| 1. |
- Borro, Bruno C., et al.
(författare)
-
Microfluidics-based self-assembly of peptide-loaded microgels : Effect of three dimensional (3D) printed micromixer design
- 2019
-
Ingår i: Journal of Colloid and Interface Science. - : ACADEMIC PRESS INC ELSEVIER SCIENCE. - 0021-9797 .- 1095-7103. ; 538, s. 559-568
-
Tidskriftsartikel (refereegranskat)abstract
- In an effort to contribute to research in scalable production systems for polymeric delivery systems loaded with antimicrobial peptides (AMPS), we here investigate effects of hydrodynamic flow conditions on microfluidic particle generation. For this purpose, rapid prototyping using 3D printing was applied to prepare micromixers with three different geometric designs, which were used to prepare Ca2+-crosslinked alginate microgels loaded with the AMP polymyxin B in a continuous process. Based on fluid dynamic simulations, the hydrodynamic flow patterns in the micromixers were designed to be either (i) turbulent with chaotic disruption, (ii) laminar with convective mixing, or (iii) convective with microvortex formation. The physicochemical properties of the microgels prepared with these micromixers were characterized by photon correlation spectroscopy, laser-Doppler micro-electrophoresis, smallangle x-ray scattering, and ellipsometry. The particle size and compactness were found to depend on the micromixer geometry: From such studies, particle size and compactness were found to depend on micromixer geometry, the smallest and most compact particles were obtained by preparation involving microvortex flows, while larger and more diffuse microgels were formed upon laminar mixing. Polymyxin B was found to be localized in the particle interior and to cause particle growth with increasing peptide loading. Ca2+-induced cross-linking of alginate, in turn, results in particle contraction. The peptide encapsulation efficiency was found to be higher than 80% for all investigated micromixer designs; the highest encapsulation efficiency observed for the smallest particles generated by microvortexmediated self-assembly. Ellipsometry results for surface-immobilized microgels, as well as results on peptide encapsulation, demonstrated electrolyte-induced peptide release. Taken together, these findings demonstrate that rapid prototyping of microfluidics using 3D-printed micromixers offers promises for continuous manufacturing of AMP-loaded microgels. Although the micromixer combining turbulent flow and microvortexes was demonstrated to be the most efficient, all three micromixer designs were found to mediate self-assembly of small microgels displaying efficient peptide encapsulation. This demonstrates the robustness of employing 3D-printed micromixers for microfluidic assembly of AMP-loaded microgels during continuous production.
|
|
| 2. |
- Jing, Xiaona, et al.
(författare)
-
Delivery of siRNA Complexed with Palmitoylated alpha-Peptide/beta-Peptoid Cell-Penetrating Peptidomimetics : Membrane Interaction and Structural Characterization of a Lipid-Based Nanocarrier System
- 2016
-
Ingår i: Molecular Pharmaceutics. - : American Chemical Society (ACS). - 1543-8384 .- 1543-8392. ; 13:6, s. 1739-1749
-
Tidskriftsartikel (refereegranskat)abstract
- Proteolytically stable alpha-peptide/beta-peptoid peptidomimetics constitute promising cell-penetrating carrier candidates exhibiting superior cellular uptake as compared to commonly used cell-penetrating peptides (CPPs). The aim of the present study was to explore the potential of these peptidomimetics for delivery of small interfering RNA (siRNA) to the cytosol by incorporation of a palmitoylated peptidomimetic construct into a cationic lipid-based nanocarrier system. The optimal construct was selected on the basis of the effect of palmitoylation and the influence of the length of the peptidomimetic on the interaction with model membranes and the cellular uptake. Palmitoylation enhanced the peptidomimetic adsorption to supported lipid bilayers as studied by ellipsometry. However, both palmitoylation and increased peptidomimetic chain length were found to be beneficial in the cellular uptake studies using fluorophore-labeled analogues. Thus, the longer palmitoylated peptidomimetic was chosen for further formulation of siRNA in a dioleoylphosphatidylethanolamine/cholesteryl hemisuccinate (DOPE/CHEMS) nanocarrier system, and the resulting nanoparticles were found to mediate efficient gene silencing in vitro. Cryo-transmission electron microscopy (cryo-TEM) revealed multilamellar, onion-like spherical vesicles, and small-angle X-ray scattering (SAXS) analysis confirmed that the majority of the lipids in the nanocarriers were organized in lamellar structures, yet coexisted with a hexagonal phase, which is important for efficient nanocarrier-mediated endosomal escape of siRNA ensuring cytosolic delivery. The present work is a proof-of-concept for the use of alpha-peptides/beta-peptoid peptidomimetics in an efficient delivery system that may be more generally exploited for the intracellular delivery of biomacromolecular drugs.
|
|
| 3. |
- Jing, Xiaona, et al.
(författare)
-
Interaction of Peptidomimetics with Bilayer Membranes : Biophysical Characterization and Cellular Uptake
- 2012
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 28:11, s. 5167-5175
-
Tidskriftsartikel (refereegranskat)abstract
- Enzymatically stable cell-penetrating alpha-peptide/beta-peptoid peptidomimetics constitute promising drug delivery vehicles for the transport of therapeutic biomacromolecules across membrane barriers. The aim of the present study was to elucidate the mechanism of peptidomimetic-lipid bilayer interactions. A series of peptidomimetics consisting of alternating cationic and hydrophobic residues displaying variation in length and N-terminal end group were applied to fluid-phase, anionic lipid bilayers, and their interaction was investigated using isothermal titration calorimetry (ITC) and ellipsometry. Titration of lipid vesicles into solutions of peptidomimetics resulted in exothermic adsorption processes, and the interaction of all studied peptidomimetics with anionic lipid membranes was found to be enthalpy-driven. The enthalpy and Gibbs free energy (Delta G) proved more favorable with increasing chain length. However, not all charges contribute equally to the interaction, as evidenced by the charge-normalized Delta G being inversely correlated to the sequence length. Ellipsometry data suggested that the hydrophobic residues also played an important role in the interaction process. Furthermore, Delta G extracted from ellipsometry data showed good agreement with that obtained with ITC. To further elucidate their interaction with biological membranes, quantitative uptake and cellular distribution were studied in proliferating HeLa cells by flow cytometry and confocal microscopy. The cellular uptake of carboxyfluorescein-labeled peptidomimetics showed a similar ranking as that obtained from the adsorbed amount, and binding energy to model membranes demonstrated that the initial interaction with the membrane is of key importance for the cellular uptake.
|
|
| 4. |
- Jing, Xiaona, et al.
(författare)
-
Membrane adsorption and binding, cellular uptake and cytotoxicity of cell-penetrating peptidomimetics with alpha-peptide/beta-peptoid backbone : Effects of hydrogen bonding and alpha-chirality in the beta-peptoid residues
- 2012
-
Ingår i: Biochimica et Biophysica Acta - Biomembranes. - : Elsevier BV. - 0005-2736 .- 1879-2642. ; 1818:11, s. 2660-2668
-
Tidskriftsartikel (refereegranskat)abstract
- Cell-penetrating peptides (CPPs) provide a promising approach for enhancing intracellular delivery of therapeutic biomacromolecules by increasing transport through membrane barriers. Here, proteolytically stable cell-penetrating peptidomimetics with alpha-peptide/beta-peptoid backbone were studied to evaluate the effect of alpha-chirality in the beta-peptoid residues and the presence of guanidinium groups in the alpha-amino acid residues on membrane interaction. The molecular properties of the peptidomimetics in solution (surface and intramolecular hydrogen bonding, aqueous diffusion rate and molecular size) were studied along with their adsorption to lipid bilayers, cellular uptake, and toxicity. The surface hydrogen bonding ability of the peptidomimetics reflected their adsorbed amounts onto lipid bilayers as well as with their cellular uptake, indicating the importance of hydrogen bonding for their membrane interaction and cellular uptake. Ellipsometry studies further demonstrated that the presence of chiral centers in the beta-peptoid residues promotes a higher adsorption to anionic lipid bilayers, whereas circular dichroism results showed that alpha-chirality influences their overall mean residue ellipticity. The presence of guanidinium groups and alpha-chiral beta-peptoid residues was also found to have a significant positive effect on uptake in living cells. Together, the findings provide an improved understanding on the behavior of cell-penetrating peptidomimetics in the presence of lipid bilayers and live cells.
|
|
| 5. |
- Ongun, Melike, et al.
(författare)
-
Lipid nanoparticles for local delivery of mRNA to the respiratory tract : Effect of PEG-lipid content and administration route
- 2024
-
Ingår i: European Journal of Pharmaceutics and Biopharmaceutics. - 0939-6411. ; 198
-
Tidskriftsartikel (refereegranskat)abstract
- Design of inhalable mRNA therapeutics is promising because local administration in the respiratory tract is minimally invasive and induces a local response. However, several challenges related to administration via inhalation and respiratory tract barriers have so far prevented the progress of inhaled mRNA therapeutics. Here, we investigated factors of importance for lipid nanoparticle (LNP)-mediated delivery of mRNA to the respiratory tract. We hypothesized that: (i) the PEG-lipid content is important for providing colloidal stability during aerosolization and for mucosal delivery, (ii) the PEG-lipid content influences the expression of mRNA-encoded protein in the lungs, and (iii) the route of administration (nasal versus pulmonary) affects mRNA delivery in the lungs. In this study, we aimed to optimize the PEG-lipid content for mucosal delivery and to investigate the effect of administration route on the kinetics of protein expression. Our results show that increasing the PEG-lipid content improves the colloidal stability during the aerosolization process, but has a negative impact on the transfection efficiency in vitro. The kinetics of protein expression in vivo is dependent on the route of administration, and we found that pulmonary administration of mRNA-LNPs to mice results in more durable protein expression than nasal administration. These results demonstrate that the design of the delivery system and the route of administration are important for achieving high mRNA transfection efficiency in the respiratory tract.
|
|
| 6. |
- Rodrigues, Letícia, et al.
(författare)
-
Immune responses induced by nano-self-assembled lipid adjuvants based on a monomycoloyl glycerol analogue after vaccination with the Chlamydia trachomatis major outer membrane protein.
- 2018
-
Ingår i: Journal of Controlled Release. - : Elsevier BV. - 0168-3659 .- 1873-4995. ; 285, s. 12-22
-
Tidskriftsartikel (refereegranskat)abstract
- Nanocarriers based on inverse hexagonal liquid crystalline phases (hexosomes) show promising potential as vaccine delivery systems. Their unique internal structure, composed of both lipophilic domains and water-containing channels, renders them capable of accommodating immunopotentiating compounds and antigens. However, their adjuvant properties are poorly understood. We hypothesized that the supramolecular structure of the lyotropic liquid crystalline phase influences the immunostimulatory activity of lipid-based nanocarriers. To test this, hexosomes were designed containing the lipid phytantriol (Phy) and the immunopotentiator monomycoloyl glycerol-1 (MMG-1). Self-assembly of Phy and MMG-1 into nanocarriers featuring an internal hexagonal phase was confirmed by small-angle X-ray scattering and cryogenic transmission electron microscopy. The effect of the nanostructure on the adjuvant activity was studied by comparing the immunogenicity of Phy/MMG-1 hexosomes with MMG-1-containing lamellar liquid crystalline nanoparticles (liposomes, CAF04). The quality and magnitude of the elicited immune responses were determined after vaccination of CB6/F1 mice using the Chlamydia trachomatis major outer membrane protein (MOMP) as antigen. MMG-1-based hexosomes potentiated significantly stronger MOMP-specific humoral responses than CAF04 liposomes. The liposome-based vaccine formulation induced a much stronger MOMP-specific cell-mediated immune response compared to hexosome-adjuvanted MOMP, which elicited minimal MOMP-specific T-cell stimulation after vaccination. Hence, our data demonstrates that hexosomal and liposomal adjuvants activate the immune system via different mechanisms. Our work provides valuable insights into the adjuvant potential of hexosomes and emphasizes that engineering of the supramolecular structure can be used to design adjuvants with customized immunological properties.
|
|
| 7. |
- Wan, Feng, et al.
(författare)
-
Lipid Shell-Enveloped Polymeric Nanoparticles with High Integrity of Lipid Shells Improve Mucus Penetration and Interaction with Cystic Fibrosis-Related Bacterial Biofilms
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 10:13, s. 10678-10687
-
Tidskriftsartikel (refereegranskat)abstract
- Nanoparticle (NP) mediated drug delivery into viscous biomatrices, e.g., mucus and bacterial biofilms, is challenging. Lipid shell-enveloped polymeric NPs (Lipid@NPs), composed of a polymeric NP core coated with a lipid shell, represent a promising alternative to the current delivery systems. Here, we describe the facile methods to prepare Lipid@NPs with high integrity of lipid shells and demonstrate the potential of Lipid@NPs in an effective mucus penetration and interaction with cystic fibrosis-related bacterial biofilms. Lipid shell-enveloped polystyrene NPs with high integrity of lipid shells (cLipid@PSNPs) were prepared by using an electrostatically mediated layer-by-layer approach, where the model polystyrene NPs (PSNPs) were first modified with positively charged poly-l-lysine (PLL) and 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP), followed by subsequent fusion with zwitterionic, PEGylated small unilamellar vesicles (SUVs). The interaction of the PSNPs with SUVs was significantly enhanced by modifying the PSNPs with PLL and DOTAP, which eventually resulted in the formation of cLipid@PSNPs, i.e., Lipid@PLL-PSNPs and Lipid@DOTAP-PSNPs. Improved mucus-penetrating property of cLipid@PSNPs was demonstrated by quartz crystal microbalance with dissipation monitoring measurements. Furthermore, fluorescence resonance energy transfer measurements showed that the interaction of the cLipid@PSNPs with bacterial biofilms was significantly promoted. In conclusion, we prepared cLipid@PSNPs via an electrostatically mediated layer-by-layer approach. Our results suggest that the integrity of the lipid envelopes is crucial for enabling the diffusion of Lipid@PSNPs into the mucus layer and promoting the interaction of Lipid@PSNPs with a bacterial biofilm.
|
|
| 8. |
- Wan, Feng, et al.
(författare)
-
Qualitative and quantitative analysis of the biophysical interaction of inhaled nanoparticles with pulmonary surfactant by using quartz crystal microbalance with dissipation monitoring
- 2019
-
Ingår i: Journal of Colloid and Interface Science. - : Elsevier BV. - 0021-9797. ; 545, s. 162-171
-
Tidskriftsartikel (refereegranskat)abstract
- Understanding the interaction between inhaled nanoparticles and pulmonary surfactant is a prerequisite for predicting the fate of inhaled nanoparticles. Here, we introduce a quartz crystal microbalance with dissipation monitoring (QCM-D)-based methodology to reveal the extent and nature of the biophysical interactions of polymer- and lipid-based nanoparticles with pulmonary surfactant. By fitting the QCM-D data to the Langmuir adsorption equation, we determined the kinetics and equilibrium parameters [i.e., maximal adsorption (Δm max ), equilibrium constant (K a ), adsorption rate constant (k a ) and desorption rate constant (k d )] of polymeric nanoparticles adsorption onto the pulmonary surfactant (e.g., an artificial lipid mixture and an extract of porcine lung surfactant). Furthermore, our results revealed that the nature of the interactions between lipid-based nanoparticles (e.g., liposomes) and pulmonary surfactant was governed by the liposomal composition, i.e., incorporation of cholesterol and PEGylated phospholipid (DSPE-PEG 2000 ) into DOPC-based liposomes led to the adsorption of intact liposomes onto the pulmonary surfactant layer and the mass exchange between the liposomes and pulmonary surfactant layer, respectively. In conclusion, we demonstrate the applicability of the QCM-D technique for qualitative and quantitative analysis of the biophysical interaction of inhaled nanoparticles with pulmonary surfactant, which is vital for rational design and optimization of inhalable nanomedicines.
|
|
| 9. |
- Xu, You, et al.
(författare)
-
Insights into the mechanisms of interaction between inhalable lipid-polymer hybrid nanoparticles and pulmonary surfactant
- 2023
-
Ingår i: Journal of Colloid and Interface Science. - : Elsevier BV. - 0021-9797. ; 633, s. 511-525
-
Tidskriftsartikel (refereegranskat)abstract
- Pulmonary delivery of small interfering RNA (siRNA) using nanoparticle-based delivery systems is promising for local treatment of respiratory diseases. We designed dry powder inhaler formulations of siRNA-loaded lipid-polymer hybrid nanoparticles (LPNs) with aerosolization properties optimized for inhalation therapy. Interactions between LPNs and pulmonary surfactant (PS) determine the fate of inhaled LPNs, but interaction mechanisms are unknown. Here we used surface-sensitive techniques to study how physicochemical properties and pathological microenvironments influence interactions between siRNA-loaded LPNs and supported PS layers. PS was deposited on SiO2 surfaces as single bilayer or multilayers and characterized using quartz crystal microbalance with dissipation monitoring and Fourier-transform infrared spectroscopy with attenuated total reflection. Immobilization of PS as multilayers, resembling the structural PS organization in the alveolar subphase, effectively reduced the relative importance of interactions between PS and the underlying surface. However, the binding affinity between PS and LPNs was identical in the two models. The physicochemical LPN properties influenced the translocation pathways and retention time of LPNs. Membrane fluidity and electrostatic interactions were decisive for the interaction strength between LPNs and PS. Experimental conditions reflecting pathological microenvironments promoted LPN deposition. Hence, these results shed new light on design criteria for LPN transport through the air–blood barrier.
|
|
