| 1. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 2. |
|
|
| 3. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2016 Challenge Results
- 2016
-
Ingår i: COMPUTER VISION - ECCV 2016 WORKSHOPS, PT II. - Cham : SPRINGER INT PUBLISHING AG. - 9783319488813 - 9783319488806 ; , s. 777-823
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2016 aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 70 trackers are presented, with a large number of trackers being published at major computer vision conferences and journals in the recent years. The number of tested state-of-the-art trackers makes the VOT 2016 the largest and most challenging benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the Appendix. The VOT2016 goes beyond its predecessors by (i) introducing a new semi-automatic ground truth bounding box annotation methodology and (ii) extending the evaluation system with the no-reset experiment.
|
|
| 4. |
- Gao, Zhi xin, et al.
(författare)
-
Progress of passive enhanced heat transfer tubes
- 2017
-
Ingår i: Xiandai Huagong/Modern Chemical Industry. - 0253-4320. ; 37:3, s. 24-30
-
Forskningsöversikt (refereegranskat)abstract
- A review of several typical enhanced heat transfer tubes such as corrugated tube, transversally corrugated tube, twisted tube and spiral fluted tube, is carried out. Compared with smooth wall tube, these enhanced tubes have higher heat exchange capacity and better anti - fouling ability. Besides, the heat transfer efficiency can be promoted to a higher level if the objects that can disturb flow are put in the tubes. However, higher heat transfer efficiency of such enhanced heat transfer tubes can only be achieved under certain conditions. Therefore, new heat transfer tubes that could avoid the formation of mobile dead-zone should be designed to meet the broad applications or facilitate better heat transfer effect.
|
|
| 5. |
- Felsberg, Michael, 1974-, et al.
(författare)
-
The Thermal Infrared Visual Object Tracking VOT-TIR2016 Challenge Results
- 2016
-
Ingår i: Computer Vision – ECCV 2016 Workshops. ECCV 2016.. - Cham : SPRINGER INT PUBLISHING AG. - 9783319488813 - 9783319488806 ; , s. 824-849
-
Konferensbidrag (refereegranskat)abstract
- The Thermal Infrared Visual Object Tracking challenge 2016, VOT-TIR2016, aims at comparing short-term single-object visual trackers that work on thermal infrared (TIR) sequences and do not apply pre-learned models of object appearance. VOT-TIR2016 is the second benchmark on short-term tracking in TIR sequences. Results of 24 trackers are presented. For each participating tracker, a short description is provided in the appendix. The VOT-TIR2016 challenge is similar to the 2015 challenge, the main difference is the introduction of new, more difficult sequences into the dataset. Furthermore, VOT-TIR2016 evaluation adopted the improvements regarding overlap calculation in VOT2016. Compared to VOT-TIR2015, a significant general improvement of results has been observed, which partly compensate for the more difficult sequences. The dataset, the evaluation kit, as well as the results are publicly available at the challenge website.
|
|
| 6. |
- Jin, Zhi jiang, et al.
(författare)
-
Effects of pitch and corrugation depth on heat transfer characteristics in six-start spirally corrugated tube
- 2017
-
Ingår i: International Journal of Heat and Mass Transfer. - : Elsevier BV. - 0017-9310. ; 108, s. 1011-1025
-
Tidskriftsartikel (refereegranskat)abstract
- Spirally corrugated tube is one of the most important parts of coaxial heat exchangers. It can greatly improve the heat transfer efficiency of heat exchangers. Here, a novel spirally corrugated tube with six-start is proposed. However, up to now, there is little literature about the heat transfer performance and flow field of this novel six-start spirally corrugated tube. In this paper, the effects of geometric parameters (pitch p, corrugation depth e), Reynolds number Re and fluid properties on the heat transfer performances are investigated based on the validated numerical model. The results show that with the increasing of pitch p, both the heat transfer coefficient h and Nusselt number Nu decrease gradually. Meanwhile, with the increasing of corrugation depth e, both the secondary flow velocity vxy and the vorticity of longitudinal vortex increase gradually. Moreover, under the same working condition, the heat transfer performances of the six-start spirally corrugated tube are affected by both the working medium and Reynolds number. Finally, a criterion correlation for heat transfer calculation in the six-start spirally corrugated tube is proposed and validated to be reliable and suitable. This work can reveal the enhanced heat transfer mechanism of the six-start spirally corrugated tube and benefit the further research on heat transfer characteristics of multi-start spirally corrugated tube or other related devices.
|
|
| 7. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 8. |
- Li, Jian, et al.
(författare)
-
A 3D extra-large-pore zeolite enabled by 1D-to-3D topotactic condensation of a chain silicate
- 2023
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 379:6629, s. 283-287
-
Tidskriftsartikel (refereegranskat)abstract
- Zeolites are microporous silicates with a large variety of applications as catalysts, adsorbents, and cation exchangers. Stable silica-based zeolites with increased porosity are in demand to allow adsorption and processing of large molecules but challenge our synthetic ability. We report a new, highly stable pure silica zeolite called ZEO-3, which has a multidimensional, interconnected system of extra-large pores open through windows made by 16 and 14 silicate tetrahedra, the least dense polymorph of silica known so far. This zeolite was formed by an unprecedented one-dimensional to three-dimensional (1D-to-3D) topotactic condensation of a chain silicate. With a specific surface area of more than 1000 square meters per gram, ZEO-3 showed a high performance for volatile organic compound abatement and recovery compared with other zeolites and metal-organic frameworks.
|
|
| 9. |
- Liu, Tao, et al.
(författare)
-
16% efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend
- 2021
-
Ingår i: Joule. - : CELL PRESS. - 2542-4351. ; 5:4, s. 914-930
-
Tidskriftsartikel (refereegranskat)abstract
- A SUMMARY There is an urgent demand for all-polymer organic solar cells (AP-OSCs) to gain higher efficiency. Here, we successfully improve the performance to 16.09% by introducing a small amount of BN-T, a B <- N-type polymer acceptor, into the PM6:PY-IT blend. It has been found that BN-T makes the active layer, based on the PM6:PY-IT:BN-T ternary blend, more crystalline but meanwhile slightly reduces the phase separation, leading to enhancement of both exciton harvesting and charge transport. From a thermodynamic viewpoint, BN-T prefers to reside between PM6 and PY-IT, and the fraction of this fine-tunes the morphology. Besides, a significantly reduced nonradiative energy loss occurs in the ternary blend, along with the coexistence of energy and charge transfer between the two acceptors. The progressive performance facilitated by these improved properties demonstrates that AP-OSCs can possibly comparably efficient with those based on small molecule acceptors, further enhancing the competitiveness of this device type.
|
|
| 10. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
