| 1. |
- Galluzzi, L, et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring cell death in higher eukaryotes.
- 2009
-
Ingår i: Cell death and differentiation. - : Springer Science and Business Media LLC. - 1476-5403 .- 1350-9047. ; 16:8, s. 1093-107
-
Forskningsöversikt (refereegranskat)abstract
- Cell death is essential for a plethora of physiological processes, and its deregulation characterizes numerous human diseases. Thus, the in-depth investigation of cell death and its mechanisms constitutes a formidable challenge for fundamental and applied biomedical research, and has tremendous implications for the development of novel therapeutic strategies. It is, therefore, of utmost importance to standardize the experimental procedures that identify dying and dead cells in cell cultures and/or in tissues, from model organisms and/or humans, in healthy and/or pathological scenarios. Thus far, dozens of methods have been proposed to quantify cell death-related parameters. However, no guidelines exist regarding their use and interpretation, and nobody has thoroughly annotated the experimental settings for which each of these techniques is most appropriate. Here, we provide a nonexhaustive comparison of methods to detect cell death with apoptotic or nonapoptotic morphologies, their advantages and pitfalls. These guidelines are intended for investigators who study cell death, as well as for reviewers who need to constructively critique scientific reports that deal with cellular demise. Given the difficulties in determining the exact number of cells that have passed the point-of-no-return of the signaling cascades leading to cell death, we emphasize the importance of performing multiple, methodologically unrelated assays to quantify dying and dead cells.
|
|
| 2. |
|
|
| 3. |
- Wegmann, F., et al.
(författare)
-
Polyethyleneimine is a potent mucosal adjuvant for viral glycoprotein antigens
- 2012
-
Ingår i: Nature Biotechnology. - : Springer Science and Business Media LLC. - 1087-0156 .- 1546-1696. ; 30:9
-
Tidskriftsartikel (refereegranskat)abstract
- Protection against mucosally transmitted infections probably requires immunity at the site of pathogen entry(1), yet there are no mucosal adjuvant formulations licensed for human use. Polyethyleneimine (PEI) represents a family of organic polycations used as nucleic acid transfection reagents in vitro and DNA vaccine delivery vehicles in vivo(2,3). Here we show that diverse PEI forms have potent mucosal adjuvant activity for viral subunit glycoprotein antigens. A single intranasal administration of influenza hemagglutinin or herpes simplex virus type-2 (HSV-2) glycoprotein D with PEI elicited robust antibody-mediated protection from an otherwise lethal infection, and was superior to existing experimental mucosal adjuvants. PEI formed nanoscale complexes with antigen, which were taken up by antigen-presenting cells in vitro and in vivo, promoted dendritic cell trafficking to draining lymph nodes and induced non-proinflammatory cytokine responses. PEI adjuvanticity required release of host double-stranded DNA that triggered Irf3-dependent signaling. PEI therefore merits further investigation as a mucosal adjuvant for human use.
|
|
| 4. |
|
|
| 5. |
- Clark, Pip C.J., et al.
(författare)
-
The passivating effect of cadmium in PbS/CdS colloidal quantum dots probed by nm-scale depth profiling
- 2017
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; 9:18, s. 6056-6067
-
Tidskriftsartikel (refereegranskat)abstract
- Achieving control of the surface chemistry of colloidal quantum dots (CQDs) is essential to fully exploit their properties in solar cells, but direct measurement of the chemistry and electronic structure in the outermost atomic layers is challenging. Here we probe the surface oxidation and passivation of cation-exchanged PbS/CdS core/shell CQDs with sub nm-scale precision using synchrotron-radiation-excited depth-profiling photoemission. We investigate the surface composition of the topmost 1-2.5 nm of the CQDs as a function of depth, for CQDs of varying CdS shell thickness, and examine how the surface changes after prolonged air exposure. We demonstrate that the Cd is localized at the surface of the CQDs. The surface-localized products of oxidation are identified, and the extent of oxidation quantified. We show that oxidised sulfur species are progressively eliminated as Cd replaces Pb at the surface. A sub-monolayer surface 'decoration' of Cd is found to be effective in passivating the CQDs. We show that the measured energy-level alignments at PbS/CdS colloidal quantum dot surfaces differ from those expected on the basis of bulk band offsets, and are strongly affected by the oxidation products. We develop a model for the passivating action of Cd. The optimum shell thickness (of around 0.1 nm, previously found to give maximised power conversion efficiency in PbS/CdS solar cells) is found to correspond to a trade-off between the rate of oxidation and the introduction of a surface barrier to charge transport.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Burkitt-Gray, Mary, et al.
(författare)
-
Structural investigations into colour-tuneable fluorescent InZnP-based quantum dots from zinc carboxylate and aminophosphine precursors
- 2022
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; 15:4, s. 1763-1774
-
Tidskriftsartikel (refereegranskat)abstract
- Fluorescent InP-based quantum dots have emerged as valuable nanomaterials for display technologies, biological imaging, and optoelectronic applications. The inclusion of zinc can enhance both their emissive and structural properties and reduce interfacial defects with ZnS or CdS shells. However, the sub-particle distribution of zinc and the role this element plays often remains unclear, and it has previously proved challenging to synthesise Zn-alloyed InP-based nanoparticles using aminophosphine precursors. In this report, we describe the synthesis of alloyed InZnP using zinc carboxylates, achieving colour-tuneable fluorescence from the unshelled core materials, followed by a one-pot ZnS or CdS deposition using diethyldithiocarbamate precursors. Structural analysis revealed that the “core/shell” particles synthesised here were more accurately described as homogeneous extended alloys with the constituent shell elements diffusing through the entire core, including full-depth inclusion of zinc.
|
|
| 9. |
- Carrasco-Jaim, Omar A., et al.
(författare)
-
Photocatalytic hydrogen production by biomimetic indium sulfide using Mimosa pudica leaves as template
- 2019
-
Ingår i: International Journal of Hydrogen Energy. - : Elsevier BV. - 0360-3199. ; 44:5, s. 2770-2783
-
Tidskriftsartikel (refereegranskat)abstract
- Biomimetic sulfur-deficient indium sulfide (In2.77S4) was synthesized by a template-assisted hydrothermal method using leaves of Mimosa pudica as a template for the first time. The effect of this template in modifying the morphology of the semiconductor particles was determined by physicochemical characterization, revealing an increase in surface area, decrease in microsphere size and pore size and an increase in pore volume density in samples synthesized with the template. X-ray photoelectron spectroscopy (XPS) analysis showed the presence of organic sulfur (S–O/S–C/S–H) and sulfur oxide species (–SO2, SO3 2−, SO4 2−) at the surface of the indium sulfide in samples synthesized with the template. Biomimetic indium sulfide also showed significant amounts of Fe introduced as a contaminant present on the Mimosa pudica leaves. The presence of these sulfur and iron species favors the photocatalytic activity for hydrogen production by their acting as a sacrificial reagent and promoting water oxidation on the surface of the templated particles, respectively. The photocatalytic hydrogen production rates over optimally-prepared biomimetic indium sulfide and indium sulfide synthesized without the organic template were 73 and 22 μmol g−1, respectively, indicating an improvement by a factor of three in the templated sample.
|
|
| 10. |
- Fairclough, Simon M., et al.
(författare)
-
Growth and Characterization of Strained and Alloyed Type-II ZnTe/ZnSe Core-Shell Nanocrystals
- 2012
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 116:51, s. 26898-26907
-
Tidskriftsartikel (refereegranskat)abstract
- We investigate the growth and the physical and optical properties of type-II heterostructured ZnTe/ZnSe colloidal nanocrystals, focusing on the role of the 7% lattice mismatch between the two materials in determining growth homogeneity and band structure. We find that the lattice mismatch between the two materials places limitations on the range of structures that can be grown, and for those in which coherent growth is achieved we present clear evidence that the low bulk modulus ZnTe cores are compressed by the higher modulus ZnSe shells, accentuating the red-shift of the excitonic state with increasing shell thickness. By employing a variety of characterization tools we build a clear picture of the core-shell architecture. We show how strain is manifested in structures with sharp core-shell interfaces and how intentional alloying of the interface can influence the growth and exciton energies. We show that a (2,6)-band effective mass model is able to distinguish between the as-grown "sharp" and "alloyed" interfaces, indicating that the alloyed structures incorporate reduced strain.
|
|
