| 1. |
- Arain, Muhammad Asif, 1983-, et al.
(författare)
-
Improving Gas Tomography With Mobile Robots : An Evaluation of Sensing Geometries in Complex Environments
- 2017
-
Ingår i: 2017 ISOCS/IEEE International Symposium on Olfaction andElectronic Nose (ISOEN 2017) Proceedings. - : IEEE. - 9781509023929 - 9781509023936
-
Konferensbidrag (refereegranskat)abstract
- An accurate model of gas emissions is of high importance in several real-world applications related to monitoring and surveillance. Gas tomography is a non-intrusive optical method to estimate the spatial distribution of gas concentrations using remote sensors. The choice of sensing geometry, which is the arrangement of sensing positions to perform gas tomography, directly affects the reconstruction quality of the obtained gas distribution maps. In this paper, we present an investigation of criteria that allow to determine suitable sensing geometries for gas tomography. We consider an actuated remote gas sensor installed on a mobile robot, and evaluated a large number of sensing configurations. Experiments in complex settings were conducted using a state-of-the-art CFD-based filament gas dispersal simulator. Our quantitative comparison yields preferred sensing geometries for sensor planning, which allows to better reconstruct gas distributions.
|
|
| 2. |
- Asadi, Sahar, 1983-, et al.
(författare)
-
Time-dependent gas distribution modelling
- 2017
-
Ingår i: Robotics and Autonomous Systems. - : Elsevier. - 0921-8890 .- 1872-793X. ; 96, s. 157-170
-
Tidskriftsartikel (refereegranskat)abstract
- Artificial olfaction can help to address pressing environmental problems due to unwanted gas emissions. Sensor networks and mobile robots equipped with gas sensors can be used for e.g. air pollution monitoring. Key in this context is the ability to derive truthful models of gas distribution from a set of sparse measurements. Most statistical gas distribution modelling methods assume that gas dispersion is a time constant random process. While this assumption approximately holds in some situations, it is necessary to model variations over time in order to enable applications of gas distribution modelling in a wider range of realistic scenarios. Time-invariant approaches cannot model well evolving gas plumes, for example, or major changes in gas dispersion due to a sudden change of the environmental conditions. This paper presents two approaches to gas distribution modelling, which introduce a time-dependency and a relation to a time-scale in generating the gas distribution model either by sub-sampling or by introducing a recency weight that relates measurement and prediction time. We evaluated these approaches in experiments performed in two real environments as well as on several simulated experiments. As expected, the comparison of different sub-sampling strategies revealed that more recent measurements are more informative to derive an estimate of the current gas distribution as long as a sufficient spatial coverage is given. Next, we compared a time-dependent gas distribution modelling approach (TD Kernel DM+V), which includes a recency weight, to the state-of-the-art gas distribution modelling approach (Kernel DM+V), which does not consider sampling times. The results indicate a consistent improvement in the prediction of unseen measurements, particularly in dynamic scenarios. Furthermore, this paper discusses the impact of meta-parameters in model selection and compares the performance of time-dependent GDM in different plume conditions. Finally, we investigated how to set the target time for which the model is created. The results indicate that TD Kernel DM+V performs best when the target time is set to the maximum sampling time in the test set.
|
|
| 3. |
- Fan, Han, 1989-, et al.
(författare)
-
A cluster analysis approach based on exploiting density peaks for gas discrimination with electronic noses in open environments
- 2018
-
Ingår i: Sensors and actuators. B, Chemical. - Amsterda, Netherlands : Elsevier. - 0925-4005 .- 1873-3077. ; 259, s. 183-203
-
Tidskriftsartikel (refereegranskat)abstract
- Gas discrimination in open and uncontrolled environments based on smart low-cost electro-chemical sensor arrays (e-noses) is of great interest in several applications, such as exploration of hazardous areas, environmental monitoring, and industrial surveillance. Gas discrimination for e-noses is usually based on supervised pattern recognition techniques. However, the difficulty and high cost of obtaining extensive and representative labeled training data limits the applicability of supervised learning. Thus, to deal with the lack of information regarding target substances and unknown interferents, unsupervised gas discrimination is an advantageous solution. In this work, we present a cluster-based approach that can infer the number of different chemical compounds, and provide a probabilistic representation of the class labels for the acquired measurements in a given environment. Our approach is validated with the samples collected in indoor and outdoor environments using a mobile robot equipped with an array of commercial metal oxide sensors. Additional validation is carried out using a multi-compound data set collected with stationary sensor arrays inside a wind tunnel under various airflow conditions. The results show that accurate class separation can be achieved with a low sensitivity to the selection of the only free parameter, namely the neighborhood size, which is used for density estimation in the clustering process.
|
|
| 4. |
- Fan, Han, 1989-, et al.
(författare)
-
Ensemble Learning-Based Approach for Gas Detection Using an Electronic Nose in Robotic Applications
- 2022
-
Ingår i: Frontiers in Chemistry. - : Frontiers Media S.A.. - 2296-2646. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Detecting chemical compounds using electronic noses is important in many gas sensing related applications. A gas detection system is supposed to indicate a significant event, such as the presence of new chemical compounds or a noteworthy change of concentration levels. Existing gas detection methods typically rely on prior knowledge of target analytes to prepare a dedicated, supervised learning model. However, in some scenarios, such as emergency response, not all the analytes of concern are a priori known and their presence are unlikely to be controlled. In this paper, we take a step towards addressing this issue by proposing an ensemble learning-based approach (ELBA) that integrates several one-class classifiers and learns online. The proposed approach is initialized by training several one-class models using clean air only. During the sampling process, the initialized system detects the presence of chemicals, allowing to learn another one-class model and update existing models with self-labelled data. We validated the proposed approach with real-world experiments, in which a mobile robot equipped with an e-nose was remotely controlled to interact with different chemical analytes in an uncontrolled environment. We demonstrated that the ELBA algorithm not only can detect gas exposures but also recognize baseline responses under a suspect short-term sensor drift condition. Depending on the problem setups in practical applications, the present work can be easily hybridized to integrate other supervised learning models when the prior knowledge of target analytes is partially available.
|
|
| 5. |
- Fan, Han, 1989-, et al.
(författare)
-
Improving Gas Dispersal Simulation For Mobile Robot Olfaction : Using Robot-Created Occupancy Maps And Remote Gas Sensors In The Simulation Loop
- 2017
-
Ingår i: 2017 ISOCS/IEEE International Symposium on Olfaction andElectronic Nose (ISOEN 2017) Proceedings. - : IEEE conference proceedings. - 9781509023929 - 9781509023936
-
Konferensbidrag (refereegranskat)abstract
- Mobile robot platforms equipped with olfaction systems have been used in many gas sensing applications. However, in-field validation of mobile robot olfaction systems is time consuming, expensive, cumbersome and lacks repeatability. In order to address these issues, simulation tools are used. However, the available mobile robot olfaction simulations lack models for remote gas sensors, and the possibility to import geometrical representations of actual real-world environments in a convenient way. In this paper, we describe extensions to an open-source CFD-based filament gas dispersal simulator. These improvements arrow to use robot-created occupancy maps and offer remote sensing capabilities in the simulation loop. We demonstrate the novel features in an example application: we created a 3D map a complex indoor environment, and performed a gas emission monitoring task with a Tunable Diode Laser Absorption Spectroscopy based remote gas sensor in a simulated version of the environment.
|
|
| 6. |
- Fan, Han, 1989-
(författare)
-
Robot-aided Gas Sensing for Emergency Responses
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Emergency response personnel can be exposed to various extreme hazards during the response to natural and human-made disasters. In many of the scenarios, one of the risk factors is the presence of hazardous airborne chemicals. Addressing this risk factor requires typical tiring, taxing and toxic operations that are suitable to be aided by Mobile Robot Olfaction (MRO) techniques. MRO is the research domain combining intelligent mobile robots with an artificial sense of smell. It presents the prospect of practical applications for emergency response as it allows to convey useful information on-site and online without risking the safety of human responders. However, standard gas sampling procedures for laboratory use are not directly applicable to MRO due to the complexity of uncontrolled environments and the need for fast deployment and analysis. Besides, state-of-the-art gas sensing approaches have difficulties handling A Priori Unknown Gases (APUG). In APUG situations, the number or/and identities of the present chemicals are unknown, posing challenges in recognizing the underlying risks with conventional solutions such as supervised learning-based electronic noses or dedicated gas sensors targeting known analytes.This dissertation focuses on contributions toward real-world applications of robot-aided gas sensing with an APUG problem setup. The dissertation starts with a requirement analysis of Gas Sensing for Emergency Response (GSER) to identify the key tasks in ad hoc applications. Considering that not all analytes of interest in a field application may be known in advance, a pipeline incorporating non-supervised detection and discrimination of multiple chemicals and consequent distribution modelling is found to be important for GSER. The remainder of the thesis fills this pipeline with three steps: 1) An ensemble learning-based gas detection approach is proposed to recognize significant changes from sensor signals as well as model the baseline response pattern. 2) A clustering analysis-based gas discrimination approach is developed to perform online analysis that automatically learns the number of different chemical compounds from the acquired measurements and provides a probabilistic representation of their class labels. 3) The integration of the proposed non-supervised gas detection and gas discrimination approaches with gas distribution modelling allows prototyping of a GSER system, which can enhance emergency responders’ situational awareness in the target environment. This GSER system demonstrates the concept of discriminating and mapping multiple unknown chemical compounds in uncontrolled environments with validation and evaluation using real-world data sets.During the research on the GSER system, gas dispersal simulation is also investigated to facilitate MRO algorithm development and validation in general. In-field experiments of MRO algorithms are often time-consuming, expensive, cumber some, and lack repeatability, while most of the available simulation tools are limited to insitu gas sensors and simple environments. These issues were addressed by improving a simulation framework to replicate geometrical representations of actual real-world environments and support a variety of gas sensor models. The potential applicability of the resulting work is demonstrated by simulating a gas emission monitoring task and facilitating the development process of a state-of-the-art time-dependent gas distribution modelling algorithm.
|
|
| 7. |
- Fan, Han, 1989-, et al.
(författare)
-
Semi-supervised Gas Detection Using an Ensemble of One-class Classifiers
- 2019
-
Ingår i: 18th ISOCS/IEEE International Symposium on Olfaction and Electronic Nose (ISOEN). - : IEEE.
-
Konferensbidrag (refereegranskat)abstract
- Detecting chemical compounds using electronic noses is important in many gas sensing related applications. Existing gas detection methods typically use prior knowledge of the target analytes. However, in some scenarios, the analytes to be detected are not fully known in advance, and preparing a dedicated model is not possible. To address this issue, we propose a gas detection approach using an ensemble of one-class classifiers. The proposed approach is initialized by learning a Mahalanobis-based and a Gaussian based model using clean air only. During the sampling process, the presence of chemicals is detected by the initialized system, which allows to learn a one-class nearest neighbourhood model without supervision. From then on the gas detection considers the predictions of the three one-class models. The proposed approach is validated with real-world experiments, in which a mobile robot equipped with an e-nose was remotely controlled to interact with different chemical analytes in an open environment.
|
|
| 8. |
- Fan, Han, 1989-, et al.
(författare)
-
Towards Gas Discrimination and Mapping in Emergency Response Scenarios Using a Mobile Robot with an Electronic Nose
- 2019
-
Ingår i: Sensors. - : MDPI. - 1424-8220. ; 19:3
-
Tidskriftsartikel (refereegranskat)abstract
- Emergency personnel, such as firefighters, bomb technicians, and urban search and rescue specialists, can be exposed to a variety of extreme hazards during the response to natural and human-made disasters. In many of these scenarios, a risk factor is the presence of hazardous airborne chemicals. The recent and rapid advances in robotics and sensor technologies allow emergency responders to deal with such hazards from relatively safe distances. Mobile robots with gas-sensing capabilities allow to convey useful information such as the possible source positions of different chemicals in the emergency area. However, common gas sampling procedures for laboratory use are not applicable due to the complexity of the environment and the need for fast deployment and analysis. In addition, conventional gas identification approaches, based on supervised learning, cannot handle situations when the number and identities of the present chemicals are unknown. For the purpose of emergency response, all the information concluded from the gas detection events during the robot exploration should be delivered in real time. To address these challenges, we developed an online gas-sensing system using an electronic nose. Our system can automatically perform unsupervised learning and update the discrimination model as the robot is exploring a given environment. The online gas discrimination results are further integrated with geometrical information to derive a multi-compound gas spatial distribution map. The proposed system is deployed on a robot built to operate in harsh environments for supporting fire brigades, and is validated in several different real-world experiments of discriminating and mapping multiple chemical compounds in an indoor open environment. Our results show that the proposed system achieves high accuracy in gas discrimination in an online, unsupervised, and computationally efficient manner. The subsequently created gas distribution maps accurately indicate the presence of different chemicals in the environment, which is of practical significance for emergency response.
|
|
| 9. |
- Fan, Han, 1989-, et al.
(författare)
-
Towards Gas Identification in Unknown Mixtures Using an Electronic Nose with One-Class Learning
- 2022
-
Ingår i: 2022 IEEE International Symposium on Olfaction and Electronic Nose (ISOEN). - : IEEE. - 9781665458610 - 9781665458603
-
Konferensbidrag (refereegranskat)abstract
- Gas identification using an electronic nose (e-nose) typically relies on a multi-class classifier trained with extensive data of a limited set of target analytes. Usually, classification performance degrades in the presence of mixtures that include interferents not represented in the training data. This issue limits the applicability of e-noses in real-world scenarios where interferents are a priori unknown. This paper investigates the feasibility of tackling this particular gas identification problem using one-class learning. We propose several training strategies for a one-class support vector machine to deal with gas mixtures composed of a target analyte and an interferent at different concentration levels. Our evaluation indicates that accurate identification of the presence of a target analyte is achievable if it is dominant in a mixture. For interferent-dominant mixtures, extensive training is required, which implies that an improvement in the generalization ability of the one-class model is needed.
|
|
| 10. |
- Fan, Han, 1989-, et al.
(författare)
-
Unsupervised gas discrimination in uncontrolled environments by exploiting density peaks
- 2016
-
Ingår i: 2016 IEEE SENSORS. - : Institute of Electrical and Electronics Engineers (IEEE). - 9781479982875
-
Konferensbidrag (refereegranskat)abstract
- Gas discrimination with Open Sampling Systems based on low-cost electro-chemical sensor arrays is of great interest in several applications, such as exploration of hazardous areas and environmental monitoring. Due to the lack of labeled training data or the high costs of obtaining them, as well as the presence of unknown interferents in the target environments, supervised learning is often not applicable and thus, unsupervised learning is an interesting alternative. In this work, we present a cluster analysis approach that can infer the number of different chemical compounds and label the measurements in a given uncontrolled environment without relying on previously acquired training data. Our approach is validated with data collected in indoor and outdoor environments by a mobile robot equipped with an array of metal oxide sensors. The results show that high classification accuracy can be achieved with a rather low sensitivity to the selection of the only functional parameter of our proposed algorithm.
|
|
