| 1. |
- Bergmann, Michael Alexander, 1989, et al.
(författare)
-
Electrochemical etching of AlGaN for the realization of thin-film devices
- 2019
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 115:18, s. 182103-
-
Tidskriftsartikel (refereegranskat)abstract
- Heterogeneously integrated AlGaN epitaxial layers will be essential for future optical and electrical devices like thin-film flip-chip ultraviolet (UV) light-emitting diodes, UV vertical-cavity surface-emitting lasers, and high-electron mobility transistors on efficient heat sinks. Such AlGaN-membranes will also enable flexible and micromechanical devices. However, to develop a method to separate the AlGaN-device membranes from the substrate has proven to be challenging, in particular, for high-quality device materials, which require the use of a lattice-matched AlGaN sacrificial layer. We demonstrate an electrochemical etching method by which it is possible to achieve complete lateral etching of an AlGaN sacrificial layer with up to 50% Al-content. The influence of etching voltage and the Al-content of the sacrificial layer on the etching process is investigated. The etched N-polar surface shows the same macroscopic topography as that of the as-grown epitaxial structure, and the root-mean square roughness is 3.5 nm for 1 µm x 1 µm scan areas. Separated device layers have a well-defined thickness and smooth etched surfaces. Transferred multi-quantum-well structures were fabricated and investigated by time-resolved photoluminescence measurements. The quantum wells showed no sign of degradation caused by the thin-film process.
|
|
| 2. |
- Bergmann, Michael Alexander, 1989, et al.
(författare)
-
Increased Light Extraction of Thin-Film Flip-Chip UVB LEDs by Surface Texturing
- 2023
-
Ingår i: ACS Photonics. - : American Chemical Society (ACS). - 2330-4022. ; 10:2, s. 368-373
-
Tidskriftsartikel (refereegranskat)abstract
- Ultraviolet light-emitting diodes (LEDs) suffer from a low wall-plug efficiency, which is to a large extent limited by the poor light extraction efficiency (LEE). A thin-film flip-chip (TFFC) design with a roughened N-polar AlGaN surface can substantially improve this. We here demonstrate an enabling technology to realize TFFC LEDs emitting in the UVB range (280-320 nm), which includes standard LED processing in combination with electrochemical etching to remove the substrate. The integration of the electrochemical etching is achieved by epitaxial sacrificial and etch block layers in combination with encapsulation of the LED. The LEE was enhanced by around 25% when the N-polar AlGaN side of the TFFC LEDs was chemically roughened, reaching an external quantum efficiency of 2.25%. By further optimizing the surface structure, our ray-tracing simulations predict a higher LEE from the TFFC LEDs than flip-chip LEDs and a resulting higher wall-plug efficiency.
|
|
| 3. |
- Bergmann, Michael Alexander, 1989, et al.
(författare)
-
Thin-film flip-chip UVB LEDs realized by electrochemical etching
- 2020
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 116:12, s. 121101-
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate a thin-film flip-chip (TFFC) light-emitting diode (LED) emitting in the ultraviolet B (UVB) at 311 nm, where substrate removal has been achieved by electrochemical etching of a sacrificial Al0.37Ga0.63N layer. The electroluminescence spectrum of the TFFC LED corresponds well to the as-grown LED structure, showing no sign of degradation of structural and optical properties by electrochemical etching. This is achieved by a proper epitaxial design of the sacrificial layer and the etch stop layers in relation to the LED structure and the electrochemical etch conditions. Enabling a TFFC UV LED is an important step toward improving the light extraction efficiency that limits the power conversion efficiency in AlGaN-based LEDs.
|
|
| 4. |
- Bergmann, Michael Alexander, 1989, et al.
(författare)
-
Thin-film flip-chip UVB LEDs realized by electrochemical etching
- 2022
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- We will give an overview of different concepts to increase the light extraction efficiency (LEE) of ultraviolet (UV) light-emitting diodes (LEDs) with a focus on thin-film flip-chip (TFFC) devices. Optical simulations show that a TFFC design can greatly improve the LEE with a transparent p-side, reflective contacts, and optimized surface roughening. We will demonstrate UVB-emitting TFFC LEDs based on our fabrication platform for AlGaN thin films with high aluminum content. The fabrication is compatible with a standard LED process and uses substrate removal based on selective electrochemical etching as the key enabling technology.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Cardinali, G., et al.
(författare)
-
Low-Threshold AlGaN-based UVB VCSELs enabled by post-growth cavity detuning
- 2022
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 121:10
-
Tidskriftsartikel (refereegranskat)abstract
- The performance of vertical-cavity surface-emitting lasers (VCSELs) is strongly dependent on the spectral detuning between the gain peak and the resonance wavelength. Here, we use angle-resolved photoluminescence spectroscopy to investigate the emission properties of AlGaN-based VCSELs emitting in the ultraviolet-B spectral range with different detuning between the photoluminescence peak of the quantum-wells and the resonance wavelength. Accurate setting of the cavity length, and thereby the resonance wavelength, is accomplished by using doping-selective electrochemical etching of AlGaN sacrificial layers for substrate removal combined with deposition of dielectric spacer layers. By matching the resonance wavelength to the quantum-wells photoluminescence peak, a threshold power density of 0.4 MW/cm2 was achieved, and this was possible only for smooth etched surfaces with a root mean square roughness below 2 nm. These results demonstrate the importance of accurate cavity length control and surface smoothness to achieve low-Threshold AlGaN-based ultraviolet VCSELs.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Haglund, Åsa, 1976, et al.
(författare)
-
Are blue and ultraviolet VCSELs a reality or just a dream?
- 2020
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Blue-emitting vertical-cavity surface-emitting lasers (VCSELs) with high optical output powers and decent threshold current densities have recently been demonstrated, but the power efficiency is still below 10%. We will give an overview of the challenges to realize high-performing devices and summarize state-of-the-art results, including our schemes for optically guided devices that are used in the best blue VCSELs today. In addition, we will present our method to simultaneously achieve high-reflectivity mirrors and good control over the cavity length for ultraviolet VCSELs. This has resulted in, to the best of our knowledge, the shortest VCSEL emission wavelength around 310 nm.
|
|
