| 1. |
- Frisk, U., et al.
(författare)
-
The Odin satellite - I. Radiometer design and test
- 2003
-
Ingår i: Astronomy and Astrophysics. - 0004-6361 .- 1432-0746. ; 402:3, s. L27-L34
-
Tidskriftsartikel (refereegranskat)abstract
- The Sub-millimetre and Millimetre Radiometer (SMR) is the main instrument on the Swedish, Canadian, Finnish and French spacecraft Odin. It consists of a 1.1 metre diameter telescope with four tuneable heterodyne receivers covering the ranges 486-504 GHz and 541-581 GHz, and one fixed at 118.75 GHz together with backends that provide spectral resolution from 150 kHz to 1 MHz. This Letter describes the Odin radiometer, its operation and performance with the data processing and calibration described in Paper II.
|
|
| 2. |
- Belitsky, Victor, 1955, et al.
(författare)
-
A new 3 mm band receiver for the Onsala 20 m antenna
- 2015
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 580
-
Tidskriftsartikel (refereegranskat)abstract
- A new receiver for the Onsala 20 m antenna with the possibility of being equipped with 3 mm and 4 mm bands has been built and the 3 mm channel has been commissioned during the Spring 2014. For single-dish operation, the receiver uses an innovative on-source/off-source optical switch. In combination with additional optical components and within the same optical layout, the switch provides two calibration loads (for the 3 mm and 4 mm channels), sideband rejection measurement, and tuning possibilities. The optical layout of the receiver employs all cold (4 K) offset elliptical mirrors for both channels, whereas the on-off switch employs flat mirrors only. The 3 mm channel employs a sideband separation (2SB) dual polarization receiver with orthomode transducer (OMT), 4-8 GHz intermediate frequency (IF), x? 2pol x? upper and lower sidebands (USB? +? LSB). The cryostat has four optical windows made of high density polyethylene (HDPE) with anti-reflection corrugations, two for the signal and two for each frequency band cold load. The cryostat uses a two-stage cryocooler produced by Sumitomo HI? RDK? 408D2 with anti-vibration suspension of the cold-head to minimize impact of the vibrations on the receiver stability. The local oscillator (LO) system is based on a Gunn oscillator with aphase lock loop (PLL) and four mechanical tuners for broadband operation, providing independently tunable LO power for each polarization. This paper provides a technical description of the receiver and its technology and could be useful for instrumentation engineers and observers using the Onsala 20 m telescope.
|
|
| 3. |
- Larsson, Bengt, et al.
(författare)
-
Molecular oxygen in the rho Ophiuchi cloud
- 2007
-
Ingår i: Astronomy & Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 466:3, s. 5-
-
Tidskriftsartikel (refereegranskat)abstract
- Context: Molecular oxygen, O2, has been expected historically to be an abundant component of the chemical species in molecular clouds and, as such, an important coolant of the dense interstellar medium. However, a number of attempts from both ground and from space have failed to detect O2 emission.Aims: The work described here uses heterodyne spectroscopy from space to search for molecular oxygen in the interstellar medium. Methods: The Odin satellite carries a 1.1 m sub-millimeter dish and a dedicated 119 GHz receiver for the ground state line of O2. Starting in 2002, the star forming molecular cloud core ρ Oph A was observed with Odin for 34 days during several observing runs.Results: We detect a spectral line at v_LSR =+3.5 km s-1 with Δ v_FWHM=1.5 km s-1, parameters which are also common to other species associated with ρ Oph A. This feature is identified as the O2 (NJ = 11 - 1_0) transition at 118 750.343 MHz.Conclusions: The abundance of molecular oxygen, relative to H{2} , is 5 × 10-8 averaged over the Odin beam. This abundance is consistently lower than previously reported upper limits.Based on observations with Odin, a Swedish-led satellite project funded jointly by the Swedish National Space Board (SNSB), the Canadian Space Agency (CSA), the National Technology Agency of Finland (Tekes) and Centre National d'Étude Spatiale (CNES). The Swedish Space Corporation has been the industrial prime contractor and also is operating the satellite. Appendix A is only available in electronic form at http://www.aanda.org
|
|
| 4. |
- Barkhof, J., et al.
(författare)
-
ALMA Band 2 Receiver Automated Test System
- 2022
-
Ingår i: 32nd International Symposium of Space Terahertz Technology, ISSTT 2022.
-
Konferensbidrag (refereegranskat)abstract
- As part of the ALMA Band 2 project, an automated test system was developed to fully qualify state-of-the-art Band 2 receivers, based on heritage of the Band 9 and Band 5 productions. The RF range of this receiver is 67 - 116 GHz, with a goal IF band of 4-18 GHz. Each receiver will undergo a thorough acceptance testing to verify its operation and performance prior to delivery. The core of the test system are a single-cartridge test cryostat, a dual-channel intermediate frequency signal processor, a vector near-field test system, and script-based measurement and control software that enables automated testing. We present details of the test system and measurement results of the first Band 2 receivers.
|
|
| 5. |
|
|
| 6. |
- Belitsky, Victor, 1955, et al.
(författare)
-
ALMA Band 2 Cold Cartridge Assembly Design
- 2022
-
Ingår i: 32nd International Symposium of Space Terahertz Technology, ISSTT 2022.
-
Konferensbidrag (refereegranskat)abstract
- As part of the ALMA development, we present the design of the ALMA Band 2 Cold Cartridge Assembly (CCA). The Band 2 is the last band that completes the suit of the 10 receiver channels of ALMA. The originally planned ALMA Band 2 receiver cartridge should cover the RF band of 67 - -90 GHz. The recent progress in technology, optics, OMT design and mm-wave amplifiers, however allowed to implement receiver that has an extended RF band up to 116 GHz. Furthermore, the Band 2 receiver pursues 2SB layout and provides 4-18 GHz IF band for two sidebands in a dual-polarization configuration. Here, we describe the design of the Band 2 CCA that includes optics, amplifier assembly, internal RF transport, mechanics and cryogenics. The downconverter part and performances are described elsewhere.
|
|
| 7. |
- Belitsky, Victor, 1955, et al.
(författare)
-
ALMA Band 5 receiver cartridge: Design, performance, and commissioning
- 2018
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 611
-
Tidskriftsartikel (refereegranskat)abstract
- We describe the design, performance, and commissioning results for the new ALMA Band 5 receiver channel, 163-211 GHz, which is in the final stage of full deployment and expected to be available for observations in 2018. This manuscript provides the description of the new ALMA Band 5 receiver cartridge and serves as a reference for observers using the ALMA Band 5 receiver for observations. At the time of writing this paper, the ALMA Band 5 Production Consortium consisting of NOVA Instrumentation group, based in Groningen, NL, and GARD in Sweden have produced and delivered to ALMA Observatory over 60 receiver cartridges. All 60 cartridges fulfil the new more stringent specifications for Band 5 and demonstrate excellent noise temperatures, typically below 45 K single sideband (SSB) at 4 K detector physical temperature and below 35 K SSB at 3.5 K (typical for operation at the ALMA Frontend), providing the average sideband rejection better than 15 dB, and the integrated cross-polarization level better than -25 dB. The 70 warm cartridge assemblies, hosting Band 5 local oscillator and DC bias electronics, have been produced and delivered to ALMA by NRAO. The commissioning results confirm the excellent performance of the receivers.
|
|
| 8. |
- Belitsky, Victor, 1955, et al.
(författare)
-
Design and performance of ALMA band 5 receiver cartridge
- 2010
-
Ingår i: 35th International Conference on Infrared Millimeter and Terahertz Waves (IRMMW-THz), 2010. - 9781424466559 ; , s. 1-2
-
Konferensbidrag (refereegranskat)abstract
- ALMA, Atacama Large Millimetre Array, covers the frequency band from 30 GHz to 960 GHz in ten separate frequency bands. We present here the design and performance of the ALMA Band 5 receiver cartridge that covers 163–211 GHz. The Band 5 receiver shows the state-of-the-art performance with the noise temperature below 65K (SSB) and sideband rejection above 12 dB over 80% of the RF band.
|
|
| 9. |
- Belitsky, Victor, 1955, et al.
(författare)
-
Facility Heterodyne Receiver for the Atacama Pathfinder Experiment Telescope
- 2007
-
Ingår i: Proceedings of Joint 32nd International Conference on Infrared Millimeter Waves and 15th International conference on Terahertz Electronics, Sept 3-7, 2007, City Hall, Cardiff, Wales, UK. ; , s. 326-328
-
Konferensbidrag (refereegranskat)
|
|
| 10. |
- Belitsky, Victor, 1955, et al.
(författare)
-
Prototype ALMA Band 5 Cartridge:Design and Performance
- 2009
-
Ingår i: Proceedings of the 20TH INTERNATIONAL SYMPOSIUM ON SPACE TERAHERTZ TECHNOLOGY, Charlottesville, VA, USA, April 20-22, 2009, s. 2-5.
-
Konferensbidrag (refereegranskat)abstract
- The Atacama Large Millimeter/submillimeterArray (ALMA), an international astronomy facility, is apartnership of East Asia, Europe and North America incooperation with the Republic of Chile and aims to build aninterferometer radio telescope consisting of more than 60antennas. The instrument is under construction at the Llano deChajnantor, about 50 km east of San Pedro de Atacama, Chile.This work presents a part of ALMA frontend, the development,design and performance of one of the frequency channels of theALMA receiver, the Band 5 prototype cartridge for 163 – 211GHz frequency band.
|
|
