| 1. |
- Fladvad, Marit, et al.
(författare)
-
Modelling the response of large-size subbase materials tested under varying moisture conditions in a heavy vehicle simulator
- 2022
-
Ingår i: International Journal on Road Materials and Pavement Design. - : Taylor & Francis. - 1468-0629 .- 2164-7402. ; 23:5, s. 1107-1128
-
Tidskriftsartikel (refereegranskat)abstract
- Pavement design methods must be able to predict the behaviour of pavement materials at increased moisture levels due to climate changes causing increased precipitation and more intense rainfall events. This paper intends to examine the influence of moisture and gradation on pavement response. An instrumented accelerated pavement test (APT) has been conducted on two thin flexible pavement structures with unbound base course and subbase materials using a heavy vehicle simulator (HVS). The two pavement structures were identical except for the gradation of the subbase material, where one had a 0/90 mm curve with a controlled fines content, and the other had an open-graded 22/90 mm curve. The APT was conducted using constant dual-wheel loading, and three different groundwater (GW) levels were induced in order to change the moisture content in the structures. The HVS was stopped regularly for carrying out response measurements from the instrumentation. The analysis is focussed on the response of the unbound aggregate layers to varying moisture levels in the pavement structure. The increased GW level causes a substantial increase in rutting. Conflicting results are found regarding the development of stresses and strains throughout the APT. Two models, linear elastic and non-linear elastic, is employed to model the responses from the pavement structures.
|
|
| 2. |
- Fladvad, Marit, et al.
(författare)
-
Performance of unbound pavement materials in changing moisture conditions
- 2020
-
Ingår i: Lecture Notes in Civil Engineering. - Cham : Springer. - 9783030552350 ; , s. 70-79
-
Konferensbidrag (refereegranskat)abstract
- Expected climate changes will in many areas represent a shift towards increased precipitation and more intense rainfall events. This may lead to increased moisture within road structures and possible overloading of road drainage systems. Pavement design methods must therefore be able to predict the behaviour of pavement materials at increased moisture levels. An instrumented accelerated pavement test (APT) has been conducted on two thin flexible pavement structures with coarse-grained unbound base course and subbase materials using a heavy vehicle simulator (HVS). The two pavement structures were identical except for the grain size distribution of the subbase material, where one had a dense 0/90 mm curve with a controlled fines content, and the other had an open-graded 22/90 mm curve. The APT was conducted using constant dual wheel loading, and three different groundwater levels were induced in order to change the moisture content in the structures. The HVS was stopped regularly for carrying out response measurements from the instrumentation. The analysis is focussed on the response and the performance of the unbound aggregate layers to varying moisture levels in the pavement structure.
|
|
| 3. |
- Fladvad, Marit, et al.
(författare)
-
Permanent deformation modelling of large-size unbound pavement materials tested in a heavy vehicle simulator under different moisture conditions
- 2022
-
Ingår i: International Journal on Road Materials and Pavement Design. - : Taylor and Francis Ltd.. - 1468-0629 .- 2164-7402. ; 23:5, s. 1157-1180
-
Tidskriftsartikel (refereegranskat)abstract
- Climate changes alter the environmental conditions which pavement design is based on, invalidating empirical design methods. Transition to mechanistic design requires the ability to model the behaviour of pavement materials under relevant environmental conditions. An accelerated pavement test (APT) is designed to test two instrumented pavement structures under moisture conditions which are altered by raising the groundwater table (GWT). Open-graded and well-graded subbase materials are used to investigate the effect of gradation on moisture dependency. Pavement response behaviour is modelled using a non-linear elastic (NLE) approach. Accumulation of permanent deformation under different moisture conditions is calculated by two models and compared to measured surface rutting. Moisture transport through the structures differs due to the subbase gradation. Increased GWT accelerates the accumulation of permanent deformations in both structures, identified by both models. One model provides a significantly better fit to the subgrade deformations and the width of the rutting profile.
|
|
