| 1. |
- Ademuyiwa, Adesoji O., et al.
(författare)
-
Determinants of morbidity and mortality following emergency abdominal surgery in children in low-income and middle-income countries
- 2016
-
Ingår i: BMJ Global Health. - : BMJ Publishing Group Ltd. - 2059-7908. ; 1:4
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Child health is a key priority on the global health agenda, yet the provision of essential and emergency surgery in children is patchy in resource-poor regions. This study was aimed to determine the mortality risk for emergency abdominal paediatric surgery in low-income countries globally.Methods: Multicentre, international, prospective, cohort study. Self-selected surgical units performing emergency abdominal surgery submitted prespecified data for consecutive children aged <16 years during a 2-week period between July and December 2014. The United Nation's Human Development Index (HDI) was used to stratify countries. The main outcome measure was 30-day postoperative mortality, analysed by multilevel logistic regression.Results: This study included 1409 patients from 253 centres in 43 countries; 282 children were under 2 years of age. Among them, 265 (18.8%) were from low-HDI, 450 (31.9%) from middle-HDI and 694 (49.3%) from high-HDI countries. The most common operations performed were appendectomy, small bowel resection, pyloromyotomy and correction of intussusception. After adjustment for patient and hospital risk factors, child mortality at 30 days was significantly higher in low-HDI (adjusted OR 7.14 (95% CI 2.52 to 20.23), p<0.001) and middle-HDI (4.42 (1.44 to 13.56), p=0.009) countries compared with high-HDI countries, translating to 40 excess deaths per 1000 procedures performed.Conclusions: Adjusted mortality in children following emergency abdominal surgery may be as high as 7 times greater in low-HDI and middle-HDI countries compared with high-HDI countries. Effective provision of emergency essential surgery should be a key priority for global child health agendas.
|
|
| 2. |
- Asadi, Shahla, et al.
(författare)
-
Determinants of Intention to Use Simulation-Based Learning in Computers and Networking Courses : An ISM and MICMAC Analysis
- 2024
-
Ingår i: IEEE transactions on engineering management. - : IEEE. - 0018-9391 .- 1558-0040. ; 71, s. 6015-6030
-
Tidskriftsartikel (refereegranskat)abstract
- Simulation-based learning (SBL) presents a wide variety of opportunities to practice complex computer and networking skills in higher education, employing various platforms to enhance educational outcomes. The integration of SBL tools in teaching computer networking courses is useful for both instructors and learners. Furthermore, the increasing importance of SBL in higher education highlights the necessity to further explore the factors that affect the adoption of SBL technologies, particularly in the field of computer networking courses. Despite these advantages, minimal effort has been made to examine the factors that impact instructors' intentions to use SBL tools for computers and networking courses. The main objective of this study is to examine the factors that affect instructors' intentions to utilize SBL tools in computer networking courses offered by higher education institutions. By employing Interpretive structural modeling (ISM) and Matriced' Impacts Croise's Multiplication Appliquee a UN Classement (MICMAC) analysis, the research attempts to provide an in-depth understanding of the interdependencies and hierarchical associations among twelve identified factors. Results showed that system quality, self-efficacy, technological knowledge, and information quality have high driving power. This study offers valuable perspectives for higher education institutions and for upcoming empirical studies and aids in comprehending the advantages of using SBL tools in teaching and higher education.
|
|
| 3. |
- Barrera Diaz, Carlos Alberto, 1987-, et al.
(författare)
-
Optimizing reconfigurable manufacturing systems : A Simulation-based Multi-objective Optimization approach
- 2021
-
Ingår i: Procedia CIRP. - : Elsevier. - 2212-8271. ; 104, s. 1837-1842
-
Tidskriftsartikel (refereegranskat)abstract
- Application of reconfigurable manufacturing systems (RMS) plays a significant role in manufacturing companies’ success in the current fiercely competitive market. Despite the RMS’s advantages, designing these systems to achieve a high-efficiency level is a complex and challenging task that requires the use of optimization techniques. This study proposes a simulation-based optimization approach for optimal allocation of work tasks and resources (i.e., machines) to workstations. Three conflictive objectives, namely maximizing the throughput, minimizing the buffers’ capacity, and minimizing the number of machines, are optimized simultaneously while considering the system’s stochastic behavior to achieve the desired system’s configuration.
|
|
| 4. |
- Beheshtinia, Mohammad Ali, et al.
(författare)
-
A fuzzy three-dimensional house of quality to integrate and coordinate departments’ activities in organizations
- 2023
-
Ingår i: IEEE Access. - : IEEE. - 2169-3536.
-
Tidskriftsartikel (refereegranskat)abstract
- This study aims to introduce a method to integrate and coordinate departments’ activities to enhance the service quality of organizations using Quality Function Deployment (QFD). To this purpose, the classical two-dimensional House Of Quality (HOQ) matrix is changed to a three-dimensional form (3D-HOQ). The 3D-HOQ is applied to the marketing and Human Resources (HR) departments of a bank to determine customers’ and employees’ demands, respectively. The 3D-HOQ is also employed to provide a unique list of technical requirements to satisfy the identified demands. Obtaining a unique list of technical requirements with the cooperation of both departments reduces the inconsistency between departments, saves cost and time by preventing reworks and parallel works, and increases the organization’s efficiency. Moreover, 3D-HOQ is combined with the SERVQUAL technique and fuzzy theory to determine the weight of obtained technical requirements. The study is conducted in four main steps, (1) identifying the customers’ and employees’ demands, (2) identifying the technical requirements for simultaneous satisfaction of both customers’ and employees’ demands, (3) determining the relationships between the technical requirements and the identified demands, and (4) prioritizing technical requirements. Applying the 3D-HOQ resulted in identifying 30 customers’ demands, 30 employees’ demands, and 50 technical requirements. The study results show that "using new banking technologies" has the highest weight among the customers’ demands, and "job security" has been found to have the highest weight among employees’ demands. Moreover, "Intra-organizational processes automation" has been identified as the technical requirement with the highest weight.
|
|
| 5. |
- Beheshtinia, Mohammad Ali, et al.
(författare)
-
A Fuzzy Three-Dimensional House of Quality to Integrate and Coordinate Departments' Activities in Organizations
- 2023
-
Ingår i: IEEE Access. - : Institute of Electrical and Electronics Engineers (IEEE). - 2169-3536. ; 11, s. 90538-90553
-
Tidskriftsartikel (refereegranskat)abstract
- This study aims to introduce a method to integrate and coordinate departments' activities to enhance the service quality of organizations using Quality Function Deployment (QFD). To this purpose, the classical two-dimensional House Of Quality (HOQ) matrix is changed to a three-dimensional form (3D-HOQ). The 3D-HOQ is applied to the marketing and Human Resources (HR) departments of a bank to determine customers' and employees' demands, respectively. The 3D-HOQ is also employed to provide a unique list of technical requirements to satisfy the identified demands. Obtaining a unique list of technical requirements with the cooperation of both departments reduces the inconsistency between departments, saves cost and time by preventing reworks and parallel works, and increases the organization's efficiency. Moreover, 3D-HOQ is combined with the SERVQUAL technique and fuzzy theory to determine the weight of obtained technical requirements. The study is conducted in four main steps: 1) identifying the customers' and employees' demands; 2) identifying the technical requirements for simultaneous satisfaction of both customers' and employees' demands; 3) determining the relationships between the technical requirements and the identified demands; and 4) prioritizing technical requirements. Applying the 3D-HOQ resulted in identifying 30 customers' demands, 30 employees' demands, and 50 technical requirements. The study results show that "using new banking technologies" has the highest weight among the customers' demands, and "job security" has been found to have the highest weight among employees' demands. Moreover, "Intraorganizational processes automation" has been identified as the technical requirement with the highest weight.
|
|
| 6. |
- Beheshtinia, Mohammad Ali, et al.
(författare)
-
A Genetic Algorithm with Multiple Populations to Reduce Fuel Consumption in Supply Chain
- 2021
-
Ingår i: International Journal of Transportation Engineering. - : Tarahan Parseh Transportation Research Institute. - 2322-259X. ; 8:3, s. 225-246
-
Tidskriftsartikel (refereegranskat)abstract
- Reducing fuel consumption by transportation fleet in a supply chain, reduces transportation costs and consequently, the product final cost. Moreover, it reduces environmental pollution, and in some cases, it helps governments constitute less subsidies for fuels. In this paper, a supply chain scheduling is studied, with the two objective functions of minimizing the total fuel consumption, and the total order delivery time. After presenting the mathematical model of the problem, a genetic algorithm, named Social Genetic Algorithm (SGA) is proposed to solve it. The proposed algorithm helps decision makers determine the allocation of orders to the suppliers and vehicles and production and transportation scheduling to minimize total order delivery time and fuel consumption. In order for SGA performance evaluation, its results are compared with another genetic algorithm in the literature and optimal solution. Finally, a sensitivity analysis is performed on SGA. The results of comparisons also show the high performance of SGA. Moreover, by increasing the number of suppliers and vehicles and decreasing the number of orders, the value of the objective function is reduced.
|
|
| 7. |
- Beheshtinia, Mohammad Ali, et al.
(författare)
-
Energy‐efficient and sustainable supply chain in the manufacturing industry
- 2023
-
Ingår i: Energy Science & Engineering. - : John Wiley & Sons. - 2050-0505. ; 11:1, s. 357-382
-
Tidskriftsartikel (refereegranskat)abstract
- This study aims at reducing energy consumption in supply chain networks by providing optimal integrated production and transportation scheduling. The considered supply chain consists of one main manufacturing center, multiple production units (i.e., suppliers), and multiple heterogeneous vehicles as the transportation fleet. To schedule this complex supply chain network in an energy-efficient way, several decisions should be made concerning the assignment of orders to suppliers and determining their production sequence, splitting orders, assigning orders to vehicles, and assigning delivery priority to orders. To cope with the problem, a mixed-integer linear programming model is presented. Due to the complexity of the problem, a novel development of the genetic algorithm named the Multiple Reference Group Genetic Algorithm (MRGGA) is also proposed. Four objectives are considered to be optimized to meet both suitability and energy-efficiency aspects in the supply chain network. These optimization objectives are to minimize the total orders' delivery times to the manufacturing center, fuel consumption by the vehicles, energy consumption at supplies, and maximize orders' quality. To analyze the performance of the proposed algorithm, a real case and a set of generated instances are solved. The results obtained by the proposed algorithm are compared with an existing genetic algorithm in the literature. Moreover, the results are also compared with the optimal solutions obtained from the mathematical model for small-size problems. The results of the comparisons show the efficiency of the proposed MRGGA in finding energy-efficient solutions for the considered supply chain network.
|
|
| 8. |
- Beheshtinia, Mohammad Ali, et al.
(författare)
-
Evaluating and prioritizing the healthcare waste disposal center locations using a hybrid multi-criteria decision-making method
- 2023
-
Ingår i: Scientific Reports. - : Springer Nature. - 2045-2322. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Healthcare waste disposal center location (HCWDCL) impacts the environment and the health of living beings. Different and sometimes contradictory criteria in determining the appropriate site location for disposing of healthcare waste (HCW) complicate the decision-making process. This research presents a hybrid multi-criteria decision-making (MCDM) method, named PROMSIS, to determine the appropriate HCWDCL in a real case. The PROMSIS is the combination of two well-known MCDM methods, namely TOPSIS and PROMETHEE. Moreover, fuzzy theory is used to describe the uncertainties of the problem parameters. To provide a reliable decision on selecting the best HCWDCL, a comprehensive list of criteria is identified through a literature review and experts’ opinions obtained from the case study. In total, 40 criteria are identified and classified into five major criteria, namely economic, environmental, social, technical, and geological. The weight of the considered criteria is determined by the Analytical Hierarchy Process (AHP) method. Then, the score of the alternative HCWDCLs in each considered criterion is obtained. Finally, the candidate locations for disposing of HCWs are ranked by the proposed fuzzy PROMSIS method. The results show that the most important criteria in ranking the alternatives in the studied case are economic, environmental, and social, respectively. Moreover, the sub-criteria of operating cost, transportation cost, and pollution are identified as the most important sub-criteria, respectively.
|
|
| 9. |
- Beheshtinia, Mohammad Ali, et al.
(författare)
-
Identifying and prioritizing marketing strategies for the building energy management systems using a hybrid fuzzy MCDM technique
- 2023
-
Ingår i: Energy Science & Engineering. - : John Wiley & Sons. - 2050-0505. ; 11:11, s. 4324-4348
-
Tidskriftsartikel (refereegranskat)abstract
- Preventing energy waste in residential and office buildings has emerged as a critical issue in both developed and developing countries over recent decades. The growing demand for oil and energy reserves has amplified the urgency of this concern. The deployment of building energy management systems (BEMSs) can lead to timely responses to changes in environmental conditions, the prevention of energy wastage, a reduction in CO2 emissions, and an increase in the longevity of building equipment. Despite the undeniable benefits of BEMSs, their market size remains small, creating challenges for providers in reaching potential customers. This research seeks to identify and prioritize the marketing strategies for BEMSs. A case study was conducted, employing the “Strengths, Weaknesses, Opportunities, and Threats” analysis as a tool for identifying marketing strategies related to BEMSs. This method resulted in the identification of 18 distinct marketing strategies. These strategies were subsequently prioritized using a novel fuzzy multicriteria decision-making technique, VIkor-topSIS, considering six specific criteria. The findings of the study suggested a hierarchical influence of six criteria on the BEMS market, arranged in the following order of significance: effectiveness, cost, attainability, complexity, timing, and popularity. Furthermore, the top three marketing strategies for BEMSs were found to be internet advertising strategies, discounts to consumers, and online sales. The analysis of the results has also offered valuable insights into the strengths and weaknesses of the studied BEMS provider, as well as the opportunities and threats present within the BEMS market.
|
|
| 10. |
- Beheshtinia, Mohammad Ali, et al.
(författare)
-
Optimizing disaster relief goods distribution and transportation : a mathematical model and metaheuristic algorithms
- 2023
-
Ingår i: APPLIED MATHEMATICS IN SCIENCE AND ENGINEERING. - : TAYLOR & FRANCIS LTD. - 2769-0911. ; 31:1
-
Tidskriftsartikel (refereegranskat)abstract
- The effective distribution of relief goods is critical in mitigating the impact of natural disasters and preserving human life. This study addresses a relief goods distribution problem, assuming the existence of multiple relief orders that must be delivered to various disaster-stricken regions from a network of warehouses using a fleet of diverse vehicles. The objective is to identify the most suitable warehouse for each relief order, allocate relief orders to vehicles, batch the orders in the designated vehicles, and devise routing plans to minimize the total delivery time. A mixed-integer linear programming model is formulated to tackle this problem. Owing to the problem's NP-hard nature, a metaheuristic algorithm, known as the Multiple League Championship Algorithm, is developed. Furthermore, two innovative variants of the MLCA , namely the League Base Multiple League Championship Algorithm (L- MLCA) and the Playoff Multiple League Championship Algorithm (P-MLCA), are introduced.Experimental results indicate that the P-MLCA outperforms the other two algorithms. The solutions derived from the P-MLCA are compared with the optimal solutions obtained by a commercial solver for small-scale problems. This comparative analysis demonstrates the promising performance of the P-MLCA in finding the optimal distribution of relief goods.
|
|
