| 1. |
- Tunes, Matheus A., et al.
(författare)
-
From high-entropy alloys to high-entropy ceramics : The radiation-resistant highly concentrated refractory carbide (CrNbTaTiW)C
- 2023
-
Ingår i: Acta Materialia. - : Elsevier. - 1359-6454 .- 1873-2453. ; 250
-
Tidskriftsartikel (refereegranskat)abstract
- High-entropy materials represent the state-of-the-art on the alloy design strategy for future applications in extreme environments. Recent data indicates that high-entropy alloys (HEAs) exhibit outstanding radiation resistance in face of existing diluted alloy counterparts due to suppressed damage formation and evolution. An extension of the HEA concept is presented in this paper towards the synthesis and characterization of novel high-entropy ceramics as emergent materials for application in environments where energetic particle irradiation is a major concern. A novel carbide within the quinary refractory system CrNbTaTiW has been synthesized using magnetron-sputtering. The material exhibited nanocrystalline grains, single-phase crystal structure and C content around 50 at.%. Heavy-ion irradiation with in-situ Transmission Electron Microscopy was used to assess the irradiation response of the new high-entropy carbide (HEC) at 573 K and a comparison with the HEA within the system is made. No displacement damage effects appear within the microstructures of both HEA and HEC up to a dose of 10 displacements-per-atom. Surprisingly, the HEC has not amorphized under the investigated conditions. Xe was implanted in both materials and bubbles nucleated, but smaller sizes compared with conventional nuclear materials shedding light they are potential candidates for use in nuclear energy.
|
|
| 2. |
- Casillas Trujillo, Luis, et al.
(författare)
-
Experimental and theoretical evidence of charge transfer in multi-component alloys : how chemical interactions reduce atomic size mismatch
- 2021
-
Ingår i: Materials Chemistry Frontiers. - : Royal Society of Chemistry. - 2052-1537. ; 5:15, s. 5746-5759
-
Tidskriftsartikel (refereegranskat)abstract
- Ab initio simulations of a multi-component alloy using density functional theory (DFT) were combined with experiments on thin films of the same material using X-ray photoelectron spectroscopy (XPS) to study the connection between the electronic and atomic structures of multi-component alloys. The DFT simulations were performed on an equimolar HfNbTiVZr multi-component alloy. Structure and charge transfer were evaluated using relaxed, non-relaxed, as well as elemental reference structures. The use of a fixed sphere size model allowed quantification of charge transfer, and separation into different contributions. The charge transfer was generally found to follow electronegativity trends and results in a reduced size mismatch between the elements, and thus causes a considerable reduction of the lattice distortions compared to a traditional assumption based on tabulated atomic radii. A calculation of the average deviation from the average radius (i.e. the so-called δ-parameter) based on the atomic Voronoi volumes gave a reduction of δ from ca. 6% (using the volumes in elemental reference phases) to ca. 2% (using the volumes in the relaxed multi-component alloy phase). The reliability of the theoretical results was confirmed by XPS measurements of a Hf22Nb19Ti18V19Zr21 thin film deposited by sputter deposition. The experimentally observed core level binding energy shifts (CLS), as well as peak broadening due to a range of chemical surroundings, for each element showed good agreement with the calculated DFT values. The single solid solution phase of the sample was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM) including energy dispersive spectroscopy (EDS) with nm-resolution. These observations show that the HfNbTiVZr solid solution phase is non-ideal, and that chemical bonding plays an important part in the structure formation, and presumably also in the properties. Our conclusions should be transferable to other multi-component alloy systems, as well as some other multi-component material systems, and open up interesting possibilities for the design of material properties via the electronic structure and controlled charge transfer between selected metallic elements in the materials.
|
|
| 3. |
- Fritze, Jonas, et al.
(författare)
-
Loss of Cxcr5 alters neuroblast proliferation and migration in the aged brain
- 2020
-
Ingår i: Stem Cells. - : Oxford University Press (OUP). - 1066-5099 .- 1549-4918. ; 38:9, s. 1175-1187
-
Tidskriftsartikel (refereegranskat)abstract
- Neurogenesis, the production of new neurons from neural stem cells, dramatically decreases during aging concomitantly with increased inflammation both systemically and in the brain. However, the precise role of inflammation and whether local or systemic factors drive the neurogenic decline during aging is poorly understood. Here, we identify CXCR5/5/CXCL13 signaling as a novel regulator of neurogenesis in the aged brain. The chemokine Cxcl13 was found to be upregulated in the brain during aging. Loss of its receptor, Cxcr5, led to increased proliferation and decreased numbers of neuroblasts in the aged subventricular zone (SVZ), together with accumulation of neuroblasts in the rostral migratory stream and olfactory bulb (OB), without increasing the amount of new mature neurons in the OB. The effect on proliferation and migration was specific to neuroblasts and likely mediated through increased levels of systemic IL-6 and local Cxcl12 expression in the SVZ. Our study raises the possibility of a new mechanism by which interplay between systemic and local alterations in inflammation regulates neurogenesis during aging.
|
|
| 4. |
- Fritze, Stefan, et al.
(författare)
-
Elemental distribution and fracture properties of magnetron sputtered carbon supersaturated tungsten films
- 2024
-
Ingår i: Surface & Coatings Technology. - : Elsevier BV. - 0257-8972 .- 1879-3347. ; 477
-
Tidskriftsartikel (refereegranskat)abstract
- The combination of strength and toughness is a major driving force for alloy design of protective coatings, and nanocrystalline tungsten (W)-alloys have shown to be promising candidates for combining strength and toughness. Here we investigate the elemental distribution and the fracture toughness of carbon (C) alloyed W thin films prepared by non-reactive magnetron sputtering. W:C films with up to ~4 at.% C crystallize in a body-centered-cubic structure with a strong 〈hh0〉texture, and no additional carbide phases are observed in the diffraction pattern. Atom probe tomography and X-ray photoelectron spectroscopy confirmed the formation of such a supersaturated solid solution. The pure W film has a hardness ~13 GPa and the W:C films exhibit a peak hardness of ~24 GPa. In-situ micromechanical cantilever bending tests show that the fracture toughness decreases from ~4.5 MPa·m1/2 for the W film to ~3.1 MPa·m1/2 for W:C films. The results show that C can significantly enhance the hardness of W thin films while retaining a high fracture toughness.
|
|
| 5. |
- Fritze, Stefan, et al.
(författare)
-
Hard and crack resistant carbon supersaturated refractory nanostructured multicomponent coatings
- 2018
-
Ingår i: Scientific Reports. - : NATURE PUBLISHING GROUP. - 2045-2322. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- The combination of ceramic hardness with high crack resistance is a major challenge in the design of protective thin films. High entropy alloys have shown in earlier studies promising mechanical properties with a potential use as thin film materials. In this study, we show that small amounts of carbon in magnetron-sputtered multicomponent CrNbTaTiW films can lead to a significant increase in hardness. The film properties were strongly dependent on the metal composition and the most promising results were observed for TaW-rich films. They crystallised in a bcc structure with a strong (110) texture and coherent grain boundaries. It was possible to deposit films with 8 at.% C in a supersaturated solid-solution into the bcc structure without carbide formation. A major effect of carbon was a significant grain refinement, reducing the column diameter from approximately 35 to 10 nm. This resulted in an increase in hardness from 14.7 to 19.1 GPa while the reduced E-modulus stayed constant at 322 GPa. The carbon-containing films exhibited extremely little plastic deformation around the indent and no cracks were observed. These results show that supersaturation of carbon into high entropy films can be a promising concept to combine superior hardness with high crack resistance.
|
|
| 6. |
- Fritze, Stefan, et al.
(författare)
-
Influence of Carbon on Microstructure and Mechanical Properties of Magnetron Sputtered TaW Coatings
- 2020
-
Ingår i: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 196
-
Tidskriftsartikel (refereegranskat)abstract
- (Ta,W) and (Ta,W):C films with-5 at.% C were deposited by non-reactive magnetron sputtering. They crystallised in a bcc structure with a columnar microstructure. The solid solubility of C in (Ta,W) alloys is very low, which suggests that the (Ta,W):C films are supersaturated with respect to carbon. This was confirmed by diffraction and atom probe tomography (APT) showing that carbon is in the as-deposited (Ta,W):C films homogeneously distributed in the structure without carbide formation or carbon segregation. Annealing at 900 degrees C for 2 h showed no significant column coarsening but an increased defect density at the column boundaries in the (Ta,W):C films. The films were still supersaturated with respect to carbon but APT showed a partial segregation of carbon presumably to defect-rich column boundaries after annealing. The (Ta,W) films exhibited a hardness of-12-13 GPa. Alloying with carbon increased the hardness to-17 GPa. The hardness increased to-19 GPa for the annealed (Ta,W):C films. This annealing-induced hardness increase was explained by C segregation to the more defect-rich column boundaries, which restricts dislocation movements. (Ta,W):C coatings may be a potential alternative to ceramic coatings, worth exploring further by small scale mechanical testing to investigate if these materials are ductile.
|
|
| 7. |
- Fritze, Stefan, et al.
(författare)
-
Influence of Deposition Temperature on the Phase Evolution of HfNbTiVZr High-Entropy Thin Films
- 2019
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 12:4
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, we show that the phase formation of HfNbTiVZr high-entropy thin films is strongly influenced by the substrate temperature. Films deposited at room temperature exhibit an amorphous microstructure and are 6.5 GPa hard. With increasing substrate temperature (room temperature to 275 degrees C), a transition from an amorphous to a single-phased body-centred cubic (bcc) solid solution occurs, resulting in a hardness increase to 7.9 GPa. A higher deposition temperature (450 degrees C) leads to the formation of C14 or C15 Laves phase precipitates in the bcc matrix and a further enhancement of mechanical properties with a peak hardness value of 9.2 GPa. These results also show that thin films follow different phase formation pathways compared to HfNbTiVZr bulk alloys.
|
|
| 8. |
|
|
| 9. |
- Fritze, Stefan, et al.
(författare)
-
Magnetron sputtering of carbon supersaturated tungsten films-A chemical approach to increase strength
- 2021
-
Ingår i: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 208
-
Tidskriftsartikel (refereegranskat)abstract
- Tungsten (W)-based materials attract significant attention due to their superior mechanical properties. Here, we present a chemical approach based on the addition of carbon (C) for increased strength via the combination of three strengthening mechanisms in W thin films. W:C thin films with C concentrations up to-4 at.% were deposited by magnetron sputtering. All films exhibit a body-centred-cubic structure with strong texture and columnar growth behaviour. X-ray and electron diffraction measurements suggest the formation of supersaturated W:C solid solution phases. The addition of C reduced the average column width from-133 nm for W to-20 nm for the film containing-4 at.% C. The column refinement is explained by a mechanism where C acts as re-nucleation sites. The W film is-13 GPa hard, while the W:C films achieve a peak hardness of-24 GPa. The W:C films are-11 GPa harder than the W film, which is explained by a combination of grain refinement strengthening, solid solution strengthening and increased dislocation density. Additional micropillar compression tests showed that the flow stress increased upon C addition, from-3.8 to-8.3 GPa and no brittle fracture was observed.
|
|
| 10. |
|
|
