| 1. |
- Anna Karin, Hedström, et al.
(författare)
-
The impact of bariatric surgery on disease activity and progression of multiple sclerosis : A nationwide matched cohort study
- 2022
-
Ingår i: Multiple Sclerosis Journal. - : Sage Publications. - 1352-4585 .- 1477-0970. ; 28:13, s. 2099-2105
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Surgical outcomes in patients with multiple sclerosis (MS) following metabolic surgery appear to be similar compared to those of the general bariatric population.OBJECTIVE: To study the impact of metabolic surgery on the clinical course of MS.METHODS: Using data from the Scandinavian Obesity Surgery Registry and the Swedish Multiple Sclerosis register, we compared disease outcomes in 122 cases of MS who had undergone metabolic surgery with those of 122 cases of MS without surgery, matched by a two-staged Propensity score match, including age at disease onset, sex, MS phenotype, body mass index, and preoperative severity of MS as measured by the Expanded Disability Status Scale.RESULTS: The time to 6-month confirmed disability progression during the first five years postbaseline was shorter among the surgical patients (hazard ratio (HR) = 2.31, 95% confidence interval (CI) = 1.09-4.90; p = 0.03). No differences were observed regarding postoperative annual relapse rate (p = 0.24) or time to first postoperative relapse (p = 0.52).CONCLUSION: Although metabolic surgery appears to be a safe and efficient treatment of obesity in patients with MS, the clinical course of the disease might be negatively affected. Long-term nutritional follow-up after surgery and supplementation maintenance are crucial, particularly among those with preoperative deficits.
|
|
| 2. |
- Lundskog, Anders
(författare)
-
Controlled growth of hexagonal GaN pyramids and InGaN QDs
- 2012
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Gallium-nitride (GaN) and its related alloys are direct band gap semiconductors, with a wide variety of applications. The white light emitting diode (LED) is of particular importance as it is expected to replace energy inefficient light bulb and hazardous incandescent lamps used today. However, today’s planar hetero epitaxial grown LEDs structures contain an unavoidable number of dislocations, which serves as non-radiative recombination centers. The dislocations harm the luminous efficiency of the LEDs and generate additional heat. Pseudomorphically grown quantum dots (QDs) are expected to be dislocation free thus the injected carriers captured by the QDs essentially recombine radiatively since the dislocations remain outside the QD. Furthermore the continuous character of the density of states in bulk materials is redistributed when the size of the dot is reduced within the Bohr radius of the material. Fully discret energy levels are eventually reached, which offers additional control of the optical properties. The Coulomb interaction between the confined carriers also has influence on the emission energy of the recombining carriers, which opens up the possibility of manufacturing novel light sources such as the single photon emitter. Single photon emitters are essential building blocks for quantum cryptography and teleportation applications.The main contribution of the present work is the investigation of growth and characterization of sitecontrolled indium-gallium-nitride QDs embedded in GaN matrixes. The goal has been to demonstrate the ability to grow site-controlled InGaN QDs at the apex of hexagonal GaN pyramids in a controlled way using hot-wall metal organic chemical vapor deposition (MOCVD). Strong emphasis was set on the controlled growth of InGaN QDs. For example the growth of a single InGaN QD located at the apex of hexagonal GaN pyramids with tunable emission energy, the QD emission energy impact on the mask design, and a novel approach for the growth of InGaN QDs with polarization deterministic photon vectors were reported. The thesis is mainly based on experimental investigations by secondary electron microscope (SEM), micro photo-luminescence (μPL), and scanning transition electron microscopy ((S)TEM) characterization techniques.In Paper 1 and 2, we present the growth of symmetric GaN hexagonal pyramids which served as template for the InGaN QDs grown. In paper 1, it was concluded that the selective area growth (SAG) of hexagonal GaN pyramids by MOCVD through symmetric openings in a SIN mask roughly can be divided in two regimes where either the pyramid expands laterally or not. When the pyramid expanded laterally the resulting pyramid apex became (0001) truncated even after prolonged growth times. Lateral expansion also had major impact on the pyramid-to-pyramid uniformity. In paper 2, the MOCVD process parameter impact on the pyramid morphology was investigated. By tuning the growth temperature, the ammonia, and TMGa-flows a self limited pyramid structure with only {1101} facets visible was achieved. The presence of the {1101}, {1102}, and {1100} facets were discussed from surface stabilities under various growth conditions.Paper 3 and 4 concern the growth of InGaN QDs located at the apex of hexagonal GaN pyramids. In paper 3, we showed that it is possible to grow single QDs at the apex of hexagonal pyramids with emission line widths in the Ångström range. The QD emission energy was demonstrated to be tunable by the growth temperature. Basic spectroscopy data is also presented on a single QD in paper 3. In paper 4, the growth mechanisms of the QDs presented in paper 3 are presented. We concluded that (0001) truncated GaN pyramid base initiated the growth of InGaN QDs which gave rise to narrow luminescence peaks in the μPL spectra.In paper 5, the QD emission energy impact of the mask design was investigated. To our big surprise the QD emission energy increased with increasing pyramid pitch while the emission energy of the InGaN quantum wells located on the {1101} facets of the pyramids energetically shifted towards lower energies. The energy shift at the apex was found to be associated with the (0001) truncation diameter of the underlying GaN pyramid since no energy shift was observed for (0001) truncated pyramids with truncation diameters larger than 100 nm.In paper 6, the symmetry of the GaN pyramids were intentionally broken through the introduction of elongated openings in the SiN mask (symmetric openings was used in the previous five papers). The emission polarization vectors of the subsequently grown InGaN QDs were deterministically linked to the in-plane orientation of the pyramid it was nucleated upon, implying that the QDs inhibit an inplane anisotropy directly inherited from the pyramid template.Finally, paper 7 describes a hot-wall MOCVD reactor improvement by inserting insulating pyrolytic boron-nitride (PBN) stripes in the growth chamber. By doing this, we have completely eliminated the arcing problem between different susceptor parts. As a consequence, the reactor gained run-to-run reproducibility. Growth of state of the art advanced aluminum-gallium-nitride high electron mobility transistor structures on a 100 mm wafer with electron mobility above 2000 Vs/cm2 was demonstrated by the improved process.
|
|
| 3. |
- Moberg, Christina, et al.
(författare)
-
De unga gör helt rätt när de stämmer staten
- 2022
-
Ingår i: Aftonbladet. - 1103-9000.
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- 1 620 forskare och lärare i forskarvärlden: Vi ställer oss bakom Auroras klimatkrav
|
|
| 4. |
- Stenberg, Erik, 1979-, et al.
(författare)
-
Bariatric and metabolic surgery in patients with morbid obesity and multiple sclerosis : a nationwide, matched cohort study
- 2021
-
Ingår i: Surgery for Obesity and Related Diseases. - : Elsevier. - 1550-7289 .- 1878-7533. ; 17:6, s. 1108-1114
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Despite an association between obesity and multiple sclerosis (MS), very little is known regarding the safety and efficacy outcomes for patients with MS and severe obesity undergoing metabolic surgery.OBJECTIVES: The aim of the present study was to evaluate early complications and efficacy outcomes of metabolic surgery in patients with severe obesity and MS.SETTING: Nationwide, Sweden.METHODS: In this, matched cohort study, 196 patients with an MS diagnosis in the Swedish MS register who were undergoing metabolic surgery (gastric bypass or sleeve gastrectomy) with a registration in the Scandinavian Obesity Surgery Registry (SOReg) were matched 1:10 with a control group without MS diagnosis from the SOReg. A 2-stage matching procedure was used (exact match by surgical method, followed by propensity Score matching, including age, sex, preoperative BMI, surgical center, surgical access, year of surgery, hypertension, diabetes, sleep apnea, and dyslipidemia).RESULTS: Weight loss at 2 years after surgery was similar for patients with MS and controls (total weight loss 31.6 ± 9.1 versus 31.8 ± 9.2, P = .735). No significant differences were seen in either the overall postoperative complication rate (7.9% versus 7.2%, P = .778), or serious postoperative complications (3.7% versus 2.8%, P = .430). All aspects of health-related quality of life (HRQoL) improved in both groups but less so for the physical aspects of HRQoL in patients with MS.CONCLUSION: Metabolic surgery is a safe and efficient treatment for severe obesity in patients with MS, and it leads to subsequent improvements in HRQoL. Further studies addressing the effects of metabolic surgery on MS-related symptoms are needed.
|
|
| 5. |
- Stomrud, Erik, et al.
(författare)
-
CSF biomarkers correlate with cerebral blood flow on SPECT in healthy elderly.
- 2012
-
Ingår i: Dementia and geriatric cognitive disorders. - : S. Karger AG. - 1421-9824 .- 1420-8008. ; 33:2-3, s. 156-63
-
Tidskriftsartikel (refereegranskat)abstract
- The preclinical patterns of biological markers for Alzheimer's disease (AD) in vivo need further exploration. The aim of this study was therefore to investigate CSF biomarkers, regional cerebral blood flow (rCBF) and cognitive performance in cognitively healthy older individuals.
|
|
| 6. |
- Uhlén, Mathias, et al.
(författare)
-
A human protein atlas for normal and cancer tissues based on antibody proteomics
- 2005
-
Ingår i: Molecular & Cellular Proteomics. - 1535-9476 .- 1535-9484. ; 4:12, s. 1920-1932
-
Tidskriftsartikel (refereegranskat)abstract
- Antibody-based proteomics provides a powerful approach for the functional study of the human proteome involving the systematic generation of protein-specific affinity reagents. We used this strategy to construct a comprehensive, antibody-based protein atlas for expression and localization profiles in 48 normal human tissues and 20 different cancers. Here we report a new publicly available database containing, in the first version, similar to 400,000 high resolution images corresponding to more than 700 antibodies toward human proteins. Each image has been annotated by a certified pathologist to provide a knowledge base for functional studies and to allow queries about protein profiles in normal and disease tissues. Our results suggest it should be possible to extend this analysis to the majority of all human proteins thus providing a valuable tool for medical and biological research.
|
|
| 7. |
|
|
| 8. |
- Adiels, Emil, et al.
(författare)
-
The structural behaviour of masonry bridges designed ashydrostatic shells
- 2024
-
Konferensbidrag (refereegranskat)abstract
- Masonry bridges are among the most sustainable structures ever to have been built. The long service time, the resilience to carry larger loads than originally intended, and significantly lower life cycle cost compared to other bridge types suggest that we should consider the design and construction of new masonry bridges, even if their initial cost is greater than that of steel or concrete bridges The aim of this work is to understand the structural behaviour and study the collapse of a single-span masonry hydrostatic shell, that is a shell designed specifically to carry a hydrostatic load. Due to the complexity of the masonry shell interacting with fill, it is necessary to use a combination of computational methods and load tests on physical models in their structural assessment. We perform a load test to failure on a physical model spanning 770 mm made from 3D printed blocks and analyse the model using the Discrete Element Method (DEM) in Dassault Systemes Abaqus. ` The physical model behaved well and predicts that the bridge could be used at full scale. The preliminary results from a computational DEM model are found to be qualitatively good, but greatly overestimate the collapse load of the bridge.
|
|
| 9. |
- Andersson, Camilla, et al.
(författare)
-
Achievements and experiences from science–policy interaction in the field of air pollution : Synthesising 20 years of research and outreach,thinking about future needs
- 2021
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- For 20 years, the Swedish Environmental Protection Agency together with the MISTRA research foundation have funded five air pollution research programmes with focus on producing knowledge that supports policy and emission control in national and international arenas. The research has been multidisciplinary and has included research on emissions, atmospheric transport and transformation processes, human health effects, ecosystem effects, and emission control strategies. Research has also been conducted on the interaction between air pollution and climate change.Over these years, the link between the research programmes and the development of emission control strategies and policies in Sweden, the EU, and the UNECE Air Convention has been of high importance. This report presents how the research programmes have created societal benefits through support for the development of air pollution policies and emission control measures. The report also identifies future research needs to ensure continued progress towards even better air quality for future generations.
|
|
| 10. |
- Andersson, Henrik, et al.
(författare)
-
Evaluation of coatings applied to flexible substrates to enhance quality of ink jet printed silver nano-particle structures
- 2012
-
Ingår i: IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part C. - 1083-4400 .- 1558-1241. ; 2:2, s. 342-348
-
Tidskriftsartikel (refereegranskat)abstract
- Different types of the commercial surface treatment InkAid have been evaluated as a surface treatment to enhance print quality of silver nano-particle ink structures printed on polyimide and polyethene substrate. Originally these coatings have been specified to be applied on substrates for graphical ink jet printing. On the coated polyimide and polyethene substrates lines of different widths have been printed using a Dimatix materials printer together with silver nano-particle ink manufactured by Advanced Nano Products. The prints have then been evaluated in terms of print quality and resistivity before and after sintering. The results show that the application of these coatings can improve the print quality considerably, making it possible to print lines with a good definition, which is not otherwise possible with this type of ink on this substrate types. It has been found that the coating Semi Gloss provides the best results, both in terms of print quality as well as the lowest resistivity. The resistivity on polyethene is 3.5*10-7Ωm at best when sintered at 150°C and for polyimide 8.9*10-8Ωm sintered at 200°C. This corresponds to a conductivity of about 4.5% and 18%of bulk silver, respectively. It can be concluded that applying such PVP based coatings to polyethene and polyimide will increase the print quality quite substantially, making it possible to print patterns with requirements of smaller line widths and more details than what is possible without coating.
|
|
