| 1. |
- Cederkall, Joakim, et al.
(author)
-
The ESSνSB project
- 2020
-
In: European Physical Society Conference on High Energy Physics, EPS-HEP2019. - Trieste, Italy : Sissa Medialab srl. ; EPS-HEP2019
-
Conference paper (peer-reviewed)abstract
- The ESS nu SB project aims to produce a neutrino beam of unique intensity for a long-baseline oscillation measurement of CP-violation in the leptonic sector. The project, supported within the H2020 framework programme of the European Union, is currently in a conceptual design study phase, and work is ongoing within the project to develop viable solutions for the upgrade of the linear accelerator of the European Spallation Source (ESS), for the associated ring accumulator and the high-power target stations, as well as to establish solutions for the near and far detectors. The unique strength of the project lies in the capability to produce a neutrino beam that is intense enough to place the far detector at the second oscillation maximum. Such a placement will reduce the sensitivity of the experiment to systematic errors, which, due to the recently established value of the neutrino mixing angle theta(13), is now known to limit the measurement precision at the first oscillation maximum. In this paper we outline the basic components of the project and discuss the status of the ongoing conceptual design study.
|
|
| 2. |
- Collaboration, The PANDA, et al.
(author)
-
Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR
- 2016
-
In: European Physical Journal A. - : Springer Publishing Company. - 1434-6001 .- 1434-601X. ; 52:10
-
Journal article (peer-reviewed)abstract
- Simulation results for future measurements of electromagnetic proton form factors at P ¯ ANDA (FAIR) within the PandaRoot software framework are reported. The statistical precision with which the proton form factors can be determined is estimated. The signal channel p¯ p→ e+e- is studied on the basis of two different but consistent procedures. The suppression of the main background channel, i.e.p¯ p→ π+π-, is studied. Furthermore, the background versus signal efficiency, statistical and systematical uncertainties on the extracted proton form factors are evaluated using two different procedures. The results are consistent with those of a previous simulation study using an older, simplified framework. However, a slightly better precision is achieved in the PandaRoot study in a large range of momentum transfer, assuming the nominal beam conditions and detector performance.
|
|
| 3. |
- Fedotov, Alexei, et al.
(author)
-
Experimental studies of the magnetized friction force
- 2006
-
In: Physical Review E. Statistical, Nonlinear, and Soft Matter Physics. - 1539-3755 .- 1550-2376. ; 74:6
-
Journal article (peer-reviewed)abstract
- High-energy electron cooling, presently considered as an essential tool for several applications in high-energy and nuclear physics, requires an accurate description of the friction force which ions experience by passing through an electron beam. Present low-energy electron coolers can be used for a detailed study of the friction force. In addition, parameters of a low-energy cooler can be chosen in a manner, to reproduce regimes expected in future high-energy operation. Here, we report a set of dedicated experiments in CELSIUS aimed at a detailed study of the magnetized friction force. Some results of the accurate comparison of experimental data with the friction force formulas are presented.
|
|
| 4. |
- Folsom, B. T., et al.
(author)
-
Stripping mechanisms and remediation for H- beams
- 2021
-
In: Physical Review Accelerators and Beams. - : American Physical Society. - 2469-9888. ; 24:7
-
Journal article (peer-reviewed)abstract
- Negative hydrogen ions are often used for injecting protons from linacs to storage rings via chargeexchange injection. In this process, the two electrons are stripped by a foil or laser to produce protons which can be merged with an existing beam without significantly affecting its dynamics, allowing high intensities of protons to be accumulated. However, this capability comes with the drawback that the outer electron of an H- ion has a low binding energy and can easily be stripped away prior to injection. This paper addresses the following stripping mechanisms: interactions with residual gas in the beam pipe, blackbody radiation from accelerator components, and electromagnetic fields from accelerator optics (Lorentz-force stripping) and particles within the bunch itself (intrabeam stripping); with a discussion on how to avoid excessive activation from stripped H degrees particles and protons. We also demonstrate that the proportion of stripped H degrees colliding with a nearby beam pipe or machine-element walls presents only roughly 10% of those lost in stripping; the remaining stripped particles traverse to the end of a linac or local straight section, which may relax the limits for allowable stripping-based beam loss in H- accelerators.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Gålnander, Björn
(author)
-
Thin Films and Deposition Processes Studied by Soft X-Ray Spectroscopy
- 2001
-
Doctoral thesis (other academic/artistic)abstract
- This thesis deals with studies of thin films using soft x-ray emission spectroscopy. Thin films are frequently used in optical, semiconductor and magnetic applications, and along with the development of thin film deposition techniques, there is a growing need for thin film characterisation and production control. Soft x-ray spectroscopy provides elemental as well as chemical bonding information and has the advantage of being relatively insensitive to electric and magnetic fields. It may thus be used in-situ during deposition for monitoring sputtering deposition.Thin films of TiVN were reactively co-sputtered using two targets, and soft x-ray spectroscopy and optical emission spectroscopy were used to determine the film composition in-situ. These measurements were compared with ex-situ elemental analysis as well as with computer simulations. The results agree qualitatively and indicate that soft x-ray spectroscopy can be used for in-situ determination of film composition. In another study, the composition of chromium nitride was studied in-situ under varying deposition conditions. The fraction of different stoichiometric phases in the deposited films as a function of nitrogen flow was determined in-situ.The thesis also deals with the angular dependence of soft x-ray emission spectroscopy. The angular dependence of the emission was measured and compared to simulations for layered samples consisting of different transition metals, one sample consisting of Fe(50Å)/Cu(100Å)/V(100Å)/Si and another set of samples consisting of Fe(XÅ)/V(100Å)/MgO, where X = 25, 50 and 100 Å. The measured angular variation can be described qualitatively by calculations including refractive effects. For measurements below the critical angle of reflection, only the top layer corresponding to the evanescent wave region of 20-50 Å is probed, whereas for larger grazing angles the probe depth reaches thousands of Å. This demonstrates the feasibility of using the angular dependence as a way of studying composition and layer thickness of thin films.
|
|
| 8. |
|
|
| 9. |
- Nyberg, Tomas, et al.
(author)
-
Studies of reactive sputtering of multi-phase chromium nitride
- 1997
-
In: JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS. - 0734-2101. ; 15:2, s. 248-252
-
Journal article (peer-reviewed)abstract
- We have presented a model for reactive sputter deposition of two-phase materials. This model has been applied to reactive sputtering of chromium nitride where it is assumed that either Cr2N or CrN is formed. In order to test the validity of the model, a n
|
|
| 10. |
- Singh, B., et al.
(author)
-
Feasibility study for the measurement of pi N transition distribution amplitudes at (P)over-barANDA in (P)over-barp -> J/psi pi(0)
- 2017
-
In: Physical Review D. - : AMER PHYSICAL SOC. - 2470-0010 .- 2470-0029. ; 95:3
-
Journal article (peer-reviewed)abstract
- The exclusive charmonium production process in (P) over barp annihilation with an associated pi 0 meson (p) over barp -> J/psi pi(0) is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the J/psi -> e(+) e(-) decay channel with the AntiProton ANnihilation at DArmstadt ((P) over bar ANDA) experiment is investigated. Simulations on signal reconstruction efficiency as well as the background rejection from various sources including the (P) over barp -> pi(+)pi(-)pi(0) and (p) over barp -> J/psi pi(0)pi(0) reactions are performed with PANDAROOT, the simulation and analysis software framework of the (P) over bar ANDA experiment. It is shown that the measurement can be done at (P) over bar ANDA with significant constraining power under the assumption of an integrated luminosity attainable in four to five months of data taking at the maximum design luminosity.
|
|
