because the production of these biofuels does not require a lot of electricity. The study confirms that applying a framework like EPD or PEF in addition to RED II would require significant supplementary efforts. Not only because of different rules which were often contradicting or difficult to interpret but also because of additional data and reporting requirements. The need for expertise and resources is increasing for fuel producers to be able to provide EPD and PEF compliant assessments. To enhance the development and harmonization of LCA approaches this project stresses the need for product specific rules (in the form of Product Environmental Category Rules (PEFCR) and Product Category Rules (PCR)) for renewable fuels. Future versions of all three studied frameworks should be clearer on how specific methodological choices are to be applied (e.g., when it comes to allocation and multifunctional processes) as well as when it comes to model electricity supply. RED for example shall be clearer on how to define the electricity region while EPD guidelines on how to define the electricity market. Although it is not realistic to aim for a single unified LCA framework, the biofuel PCR and PEFCR can be developed with RED in mind. Some aspects of the PEF methodology can perhaps also be integrated into RED III that is currently under development. This would enhance the broader adoption of the frameworks among fuel producers. Finally, the involvement and engagement of the industry, and fuel producers themselves is very important. Industry initiatives are essential for the development of biofuel PCR and PEFCR while the general development of the three frameworks can also be influenced. In this study, we also investigated the relationship between the LCA frameworks and schemes for chain of custody certification (CoCC), in particular schemes for mass balance certifications (MBC) to investigate to what extent these schemes complement or overlap with LCA. The purpose of MBC schemes and LCA are different, in the sense that the first aim at verifying the sources and sustainability of total amounts of raw materials used by tracking them throughout the value chain, while the second at quantifying specific environmental impact. The system boundaries are similar, since both cover the entire value chain, but may be applied differently depending on the detailed frameworks applied and choices made in applying the MBC schemes. By identifying and clearly illustrating the variations among the studied frameworks the study enhances application, development, and harmonization of LCA, in a broader perspective, informs LCA practitioners but also decision makers and provides insights on how the identified challenges can be addressed.
|
|
2. |
|
|
3. |
- Olsson, Marie, et al.
(författare)
-
Utveckling av näringsladdad broccolisoppa
- 2020
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Hälsosamma livsmedel är idag något som många konsumenter prioriterar när de väljer mat till måltider, och intresset är också stort för färdiga rätter. Detta projekt initierades för att öka intresset för konsumtion av broccoli, en produkt med bra hälsovärde beaktat innehåll av näringsämnen och andra nyttiga ämnen, och att möta konsumenters efterfrågan på hälsosamma färdiga rätter. Broccolisorten ’Beneforte’ valdes eftersom denna sort har en dokumenterad högre halt av glukorafanin*. Det pågår kliniska studier i Europa om hälsoeffekter av broccolisorter med hög halt av detta ämne och dessa skulle kunna leda till att ett hälsopåstående blir godkänt av EFSA, den europeiska livssäkerhetsmyndigheten. Produkter baserade på denna broccolisort skulle då kunna marknadsföras med hälsopåståendet.
|
|
4. |
- Croxatto Vega, G., et al.
(författare)
-
Insights from combining techno-economic and life cycle assessment – a case study of polyphenol extraction from red wine pomace
- 2021
-
Ingår i: Resources, Conservation and Recycling. - : Elsevier B.V.. - 0921-3449 .- 1879-0658. ; 167
-
Tidskriftsartikel (refereegranskat)abstract
- To determine the environmental and economic performance of emerging processes for the valorization of red wine pomace, a techno-economic assessment (TEA) and a Life Cycle Assessment (LCA) are combined at an early design stage. A case study of two polyphenol extraction methods at laboratory scale, solvent extraction (SE) and pressurized liquid extraction (PLE), were first analyzed via a carbon footprint (CFP). Subsequently, the laboratory scale design was improved and translated into industrial scale and a TEA was performed on the industrial scale designs. Finally, LCA was applied again with all impact indicators and the information gathered from both the TEA and LCA was combined into concise decision support, using Multiple Criteria Decision Analysis (MCDA). SE performs better than PLE, due to a lower solvent to DW ratio and a less expensive processing setup in both environmental and economic terms. The CFP of at laboratory scale aided in showing potential environmental hotspots and highlighted the need to reduce solvent use. The MCDA showed a shift in decision support depending on how strongly economic or environmental benefits are valued and eases the interpretation of the 19 different indicators derived from the TEA-LCA results. Both SE and PLE with a solvent to dry weight (DW) ratio of 5 and 10, respectively, perform competitively while SE with a solvent to DW ratio of 10 outperforms PLE with a solvent to DW ratio of 25. The case study illustrated how early design calculations (CFP), and combined LCA and TEA may be combined to improve process design.
|
|
5. |
- David, Gregiore, et al.
(författare)
-
Using life cycle assessment to quantify the environmental benefit of upcycling vine shoots as fillers in biocomposite packaging materials
- 2021
-
Ingår i: The International Journal of Life Cycle Assessment. - : Springer Science and Business Media Deutschland GmbH. - 0948-3349 .- 1614-7502. ; 26, s. 738-752
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: The objective of the present study was to better understand the potential environmental benefit of using vine shoots (ViShs), an agricultural residue, as filler in composite materials. For that purpose, a comparative life cycle assessment (LCA) of a rigid tray made of virgin poly(3-hydroxybutyrate-co-3-hydroxyvalerate) PHBV, polylactic acid (PLA) or polypropylene (PP), and increasing content of ViSh particles was performed. The contribution of each processing step in the life cycle on the different environmental impacts was identified and discussed. Furthermore, the balance between the environmental and the economic benefits of composite trays was discussed. Methods: This work presents a cradle-to-grave LCA of composite rigid trays. Once collected in vineyards, ViShs were dried and ground using dry fractionation processes, then mixed with a polymer matrix by melt extrusion to produce compounds that were finally injected to obtain rigid trays for food packaging. The density of each component was taken into account in order to compare trays with the same volume. The maximum filler content was set to 30 vol% according to recommendations from literature and industrial data. The ReCiPe 2016 Midpoint Hierarchist (H) methodology was used for the assessment using the cutoff system model. Results and discussion: This study showed that bioplastics are currently less eco-friendly than PP. This is in part due to the fact that LCA does not account for, in existing tools, effects of microplastic accumulation and that bioplastic technologies are still under development with low tonnage. This study also demonstrated the environmental interest of the development of biocomposites by the incorporation of ViSh particles. The minimal filler content of interest depended on the matrices and the impact categories. Concerning global warming, composite trays had less impact than virgin plastic trays from 5 vol% for PHBV or PLA and from 20 vol% for PP. Concerning PHBV, the only biodegradable polymer in natural conditions in this study, the price and the impact on global warming are reduced by 25% and 20% respectively when 30 vol% of ViSh are added. Conclusion: The benefit of using vine shoots in composite materials from an environmental and economical point of view was demonstrated. As a recommendation, the polymer production step, which constitutes the most important impact, should be optimized and the maximum filler content in composite materials should be increased. © 2020, The Author(s).
|
|
6. |
- Dimberg, Lina Y., et al.
(författare)
-
Stat1 activation attenuates IL-6 induced Stat3 activity but does not alter apoptosis sensitivity in multiple myeloma
- 2012
-
Ingår i: BMC Cancer. - : Springer Science and Business Media LLC. - 1471-2407. ; 12, s. 318-
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Multiple myeloma (MM) is at present an incurable malignancy, characterized by apoptosis-resistant tumor cells. Interferon (IFN) treatment sensitizes MM cells to Fas-induced apoptosis and is associated with an increased activation of Signal transducer and activator of transcription (Stat)1. The role of Stat1 in MM has not been elucidated, but Stat1 has in several studies been ascribed a pro-apoptotic role. Conversely, IL-6 induction of Stat3 is known to confer resistance to apoptosis in MM. Methods: To delineate the role of Stat1 in IFN mediated sensitization to apoptosis, sub-lines of the U-266-1970 MM cell line with a stable expression of the active mutant Stat1C were utilized. The influence of Stat1C constitutive transcriptional activation on endogenous Stat3 expression and activation, and the expression of apoptosis-related genes were analyzed. To determine whether Stat1 alone would be an important determinant in sensitizing MM cells to apoptosis, the U-266-1970-Stat1C cell line and control cells were exposed to high throughput compound screening (HTS). Results: To explore the role of Stat1 in IFN mediated apoptosis sensitization of MM, we established sublines of the MM cell line U-266-1970 constitutively expressing the active mutant Stat1C. We found that constitutive nuclear localization and transcriptional activity of Stat1 was associated with an attenuation of IL-6-induced Stat3 activation and up-regulation of mRNA for the pro-apoptotic Bcl-2 protein family genes Harakiri, the short form of Mcl-1 and Noxa. However, Stat1 activation alone was not sufficient to sensitize cells to Fas-induced apoptosis. In a screening of > 3000 compounds including bortezomib, dexamethasone, etoposide, suberoylanilide hydroxamic acid (SAHA), geldanamycin (17-AAG), doxorubicin and thalidomide, we found that the drug response and IC50 in cells constitutively expressing active Stat1 was mainly unaltered. Conclusion: We conclude that Stat1 alters IL-6 induced Stat3 activity and the expression of pro-apoptotic genes. However, this shift alone is not sufficient to alter apoptosis sensitivity in MM cells, suggesting that Stat1 independent pathways are operative in IFN mediated apoptosis sensitization.
|
|
7. |
|
|
8. |
|
|
9. |
- Ekman Nilsson, Anna, et al.
(författare)
-
A review of carbon footprint of Cu and Zn production from primary and secondary sources
- 2017
-
Ingår i: Minerals. - : MDPI AG. - 2075-163X. ; 7:9, s. 168-
-
Tidskriftsartikel (refereegranskat)abstract
- Copper (Cu) and zinc (Zn) with their unique propertiesare central for economic growth, quality of life and creation of new jobs. The base-metalproducing sector is, however, under growing public pressure in respect toenergy and water requirements and needs to meet several challenges, includingincreased demand and lower ore grades generally associated with larger resourceuse. The development of technologies for metal production from secondarysources is often motivated by increased sustainability and this paper aims to providefurther insights about one specific aspect of sustainability, namely climatechange. The paper presents a review of carbon footprints (CF) for Cu and Znproduced from primary and secondary raw materials, by analyzing data taken fromscientific literature and the Ecoinvent database. Comparisons are carried outbased on the source of data selected as reference case. In the case of Cu,reduced CF of secondary production is indicated, although there is large datavariation. As for Zn, production of this metal from secondary sources seems to bebeneficial but the number of data and cases to be compared is much smallercompared to Cu. The general variation of data suggests that standardization ofcomparison is needed when assessing the environmental benefits of production inline with the principles of waste valorization, zero waste approach andcircular economy.
|
|
10. |
- Ekman Nilsson, Anna, et al.
(författare)
-
Life cycle assessment of a seaweed-based biorefinery concept for production of food, materials, and energy
- 2022
-
Ingår i: Algal Research. - : Elsevier B.V.. - 2211-9264. ; 65
-
Tidskriftsartikel (refereegranskat)abstract
- Blue Economy is seen as an essential contributor to a sustainable development, and it is an important part of the EU Green Deal. Seaweed plays a key role in the Blue Economy as a source of food, feed, and feedstock for biorefineries. Today, the largest part of global seaweed production is based in Asia, but there is also a growing interest in seaweed production in Europe. However, more knowledge on the environmental impacts is needed to ensure sustainable growth of the sector. Seaweed can be used in biorefineries to produce a variety of products for food and non-food applications. The aim of this paper was to perform a life cycle assessment (LCA) of a seaweed value-chain, including seaweed cultivation and production into sodium alginate, biodegradable materials, biogas, and fertilizer in a biorefinery setting. The LCA included 19 environmental impact categories but focused on climate change. The seaweed Saccharina latissima was cultivated and processed in Ireland. Sodium alginate was then extracted by means of ultrasound-assisted extraction, a novel extraction technology. Cellulosic residues produced after the extraction were used for the production of films used as a packaging material. Residues that remain after the production of the films were sent to anaerobic digestion to achieve a no-waste concept. For seaweed cultivation, fuel use and drying of seaweed biomass were the main environmental hot spots; and for the alginate extraction process, the yield and purification after extraction were the main hot spots. Overall, the results of this paper showed that the seaweed-based biorefinery has the potential to be sustainable, but several improvements are necessary before it is competitive with land-based systems. © 2022 The Authors
|
|