| 1. |
- Kim, Jae-Young, et al.
(författare)
-
Event Horizon Telescope imaging of the archetypal blazar 3C 279 at an extreme 20 microarcsecond resolution
- 2020
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 640
-
Tidskriftsartikel (refereegranskat)abstract
- 3C 279 is an archetypal blazar with a prominent radio jet that show broadband flux density variability across the entire electromagnetic spectrum. We use an ultra-high angular resolution technique - global Very Long Baseline Interferometry (VLBI) at 1.3mm (230 GHz) - to resolve the innermost jet of 3C 279 in order to study its fine-scale morphology close to the jet base where highly variable-ray emission is thought to originate, according to various models. The source was observed during four days in April 2017 with the Event Horizon Telescope at 230 GHz, including the phased Atacama Large Millimeter/submillimeter Array, at an angular resolution of ∼20 μas (at a redshift of z = 0:536 this corresponds to ∼0:13 pc ∼ 1700 Schwarzschild radii with a black hole mass MBH = 8 × 108 M⊙). Imaging and model-fitting techniques were applied to the data to parameterize the fine-scale source structure and its variation.We find a multicomponent inner jet morphology with the northernmost component elongated perpendicular to the direction of the jet, as imaged at longer wavelengths. The elongated nuclear structure is consistent on all four observing days and across diffierent imaging methods and model-fitting techniques, and therefore appears robust. Owing to its compactness and brightness, we associate the northern nuclear structure as the VLBI "core". This morphology can be interpreted as either a broad resolved jet base or a spatially bent jet.We also find significant day-to-day variations in the closure phases, which appear most pronounced on the triangles with the longest baselines. Our analysis shows that this variation is related to a systematic change of the source structure. Two inner jet components move non-radially at apparent speeds of ∼15 c and ∼20 c (∼1:3 and ∼1:7 μas day-1, respectively), which more strongly supports the scenario of traveling shocks or instabilities in a bent, possibly rotating jet. The observed apparent speeds are also coincident with the 3C 279 large-scale jet kinematics observed at longer (cm) wavelengths, suggesting no significant jet acceleration between the 1.3mm core and the outer jet. The intrinsic brightness temperature of the jet components are ≤1010 K, a magnitude or more lower than typical values seen at ≥7mm wavelengths. The low brightness temperature and morphological complexity suggest that the core region of 3C 279 becomes optically thin at short (mm) wavelengths.
|
|
| 2. |
- Aad, G, et al.
(författare)
-
- 2015
-
swepub:Mat__t
|
|
| 3. |
- Berntsson, Lars-Olof, et al.
(författare)
-
EAST-ADL 2.0 Specification
- 2008
-
Rapport (refereegranskat)abstract
- This specification of the EAST ADL 2.0 is based on the EAST-ADL developed in the EAST EEA projectand has been further refined and harmonized with on-going modelling appraches in the automotiveindustry. It presents the modeling infrastructure, i.e. how the modeling elements should be represented inthe language and the UML representation. For each package a usage example is provided.The EAST-ADL 2.0 is harmonized with AUTOSAR.The metamodel and UML profile of EAST ADL 2.0 is defined in two steps: A domain (automotive)metamodel is defined, capturing only the domain specific needs of the language, without adding the UML2details. The basic concepts of UML are used for this purpose, such as classes, compositions andassociations. Based on the domain metamodel, a UML2 profile for the domain metamodel is defined,specifying stereotypes with properties and constraints.Comments on the content of this document are welcomed, and should be directed to .Please download the latest available specification and the XMI file ready for use in UML2 tools from the website.
|
|
| 4. |
- Bilenky, Samoil M., et al.
(författare)
-
Tests of CPT invariance at neutrino factories
- 2002
-
Ingår i: Physical Review D. Particles and fields. - : The American Physical Society. - 0556-2821 .- 1089-4918. ; 65:7, s. 073024-1-073024-6
-
Tidskriftsartikel (refereegranskat)abstract
- We investigate possible tests of CPT invariance on the level of event rates at neutrino factories. We do not assume any specific model but phenomenological differences in the neutrino-antineutrino masses and mixing angles in a Lorentz invariance preserving context, such as could be induced by physics beyond the standard model. We especially focus on the muon neutrino and antineutrino disappearance channels in order to obtain constraints on the neutrino-antineutrino mass and mixing angle differences; we found, for example, that the sensitivity \m(3)-(m) over bar (3)\less than or similar to1.9x10(-4) eV could be achieved.
|
|
| 5. |
- Cheng, Jingyuan, et al.
(författare)
-
Textile Building Blocks:Toward Simple, Modularized, and Standardized Smart Textile
- 2017
-
Ingår i: Smart Textiles. - Cham : Springer, Cham. - 9783319501239 - 9783319501246 ; , s. 303-331
-
Bokkapitel (refereegranskat)abstract
- Textiles are pervasive in our life, covering human body and objects, as well as serving in industrial applications. In its everyday use of individuals, smart textile becomes a promising medium for monitoring, information retrieval, and interaction. While there are many applications in sport, health care, and industry, the state-of-the-art smart textile is still found only in niche markets. To gain mass-market capabilities, we see the necessity of generalizing and modularizing smart textile production and application development, which on the one end lowers the production cost and on the other end enables easy deployment. In this chapter, we demonstrate our initial effort in modularization. By devising types of universal sensing fabrics for conductive and non-conductive patches, smart textile construction from basic, reusable components can be made. Using the fabric blocks, we present four types of sensing modalities, including resistive pressure, capacitive, bioimpedance, and biopotential. In addition, we present a multi-channel textile–electronics interface and various applications built on the top of the basic building blocks by ‘cut and sew’ principle.
|
|
| 6. |
- Freund, Martin, et al.
(författare)
-
Matter enhanced neutrino oscillations with a realistic earth density profile
- 2000
-
Ingår i: Modern Physics Letters A. - : World Scientific Publishing. - 0217-7323 .- 1793-6632. ; 15:13, s. 867-874
-
Tidskriftsartikel (refereegranskat)abstract
- We have investigated matter enhanced neutrino oscillations with a mantle-core-mantle step function and a realistic Earth matter density profile in both a two- and a three-neutrino scenario. We found that the realistic Earth matter density profile can be well approximated with the mantle-core-mantle step function and that there could be an influence on the oscillation channel nu(mu) --> nu(tau) due to resonant enhancement of one of the mixing angles.
|
|
| 7. |
|
|
| 8. |
- Hasseln, Herman, et al.
(författare)
-
The future design scenario and the SEA initiative
- 2004
-
Ingår i: IFAC Symposium on Advances in Automotive Control.
-
Konferensbidrag (refereegranskat)abstract
- The overall objective of the SEA Initiative is to develop a framework and aseamless process-flow for the design of complex embedded real-time systems inautomotive applications. Both framework and process -flow need to support the entireautomotive design chain from car manufacturers to subsystem providers, from IPproviders to semiconductor developers. These objectives address several key issues facedby the automotive industry, e.g. system complexity and efficiency:For the car manufacturer, where an increasing number of complex subsystems developedels ewhere have to be interfaced correctly and efficiently during system integration inpresence of increasing pressure for faster introduction of new models in the market place.For the subsystem suppliers, where the requirements on quality and costs become tighterwhile the features demanded become more complex, demanding designs withincreasingly larger software content and more performing hardware. For automotivesemiconductor and IP providers, who find it increasingly difficult to meet the reliabilityand performance requirements demanded by their customers while providing theirproducts so that they could be easily integrated and offer the performance required
|
|
| 9. |
|
|
| 10. |
- Pickering, John W., et al.
(författare)
-
Rapid Rule-out of Acute Myocardial Infarction With a Single High-Sensitivity Cardiac Troponin T Measurement Below the Limit of Detection A Collaborative Meta-analysis
- 2017
-
Ingår i: Annals of Internal Medicine. - 0003-4819 .- 1539-3704. ; 166:10, s. 715-724
-
Tidskriftsartikel (refereegranskat)abstract
- Background: High-sensitivity assays for cardiac troponin T (hs-cTnT) are sometimes used to rapidly rule out acute myocardial infarction (AMI). Purpose: To estimate the ability of a single hs-cTnT concentration below the limit of detection (<0.005 mu g/L) and a nonischemic electrocardiogram (ECG) to rule out AMI in adults presenting to the emergency department (ED) with chest pain. Data Sources: EMBASE and MEDLINE without language restrictions (1 January 2008 to 14 December 2016). Study Selection: Cohort studies involving adults presenting to the ED with possible acute coronary syndrome in whom an ECG and hs-cTnT measurements were obtained and AMI outcomes adjudicated during initial hospitalization. Data Extraction: Investigators of studies provided data on the number of low-risk patients (no new ischemia on ECG and hs-cTnT measurements <0.005 mu g/L) and the number who had AMI during hospitalization (primary outcome) or a major adverse cardiac event (MACE) or death within 30 days (secondary outcomes), by risk classification (low or not low risk). Two independent epidemiologists rated risk of bias of studies. Data Synthesis: Of 9241 patients in 11 cohort studies, 2825 (30.6%) were classified as low risk. Fourteen (0.5%) low-risk patients had AMI. Sensitivity of the risk classification for AMI ranged from 87.5% to 100% in individual studies. Pooled estimated sensitivity was 98.7% (95% CI, 96.6% to 99.5%). Sensitivity for 30-day MACEs ranged from 87.9% to 100%; pooled sensitivity was 98.0% (CI, 94.7% to 99.3%). No low-risk patients died. Limitation: Few studies, variation in timing and methods of reference standard troponin tests, and heterogeneity of risk and prevalence of AMI across studies. Conclusion: A single hs-cTnT concentration below the limit of detection in combination with a nonischemic ECG may successfully rule out AMI in patients presenting to EDs with possible emergency acute coronary syndrome.
|
|
