| 1. |
- Locke, Adam E, et al.
(författare)
-
Genetic studies of body mass index yield new insights for obesity biology.
- 2015
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 518:7538, s. 197-401
-
Tidskriftsartikel (refereegranskat)abstract
- Obesity is heritable and predisposes to many diseases. To understand the genetic basis of obesity better, here we conduct a genome-wide association study and Metabochip meta-analysis of body mass index (BMI), a measure commonly used to define obesity and assess adiposity, in up to 339,224 individuals. This analysis identifies 97 BMI-associated loci (P < 5 × 10(-8)), 56 of which are novel. Five loci demonstrate clear evidence of several independent association signals, and many loci have significant effects on other metabolic phenotypes. The 97 loci account for ∼2.7% of BMI variation, and genome-wide estimates suggest that common variation accounts for >20% of BMI variation. Pathway analyses provide strong support for a role of the central nervous system in obesity susceptibility and implicate new genes and pathways, including those related to synaptic function, glutamate signalling, insulin secretion/action, energy metabolism, lipid biology and adipogenesis.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Eriksson, Matias, et al.
(författare)
-
Characterization of ring deposits inside a quicklime producing long rotary kiln
- 2019
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 33:11, s. 11731-11740
-
Tidskriftsartikel (refereegranskat)abstract
- Ring deposits are common problems in rotary kiln operations. The ring is constantly subjected to thermal and mechanical wear counteracting the growth of the ring. If the ring hardens or if the growth of the ring is too rapid the kiln needs to be shut down and the ring removed, reducing the operational time and profitability of the process. In the present study, ring deposits from a limestone fed long rotary kiln producing quicklime was sampled and characterized in detail by SEM-EDS, dynamic rate TG and XRD. This work identifies three hardening mechanisms active in the kiln, an increased densification of the ring deposits near the refractory surface, the formation of calcite and spurrite through carbonation of the ring deposits, and the intrusion of molten fuel ash and product into the refractory, resulting in a strong attachment of the deposit to the refractory surface. The work also concludes that a significant part of the ring deposit has its origin in the fuel ash, contributing to deposit mass and increasing ring growth rate.
|
|
| 5. |
- Eriksson, Matias, et al.
(författare)
-
Impact of limestone surface impurities on quicklime product quality
- 2024
-
Ingår i: Minerals. - : MDPI. - 2075-163X. ; 14:3
-
Tidskriftsartikel (refereegranskat)abstract
- Quicklime is produced through the thermal processing of limestone in industrial kilns. During quarry operations, fine particulate quarry dust adheres to limestone lump surfaces, increasing the bulk concentration of impurities in limestone products. During thermal processing in a kiln, impurities such as Si, Mg, Al, Fe, and Mn react with Ca, reducing quicklime product quality. Which reactant phases are formed, and the extent to which these result in a reduction in quality, has not been extensively investigated. The present study investigated as-received and manually washed limestone product samples from two operational quarries using elemental compositions and a developed predictive multi-component chemical equilibrium model to obtain global phase diagrams for 1000–1500 °C, corresponding to the high-temperature zone of a lime kiln, identifying phases expected to be formed in quicklime during thermal processing. The results suggest that impurities found on the surface of the lime kiln limestone feed reduce the main quality parameter of the quicklime products, i.e., calcium oxide, CaO (s), content by 0.8–1.5 wt.% for the investigated materials. The results also show that, in addition to the effect of impurities, the quantity of CaO (s) varies greatly with temperature. More impurities result in more variation and a greater need for accurate temperature control of the kiln, where keeping the temperature below approximately 1300 °C, that of Hatrurite formation, is necessary for a product with higher CaO (s).
|
|
| 6. |
- Kilpeläinen, Tuomas O, et al.
(författare)
-
Genome-wide meta-analysis uncovers novel loci influencing circulating leptin levels
- 2016
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Leptin is an adipocyte-secreted hormone, the circulating levels of which correlate closely with overall adiposity. Although rare mutations in the leptin (LEP) gene are well known to cause leptin deficiency and severe obesity, no common loci regulating circulating leptin levels have been uncovered. Therefore, we performed a genome-wide association study (GWAS) of circulating leptin levels from 32,161 individuals and followed up loci reaching P<10(-6) in 19,979 additional individuals. We identify five loci robustly associated (P<5 × 10(-8)) with leptin levels in/near LEP, SLC32A1, GCKR, CCNL1 and FTO. Although the association of the FTO obesity locus with leptin levels is abolished by adjustment for BMI, associations of the four other loci are independent of adiposity. The GCKR locus was found associated with multiple metabolic traits in previous GWAS and the CCNL1 locus with birth weight. Knockdown experiments in mouse adipose tissue explants show convincing evidence for adipogenin, a regulator of adipocyte differentiation, as the novel causal gene in the SLC32A1 locus influencing leptin levels. Our findings provide novel insights into the regulation of leptin production by adipose tissue and open new avenues for examining the influence of variation in leptin levels on adiposity and metabolic health.
|
|
| 7. |
|
|
| 8. |
- Kumar Wagri, Naresh, 1988-
(författare)
-
Assessment of bio-based fuel ash effects on magnesia refractory materials in quicklime production kilns
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Limestone is calcined into quicklime in lime kilns at temperatures above 1000°C. Heat is supplied through combustion inside the kilns, which are insulated with a lining of refractory bricks to mitigate heat loss and to protect the kiln from the hot, chemically aggressive, and mechanically abrasive environment. While magnesia bricks have proven to be effective lining materials, they are still susceptible to extensive wear in lime kilns, especially in the burn zone. Refractory corrosion, in particular, can occur when melted fuel ash infiltrates the refractory materials through pores and small cracks. This resultant wear can lead to high maintenance and operational costs, often due to unplanned kiln shutdowns.To reduce the release of fossil-based carbon dioxide into the atmosphere from lime production kilns, there is a growing interest in introducing bio-based fuels with only relatively minor modifications to the process. Biomass fuels can be sourced from bio-based waste streams from industries or be specifically cultivated for combustion. However, the ash content and properties of bio-based fuels tend to be problematic from an ash chemistry perspective. Therefore, before introducing a new fuel source, it is essential to investigate its potential effects on the kiln lining material. In this thesis work, the interactions between melted olive pomace ash and coal ash with commercially available magnesia refractory materials, primarily composed of periclase (MgO) with minor amounts of spinel (MgAl2O4), were studied. A procedure for quantifying the intrusion depths was described. Refractory samples were exposed to the fuel ashes under a simulated lime kiln atmosphere with high CO2 levels at 1200 and 1400°C for 15 and 60 minutes. Cold crushing strength tests were conducted on refractory samples exposed to coal and olive pomace ash, along with CaO powder, at 1400°C for 96 hours. Additionally, postmortem analyses of spent MgO-based refractory bricks were carried out to investigate their chemical characterization and resistance to slag attack after serving as part of the lining in a quick lime rotary kiln for six months.The morphology and elemental compositions of the exposed samples were examined using scanning electron microscopy and energy-dispersive X-ray spectroscopy. Crystalline phases were investigated with powder X-ray diffraction. Thermodynamic equilibrium calculations were performed to further investigate the ash’s melting behavior in contact with the refractories.The results indicated that the potassium-rich olive pomace ash exhibited a greater tendency to infiltrate compared to the silicon-rich coal ash, while the latter formed a glassy melt layer on top of the refractory samples. The ash slags primarily infiltrated through the porous matrix and grain boundaries of the refractory materials. Also, refractory phases were observed in both types of ashes, indicating migration of refractory constituents. K2MgSiO4 phase was found in the olive pomace ash residues on top of the samples, both for the 1200°C and 1400°C exposures. Similarly, Al6Si2O13 phase was dominant in the residual coal ash, in both the 1200°C and 1400°C exposed samples. None of these phases were present in the original ashes.The results of the postmortem analysis revealed that there was no potassium (K) from the fuel ash present on the hot side of the refractory bricks. However, some K was detected in the middle and back parts of the bricks. On the other hand, some phases, possibly connected to degradation, could be found on the hot side of the bricks, where most of the wear was observed.The crushing strengths increased after exposure for all samples, except for those exposed exclusively to coal ash. One possible explanation for this is that the refractory materials exhibited a sintered structure, as a result of their interaction with the ashes and CaO. However, in the samples exposed to coal ash, forsterite (Mg2SiO4) was identified, which can be considered a corrosion product.
|
|
| 9. |
|
|
| 10. |
- Kumar Wagri, Naresh, et al.
(författare)
-
High temperature interactions between coal ash and MgO-based refractories in lime kiln conditions
- 2023
-
Ingår i: Fuel. - : Elsevier. - 0016-2361 .- 1873-7153. ; 342
-
Tidskriftsartikel (refereegranskat)abstract
- Magnesium oxide (MgO)-based refractories are commonly used in quicklime and cement rotary kilns. At the high temperatures in the kiln burn zone, the infiltration of molten fuel ash into the refractory can occur. Subsequent chemical interactions can cause refractory wear that inflicts high maintenance costs and loss of production. To improve refractory reliability, it is necessary to increase the understanding of the interactions between fuel ash slag and refractory liner materials. Three commercially available MgO-based refractory materials were exposed to coal ash at 1200 °C and 1400 °C for between 15 and 60 min under a CO2-rich gaseous environment. Hot slag from the coal ash infiltrated the refractories and the infiltration depths were estimated with scanning electron microscope with energy dispersive X-ray spectroscopy. Based on detailed elemental and microstructure analyses, the interactions between ash and refractory were examined. Molten silicates infiltrated the refractory through grain boundaries and pores into depths of up to 2.8 mm. Powder X-ray diffraction of the exposed refractory samples indicated that MgO grains reacted with SiO2-containing phases to form Mg2SiO4. This was identified as a corrosion product whose formation was supported by thermochemical equilibrium calculations. Elevated Mg content was found in the ash residue on top of the samples, indicating the dissolution or dislocation of refractory components. In addition, phases such as MgO were identified in the ash residue.
|
|
