| 1. |
- Al-Soubaihi, Rola, et al.
(författare)
-
Synthesis of hierarchically porous silica aerogel supported Palladium catalyst for low-temperature CO oxidation under ignition/extinction conditions
- 2020
-
Ingår i: Microporous and Mesoporous Materials. - : Elsevier. - 1387-1811 .- 1873-3093. ; 292
-
Tidskriftsartikel (refereegranskat)abstract
- Synthesis of well-dispersed palladium nanoparticles within silica aerogel pores with controlled size was carried out using sol-gel synthesis under supercritical ethanol drying. The high concentration of silanol groups on silica (SiO2) surface facilitated a superior palladium (Pd) loading up to 10 wt %. The synthesized Pd/SiO2 nanocomposite aerogels were characterized by X-ray diffraction (XRD), N2 adsorption-desorption, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and Fourier transform infrared (FTIR) spectroscopic methods. The silica aerogel supported catalysts were found to have a wide pore size distribution. TEM investigations confirmed that Pd nanocrystals were located within the SiO2 microspores and mesopores. The catalyst was evaluated for carbon monoxide (CO) oxidation reaction under ignition/extinction conditions. The synthesized catalyst demonstrated a high catalytic activity at low operating temperatures (<200 °C) compared to unsupported Pd nanoparticles or bare SiO2 aerogels. This enhancement in CO oxidation activity with Pd/SiO2 aerogel catalysts are attributed to the small Pd particles, Pd interaction with the surface of the underlying SiO2 and the better dispersion of Pd particles within the SiO2 pores. Porosity played a more important role during the extinction cycle as a result of the slow dissipation of the heat leading to hysteresis. We demonstrate the influence of porosity of catalyst supports on the size, dispersion, and catalytic activity of Pd nanoparticles.
|
|
| 2. |
- Alvarado Ávila, María Isabel, et al.
(författare)
-
Cellulose as sacrificial agents for enhanced photoactivated hydrogen production
- 2023
-
Ingår i: Sustainable Energy & Fuels. - : Royal Society of Chemistry (RSC). - 2398-4902. ; 7:8, s. 1981-1991
-
Tidskriftsartikel (refereegranskat)abstract
- The search for new energy sources together with the need to control greenhouse gas emissions has led to continued interest in low-emitting renewable energy technologies. In this context, water splitting for hydrogen production is a reasonable alternative to replace fossil fuels due to its high energy density producing only water during combustion. Cellulose is abundant in nature and as residuals from human activity, and therefore a natural, ecological, and carbon-neutral source for hydrogen production. In the present work, we propose a sustainable method for hydrogen production using sunlight and cellulose as sacrificial agents during the photocatalytic water splitting process. Platinum (Pt) catalyst activates hydrogen production, and parameters such as pH of the system, cellulose concentration, and Pt loading were studied. Using different biomasses, we found that the presence of hemicellulose and xyloglucan as part of the molecular composition considerably increased the H-2 production rate from 36 mu mol L-1 in one hour for rapeseed cellulose to 167.44 mu mol L-1 for acid-treated cellulose isolated from Ulva fenestrata algae. Carboxymethylation and TEMPO-oxidation of cellulosic biomass both led to more stable suspensions with higher rates of H-2 production close to 225 mu mol L-1, which was associated with their water solubility properties. The results suggest that cellulosic biomass can be an attractive alternative as a sacrificial agent for the photocatalytic splitting of water for H-2 production.
|
|
| 3. |
- Bahari, Helma Sadat, et al.
(författare)
-
Chitosan nanocomposite coatings with enhanced corrosion inhibition effects for copper
- 2020
-
Ingår i: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 162, s. 1566-1577
-
Tidskriftsartikel (refereegranskat)abstract
- A biopolymer coating on copper was prepared based on chitosan nanocomposite and its corrosion inhibition efficiency was investigated. Inclusion of silica nanoparticles substantially reduces swelling ratio of chitosan coating while enhancing its thermal stability. The corrosion resistance of chitosan-based coatings is improved by introducing 2-mercaptobenzothiazole and silica in the matrix. It is found that upon crosslinking the chitosan coatings, a higher corrosion resistance could be achieved and the highest inhibition efficiency for chitosan nanocomposite coatings is calculated as 85%. The corrosion mechanism is found closely related to mass transition and diffusion process, and also the polarization resistance contributes to the impedance. Calculated impedance using Kramers-Kronig transformation shows good agreement with experimental values, thus validating the impedance measurements. This study exhibits the enhanced efficiency of nanocomposite and potential of chitosan coatings in corrosion prevention for copper.
|
|
| 4. |
- Ciobanu, V., et al.
(författare)
-
Large-Sized Nanocrystalline Ultrathin β-Ga2 O3 Membranes Fabricated by Surface Charge Lithography
- 2022
-
Ingår i: Nanomaterials. - : MDPI AG. - 2079-4991. ; 12:4
-
Tidskriftsartikel (refereegranskat)abstract
- Large-sized 2D semiconductor materials have gained significant attention for their fascinat-ing properties in various applications. In this work, we demonstrate the fabrication of nanoperforated ultrathin β-Ga2 O3 membranes of a nanoscale thickness. The technological route includes the fabrication of GaN membranes using the Surface Charge Lithography (SCL) approach and subsequent thermal treatment in air at 900◦ C in order to obtain β-Ga2 O3 membranes. The as-grown GaN membranes were discovered to be completely transformed into β-Ga2 O3, with the morphology evolving from a smooth topography to a nanoperforated surface consisting of nanograin structures. The oxidation mechanism of the membrane was investigated under different annealing conditions followed by XPS, AFM, Raman and TEM analyses.
|
|
| 5. |
- Das, Biswanath, et al.
(författare)
-
Bifunctional and regenerable molecular electrode for water electrolysis at neutral pH
- 2023
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 11:25, s. 13331-13340
-
Tidskriftsartikel (refereegranskat)abstract
- The instability of molecular electrodes under oxidative/reductive conditions and insufficient understanding of the metal oxide-based systems have slowed down the progress of H2-based fuels. Efficient regeneration of the electrode's performance after prolonged use is another bottleneck of this research. This work represents the first example of a bifunctional and electrochemically regenerable molecular electrode which can be used for the unperturbed production of H2 from water. Pyridyl linkers with flexible arms (–CH2–CH2–) on modified fluorine-doped carbon cloth (FCC) were used to anchor a highly active ruthenium electrocatalyst [RuII(mcbp)(H2O)2] (1) [mcbp2− = 2,6-bis(1-methyl-4-(carboxylate)benzimidazol-2-yl)pyridine]. The pyridine unit of the linker replaces one of the water molecules of 1, which resulted in RuPFCC (ruthenium electrocatalyst anchored on –CH2–CH2–pyridine modified FCC), a high-performing electrode for oxygen evolution reaction [OER, overpotential of ∼215 mV] as well as hydrogen evolution reaction (HER, overpotential of ∼330 mV) at pH 7. A current density of ∼8 mA cm−2 at 2.06 V (vs. RHE) and ∼−6 mA cm−2 at −0.84 V (vs. RHE) with only 0.04 wt% loading of ruthenium was obtained. OER turnover of >7.4 × 103 at 1.81 V in 48 h and HER turnover of >3.6 × 103 at −0.79 V in 3 h were calculated. The activity of the OER anode after 48 h use could be electrochemically regenerated to ∼98% of its original activity while it serves as a HE cathode (evolving hydrogen) for 8 h. This electrode design can also be used for developing ultra-stable molecular electrodes with exciting electrochemical regeneration features, for other proton-dependent electrochemical processes.
|
|
| 6. |
- Das, Biswanath, et al.
(författare)
-
Cobalt Electrocatalyst on Fluorine Doped Carbon Cloth – a Robust and Partially Regenerable Anode for Water Oxidation
- 2022
-
Ingår i: ChemCatChem. - : Wiley. - 1867-3880 .- 1867-3899. ; 14:18
-
Tidskriftsartikel (refereegranskat)abstract
- The low stability of the electrocatalysts at water oxidation (WO) conditions and the use of expensive noble metals have obstructed large-scale H2 production from water. Herein, we report the electrocatalytic WO activity of a cobalt-containing, water-soluble molecular WO electrocatalyst [CoII(mcbp)(OH2)] (1) [mcbp2−=2,6-bis(1-methyl-4-(carboxylate)benzimidazol-2-yl)pyridine] in homogeneous conditions (overpotential of 510 mV at pH 7 phosphate buffer) and after anchoring it on pyridine-modified fluorine-doped carbon cloth (PFCC). The formation of cobalt phosphate was identified only after 4 h continuous oxygen evolution in homogeneous conditions. Interestingly, a significant enhancement of the stability and WO activity (current density of 5.4 mA/cm2 at 1.75 V) was observed for 1 after anchoring onto PFCC, resulting in a turnover (TO) of >3.6×103 and average TOF of 0.05 s−1 at 1.55 V (pH 7) over 20 h. A total TO of >21×103 over 8 days was calculated. The electrode allowed regeneration of∼ 85 % of the WO activity electrochemically after 36 h of continuous oxygen evolution.
|
|
| 7. |
- Falfushynska, Halina I., et al.
(författare)
-
The effects of ZnO nanostructures of different morphology on bioenergetics and stress response biomarkers of the blue mussels Mytilus edulis
- 2019
-
Ingår i: Science of the Total Environment. - : ELSEVIER. - 0048-9697 .- 1879-1026. ; 694
-
Tidskriftsartikel (refereegranskat)abstract
- Biofouling causes massive economical losses in the maritime sector creating an urgent need for effective and ecologically non-harmful antifouling materials. Zinc oxide (ZnO) nanorod coatings show promise as an antifouling material; however, the toxicity of ZnO nanorods to marine organisms is not known. We compared the toxicity of suspended ZnO nanorods (NR) with that of ZnO nanoparticles (NP) and ionic Zn2+ in amarine bivalve Mytilus edulis exposed for two weeks to 10 or 100 mu g Zn L-1 of ZnO NPs, NRs or Zn2+, or to immobilized NRs. The multi-biomarker assessment included bioenergetics markers (tissue energy reserves, activity ofmitochondrial electron transport system and autophagic enzymes), expression of apoptotic and inflammatory genes, and general stress biomarkers (oxidative lesions, lysosomalmembrane stability and metallothionein expression). Exposure to ZnO NPs, NRs and Zn2+ caused accumulation of oxidative lesions in proteins and lipids, stimulated autophagy, and led to lysosomal membrane destabilization indicating toxicity. However, these responses were not specific for the form of Zn (NPs, NR or Zn2+) and showed no monotonous increase with increasing Zn concentrations in the experimental exposures. No major disturbance of the energy status was found in the mussels exposed to ZnO NPs, NRs, or Zn2+. Exposure to ZnO NPs and NRs led to a strong induction of apoptosis- and inflammation-related genes, which was not seen in Zn2+ exposures. Based on the integrated biomarker response, the overall toxicity as well as the pro-apoptotic and pro-inflammatory action was stronger in ZnO NPs compared with the NRs. Given the stability of ZnO NR coatings and the relatively low toxicity of suspended ZnO NR, ZnO NR coating might be considered a promising low-toxicity material for antifouling paints.
|
|
| 8. |
- Kumar, Santosh, et al.
(författare)
-
Chitosan Nanocomposite Coatings Containing Chemically Resistant ZnO-SnOx Core-shell Nanoparticles for Photocatalytic Antifouling
- 2021
-
Ingår i: International Journal of Molecular Sciences. - : MDPI. - 1661-6596 .- 1422-0067. ; 22:9
-
Tidskriftsartikel (refereegranskat)abstract
- Functional nanocomposites with biopolymers and zinc oxide (ZnO) nanoparticles is an emerging application of photocatalysis in antifouling coatings. The reduced chemical stability of ZnO in the acidic media in which chitosan is soluble affects the performance of chitosan nanocomposites in antifouling applications. In this study, a thin shell of amorphous tin dioxide (SnOx) was grown on the surface of ZnO to form ZnO-SnOx core-shell nanoparticles that improved the chemical stability of the photocatalyst nanoparticles, as examined at pH 3 and 6. The photocatalytic activity of ZnO-SnOx in the degradation of methylene blue (MB) dye under visible light showed a higher efficiency than that of ZnO nanoparticles due to the passivation of electronic defects. Chitosan-based antifouling coatings with varying percentages of ZnO or ZnO-SnOx nanoparticles, with or without the glutaraldehyde (GA) crosslinking of chitosan, were developed and studied. The incorporation of photocatalysts into the chitosan matrix enhanced the thermal stability of the coatings. Through a mesocosm study using running natural seawater, it was found that chitosan/ZnO-SnOx/GA coatings enabled better inhibition of bacterial growth compared to chitosan coatings alone. This study demonstrates the antifouling potential of chitosan nanocomposite coatings containing core-shell nanoparticles as an effective solution for the prevention of biofouling.
|
|
| 9. |
- Kumar, Santosh, et al.
(författare)
-
Nanocoating Is a New Way for Biofouling Prevention
- 2021
-
Ingår i: Frontiers in Nanotechnology. - : Frontiers Media SA. - 2673-3013. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- Biofouling is a major concern to the maritime industry. Biofouling increases fuel consumption, accelerates corrosion, clogs membranes and pipes, and reduces the buoyancy of marine installations, such as ships, platforms, and nets. While traditionally marine installations are protected by toxic biocidal coatings, due to recent environmental concerns and legislation, novel nanomaterial-based anti-fouling coatings are being developed. Hybrid nanocomposites of organic-inorganic materials give a possibility to combine the characteristics of both groups of material generating opportunities to prevent biofouling. The development of bio-inspired surface designs, progress in polymer science and advances in nanotechnology is significantly contributing to the development of eco-friendly marine coatings containing photocatalytic nanomaterials. The review mainly discusses photocatalysis, antifouling activity, and formulation of coatings using metal and metal oxide nanomaterials (nanoparticles, nanowires, nanorods). Additionally, applications of nanocomposite coatings for inhibition of micro- and macro-fouling in marine environments are reviewed.
|
|
| 10. |
- Li, L., et al.
(författare)
-
Ruthenium containing molecular electrocatalyst on glassy carbon for electrochemical water splitting
- 2022
-
Ingår i: Dalton Transactions. - : Royal Society of Chemistry (RSC). - 1477-9226 .- 1477-9234. ; 51:20, s. 7957-7965
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochemical water splitting constitutes one of the most promising strategies for converting water into hydrogen-based fuels, and this technology is predicted to play a key role in the transition towards a carbon-neutral energy economy. To enable the design of cost-effective electrolysis cells based on this technology, new and more efficient anodes with augmented water splitting activity and stability will be required. Herein, we report an active molecular Ru-based catalyst for electrochemically-driven water oxidation (overpotential of ∼395 mV at pH 7 phosphate buffer) and two simple methods for preparing anodes by attaching this catalyst onto glassy carbon through multi-walled carbon nanotubes to improve stability as well as reactivity. The anodes modified with the molecular catalyst were characterized by a broad toolbox of microscopy and spectroscopy techniques, and interestingly no RuO2 formation was detected during electrocatalysis over 4 h. These results demonstrate that the herein presented strategy can be used to prepare anodes that rival the performance of state-of-the-art metal oxide anodes.
|
|
