| 1. |
|
|
| 2. |
- Enrico, Alessandro, et al.
(författare)
-
Cleanroom-Free Direct Laser Micropatterning of Polymers for Organic Electrochemical Transistors in Logic Circuits and Glucose Biosensors
- 2024
-
Ingår i: Advanced Science. - : Wiley. - 2198-3844.
-
Tidskriftsartikel (refereegranskat)abstract
- Organic electrochemical transistors (OECTs) are promising devices for bioelectronics, such as biosensors. However, current cleanroom-based microfabrication of OECTs hinders fast prototyping and widespread adoption of this technology for low-volume, low-cost applications. To address this limitation, a versatile and scalable approach for ultrafast laser microfabrication of OECTs is herein reported, where a femtosecond laser to pattern insulating polymers (such as parylene C or polyimide) is first used, exposing the underlying metal electrodes serving as transistor terminals (source, drain, or gate). After the first patterning step, conducting polymers, such as poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), or semiconducting polymers, are spin-coated on the device surface. Another femtosecond laser patterning step subsequently defines the active polymer area contributing to the OECT performance by disconnecting the channel and gate from the surrounding spin-coated film. The effective OECT width can be defined with high resolution (down to 2 mu m) in less than a second of exposure. Micropatterning the OECT channel area significantly improved the transistor switching performance in the case of PEDOT:PSS-based transistors, speeding up the devices by two orders of magnitude. The utility of this OECT manufacturing approach is demonstrated by fabricating complementary logic (inverters) and glucose biosensors, thereby showing its potential to accelerate OECT research. Ultrafast focused femtosecond laser has been introduced for the direct micropatterning of organic electrochemical transistors (OECTs), providing high resolution (2 mu m), selective cleanroom-free patterning of insulating and conjugated polymer layers while preserving device operation, and high flexibility in device design. The approach has been validated in the fabrication of complementary inverters and glucose biosensors.image
|
|
| 3. |
- Enrico, Alessandro, et al.
(författare)
-
Ultrafast Direct Writing of Polymers as a Simple Fabrication Method for Organic Electrochemical Transistors
- 2023
-
Ingår i: 2023 22nd International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers 2023. - : Institute of Electrical and Electronics Engineers Inc.. ; , s. 1543-1546
-
Konferensbidrag (refereegranskat)abstract
- Organic ionic/electronic conductors (OMIECs) offer a promising alternative to metals and inorganic semiconductors for direct interfacing between human-made electronics and biological tissues. A device that takes advantage of the mixed ionic/electronic conductivity of OMIEC materials is the organic electrochemical transistor (OECT). High-density OECTs are typically fabricated using costly cleanroom-based lithography and complex lift-off processes. To simplify the fabrication of OECTs, we propose laser direct writing of conjugated polymers using a commercial two-photon polymerization 3D printer. Ultrafast laser direct writing allows single-digit micrometer resolution and high-speed processing, thereby enabling a cost-effective and simple fabrication process.
|
|
| 4. |
- Li, Jian-Yang, et al.
(författare)
-
Ejecta from the DART-produced active asteroid Dimorphos
- 2023
-
Ingår i: Nature. - : Springer Nature. - 0028-0836 .- 1476-4687. ; 616, s. 452-456
-
Tidskriftsartikel (refereegranskat)abstract
- Some active asteroids have been proposed to be formed as a result of impact events1. Because active asteroids are generally discovered by chance only after their tails have fully formed, the process of how impact ejecta evolve into a tail has, to our knowledge, not been directly observed. The Double Asteroid Redirection Test (DART) mission of NASA2, in addition to having successfully changed the orbital period of Dimorphos3, demonstrated the activation process of an asteroid resulting from an impact under precisely known conditions. Here we report the observations of the DART impact ejecta with the Hubble Space Telescope from impact time T + 15 min to T + 18.5 days at spatial resolutions of around 2.1 km per pixel. Our observations reveal the complex evolution of the ejecta, which are first dominated by the gravitational interaction between the Didymos binary system and the ejected dust and subsequently by solar radiation pressure. The lowest-speed ejecta dispersed through a sustained tail that had a consistent morphology with previously observed asteroid tails thought to be produced by an impact4,5. The evolution of the ejecta after the controlled impact experiment of DART thus provides a framework for understanding the fundamental mechanisms that act on asteroids disrupted by a natural impact1,6.
|
|
| 5. |
|
|
| 6. |
- Ponticelli, Francesco, et al.
(författare)
-
Safety and efficacy of coronary sinus narrowing in chronic refractory angina: Insights from the RESOURCE study.
- 2021
-
Ingår i: International journal of cardiology. - : Elsevier BV. - 1874-1754 .- 0167-5273. ; 337, s. 29-37
-
Tidskriftsartikel (refereegranskat)abstract
- Refractory angina (RA) is considered the end-stage of coronary artery disease, and often has no interventional treatment options. Coronary sinus Reducer (CSR) is a recent addition to the therapeutic arsenal, but its efficacy has only been evaluated on small populations. The RESOURCE registry provides further insights into this therapy.The RESOURCE is an observational, retrospective registry that includes 658 patients with RA from 20 centers in Europe, United Kingdom and Israel. Prespecified endpoints were the amelioration of anginal symptoms evaluated with the Canadian Cardiovascular Society (CCS) score, the rates of procedural success and complications, and MACEs as composite of all-cause mortality, acute coronary syndromes, and stroke.At a median follow-up of 502days (IQR 225-1091) after CSR implantation, 39.7% of patients improved by ≥2 CCS classes (primary endpoint), and 76% by ≥1 class. Procedural success was achieved in 96.7% of attempts, with 3% of procedures aborted mostly for unsuitable coronary sinus anatomy. Any complication occurred in 5.7% of procedures, but never required bailout surgery nor resulted in intra- or periprocedural death or myocardial infarction. One patient developed periprocedural stroke after inadvertent carotid artery puncture. At the last available follow-up, overall mortality and MACE were 10.4% and 14.6% respectively. At one, three and five years, mortality rate at Kaplan-Meier analysis was 4%, 13.7%, and 23.4% respectively.CSR implantation is safe and reduces angina in patients with refractory angina.
|
|
| 7. |
- Shaegh, S. A. M., et al.
(författare)
-
A microfluidic optical platform for real-time monitoring of pH and oxygen in microfluidic bioreactors and organ-on-chip devices
- 2016
-
Ingår i: Biomicrofluidics. - : American Institute of Physics (AIP). - 1932-1058. ; 10:4
-
Tidskriftsartikel (refereegranskat)abstract
- There is a growing interest to develop microfluidic bioreactors and organ-on-chipplatforms with integrated sensors to monitor their physicochemical properties and tomaintain a well-controlled microenvironment for cultured organoids. Conventionalsensing devices cannot be easily integrated with microfluidic organ-on-chip systemswith low-volume bioreactors for continual monitoring. This paper reports on thedevelopment of a multi-analyte optical sensing module for dynamic measurementsof pH and dissolved oxygen levels in the culture medium. The sensing system wasconstructed using low-cost electro-optics including light-emitting diodes and siliconphotodiodes. The sensing module includes an optically transparent window formeasuring light intensity, and the module could be connected directly to a perfusionbioreactor without any specific modifications to the microfluidic device design. Acompact, user-friendly, and low-cost electronic interface was developed to controlthe optical transducer and signal acquisition from photodiodes. The platformenabled convenient integration of the optical sensing module with a microfluidicbioreactor. Human dermal fibroblasts were cultivated in the bioreactor, and thevalues of pH and dissolved oxygen levels in the flowing culture medium were measuredcontinuously for up to 3 days. Our integrated microfluidic system providesa new analytical platform with ease of fabrication and operation, which can beadapted for applications in various microfluidic cell culture and organ-on-chipdevices.
|
|
| 8. |
|
|
| 9. |
- Wang, Yu, et al.
(författare)
-
Biomaterial-Based “Structured Opals” with Programmable Combination of Diffractive Optical Elements and Photonic Bandgap Effects
- 2019
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 31:5
-
Tidskriftsartikel (refereegranskat)abstract
- Naturally occurring iridescent systems produce brilliant color displays through multiscale, hierarchical assembly of structures that combine reflective, diffractive, diffusive, or absorbing domains. The fabrication of biopolymer-based, hierarchical 3D photonic crystals through the use of a topographical templating strategy that allows combined optical effects derived from the interplay of predesigned 2D and 3D geometries is reported here. This biomaterials-based approach generates 2D diffractive optics composed of 3D nanophotonic lattices that allow simultaneous control over the reflection (through the 3D photonic bandgap) and the transmission (through 2D diffractive structuring) of light with the additional utility of being constituted by a biocompatible, implantable, edible commodity textile material. The use of biopolymers allows additional degrees of freedom in photonic bandgap design through directed protein conformation modulation. Demonstrator structures are presented to illustrate the lattice multifunctionality, including tunable diffractive properties, increased angle of view of photonic crystals, color-mixing, and sensing applications.
|
|
| 10. |
- Zhang, Y. S., et al.
(författare)
-
Multisensor-integrated organs-on-chips platform for automated and continual in situ monitoring of organoid behaviors
- 2017
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 114:12, s. E2293-E2302
-
Tidskriftsartikel (refereegranskat)abstract
- Organ-on-a-chip systems areminiaturizedmicrofluidic 3D human tissue and organ models designed to recapitulate the important biological and physiological parameters of their in vivo counterparts. They have recently emerged as a viable platform for personalized medicine and drug screening. These in vitro models, featuring biomimetic compositions, architectures, and functions, are expected to replace the conventional planar, static cell cultures and bridge the gap between the currently used preclinical animal models and the human body. Multiple organoid models may be further connected together through the microfluidics in a similar manner in which they are arranged in vivo, providing the capability to analyze multiorgan interactions. Although a wide variety of human organ-on-a-chip models have been created, there are limited efforts on the integration of multisensor systems. However, in situ continual measuring is critical in precise assessment of the microenvironment parameters and the dynamic responses of the organs to pharmaceutical compounds over extended periods of time. In addition, automated and noninvasive capability is strongly desired for long-term monitoring. Here, we report a fully integrated modular physical, biochemical, and optical sensing platform through a fluidics-routing breadboard, which operates organ-on-a-chip units in a continual, dynamic, and automated manner.We believe that this platform technology has paved a potential avenue to promote the performance of current organ-on-a-chip models in drug screening by integrating a multitude of real-time sensors to achieve automated in situ monitoring of biophysical and biochemical parameters.
|
|
