1. |
|
|
2. |
- Brischke, Christian, et al.
(författare)
-
Natural durability of timber exposed above ground – a survey
- 2013
-
Ingår i: Drvna industrija. - : Faculty of Forestry, University of Zagreb. - 0012-6772 .- 1847-1153. ; 64:2, s. 113-129
-
Tidskriftsartikel (refereegranskat)abstract
- Besides its inherent resistance against degrading organisms, the durability of timber is infl uenced by design details and climatic conditions, making it difficult to treat wood durability as an absolute value. Durability classification is, therefore, based on comparing performance indicators between the timber in question and a reference timber. These relative values are grouped and related to durability classes, which can refer to a high range of service-lives. The insufficient comparability of such durability records has turned out to be a key challenge for service-life prediction. This paper reviewed literature data, based on service-life measures, not masked by a durability classification. It focused on natural durability of timber tested in the field above-ground. Additionally, results from ongoing aboveground durability studies in Europe and Australia are presented and have been used for further analysis. In total, 163 durability recordings from 31 different test sites worldwide based on ten different test methods have been considered for calculation of resistance factors. The datasets were heterogeneous in quality and quantity; the resulting resistance factors suffered from high variation. In conclusion, an open platform for scientific exchange is needed to increase the amount of available service-life related data.
|
|
3. |
- Meyer-Veltrup, Linda, et al.
(författare)
-
The combined effect of wetting ability and durability on outdoor performance of wood : development and verification of a new prediction approach
- 2017
-
Ingår i: Wood Science and Technology. - : Springer Verlag. - 0043-7719 .- 1432-5225. ; 51:3, s. 615-637
-
Tidskriftsartikel (refereegranskat)abstract
- Comprehensive approaches to predict performance of wood products are requested by international standards, and the first attempts have been made in the frame of European research projects. However, there is still an imminent need for a methodology to implement the durability and moisture performance of wood in an engineering design method and performance classification system. The aim of this study was therefore to establish an approach to predict service life of wood above ground taking into account the combined effect of wetting ability and durability data. A comprehensive data set was obtained from laboratory durability tests and still ongoing field trials in Norway, Germany and Sweden. In addition, four different wetting ability tests were performed with the same material. Based on a dose–response concept, decay rates for specimens exposed above ground were predicted implementing various indicating factors. A model was developed and optimised taking into account the resistance of wood against soft, white and brown rot as well as relevant types of water uptake and release. Decay rates from above-ground field tests at different test sites in Norway were predicted with the model. In a second step, the model was validated using data from laboratory and field tests performed in Germany and Sweden. The model was found to be fairly reliable, and it has the advantage to get implemented into existing engineering design guidelines. The approach at hand might furthermore be used for implementing wetting ability data into performance classification as requested by European standardisation bodies.
|
|
4. |
|
|