1. |
- Alfredson, J., et al.
(författare)
-
Design of a distributed human factors laboratory for future air systems
- 2018
-
Ingår i: 31st Congress of the International Council of the Aeronautical Sciences, ICAS 2018. - : International Council of the Aeronautical Sciences. - 9783932182884
-
Konferensbidrag (refereegranskat)abstract
- This paper presents a rationale for structuring a distributed human factors laboratory for future air systems. The distributed herein refers to two aspects: content and geographic. As for content, the laboratory is structured in two levels, namely, individual, and team. As for geographic, the laboratory infrastructure is distributed in three physically separate facilities, namely, Department of Computer and Information Science (IDA) and Department of Management and Engineering (IEI) from Linköping University - Sweden and the Competence Center in Manufacturing from the Aeronautics Institute of Technology (ITA) - Brazil.
|
|
2. |
- Ekman, Petter, 1988-, et al.
(författare)
-
Aerodynamic Drag Reduction - from Conceptual Design on a Simplified Generic Model to Full-Scale Road Tests
- 2015
-
Ingår i: SAE 2015 World Congress & Exhibition. - 400 Commonwealth Drive, Warrendale, PA, United States : SAE International.
-
Konferensbidrag (refereegranskat)abstract
- Road transportation by trucks is the major part of the goods transportations system in the European Union (EU), and there is a need for increased fuel efficiency. While truck manufacturers already spend significant resources in order to reduce the emissions from their vehicles, most truck manufacturers do not control the shape of the trailer and/or swap bodies. These devices are usually manufactured by different companies that cannot consider the overall aerodynamics around the complete vehicle.By use of Computational Fluid Dynamics (CFD) and previous wind tunnel experiments, the flow around a simplified generic tractor-trailer model has been investigated. With better understanding of the flow features around the tractor with attached trailer or swap bodies, an improved design of the trailer and swap body can be achieved, which is the aim for the project. Special emphasis is put on achieving simple, easy to install or implement drag-reducing geometrical modifications to the trailer or swap bodies that can be mounted on existing trucks.Reynolds-Averaged Navier-Stokes (RANS) simulations were used for the conceptual development phase where trends in drag reduction due to the modified geometries were studied using a parameter study, while more advanced scale resolving simulations (SRS) were used in order to investigate the details of the flow fields.The investigation indicates that aerodynamic drag reduction is possible with quite simple geometrical modifications. Some of the results have also been verified through road tests of vehicles in commercial use, which has shown reduced fuel consumption of up to 5%.
|
|
3. |
- Ekman, Petter, 1988-, et al.
(författare)
-
Aerodynamic Drag Reduction of a Light Truck - from Conceptual Design to Full Scale Road Tests
- 2016
-
Ingår i: SAE 2016 World Congress and Exhibition. - 400 Commonwealth Drive, Warrendale, PA, United States : SAE International.
-
Konferensbidrag (refereegranskat)abstract
- Considerable amounts of the everyday goods transports are done using light trucks. In the last ten years (2005-2015), the number of light trucks has increased by 33 % in Sweden. The majority of these light trucks are fitted with a swap body and encounter the same problem as many other truck configurations, namely that several different manufacturers contribute to the final shape of the vehicle. Due to this, the aerodynamics of the final vehicle is often not fully considered. Hence there appears to be room for improving the aerodynamic performance. In this study the flow around a swap body fitted to a light truck has been investigated using Computational Fluid Dynamics. The focus has been on improving the shape of the swap body in order to reduce both the aerodynamic drag and fuel consumption, while still keeping it usable for daily operations. Reynolds-Averaged Navier-Stokes simulations were used for concept evaluation while more advanced Detached Eddy Simulations were performed on the best concept in order to investigate details of the flow. Various concepts were evaluated from which it could be seen that a more streamlined top of the swap body together with a lowered top trailing edge had a significant positive effect on the aerodynamic drag. A full scale light truck was equipped with a swap body with with these modifications for road tests. During a test period, a mean fuel consumption reduction of 12 % was measured, thus indicating a significantly reduced aerodynamic drag.
|
|
4. |
- Ekman, Petter, 1988-
(författare)
-
Important Factors for Accurate Scale-Resolving Simulations of Automotive Aerodynamics
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Road transports are responsible for almost 18 % of the greenhouse gas emission in Europe and are today the leading cause of air pollution in cities. Aerodynamic resistance has a significant effect on fuel consumption and hence the emission of vehicles. For electric vehicles, emissions are not affected by the aerodynamics as such but instead have a significant effect on the effective range of the vehicle.In 2017, a new measurement procedure was introduced, Worldwide Harmonized Light Vehicles Test Procedure (WLTP), for measuring emissions, fuel consumption, and range. This procedure includes a new test cycle with increased average driving speed compared to the former procedure, which thereby increases the importance of the aerodynamic resistance, as it drastically increases with speed. A second effect is that the exact car configuration sold to the customer needs to be certified in terms of fuel consumption and emissions. The result is that every possible combination of optional extras, which might affect the aerodynamic resistance, needs to be aerodynamically analyzed and possibly improved. From 2021, the European Commission will introduce stricter emission regulations for new passenger cars, with the fleet-wide average lowered to 95 grams CO2=km, which puts an even higher demand on achieving efficient aerodynamics.Virtual development of the aerodynamics of road vehicles is today used to a great extent, using Computational Fluid Dynamics, as it enables faster and cheaper development. However, achieving high accuracy for the prediction of the flow field and aerodynamic forces is challenging, especially given the complexity of both the vehicle geometry in itself and the surrounding flow field. Even for a simplified generic bluff body, accurately predicting the flow field and aerodynamic forces is a challenge. The main reason for this challenge of achieving results with high accuracy is the prediction of the complex behavior of turbulence. Scale-resolving simulation (SRS) methods, such as Large Eddy Simulation (LES), where most of the turbulent structures are resolved has in many studies shown high accuracy but unfortunately to a very high computational cost. It is primarily the small turbulent structures within the near-wall region that requires a _ne resolution in both space (the mesh) and in time. This fine resolution is the reason for the very high computational cost and makes LES unfeasible for practical use in industrial aerodynamic development at present and in the near future. By modeling the turbulent structures within the near-wall region using a Reynolds-Averaged Navier-Stokes (RANS) model, and resolving the turbulence outside the region with a LES model, a coarser resolution is possible to use, resulting in significantly lower computational cost. Which used RANS model is of high importance, and especially how much turbulent viscosity the model generates, as too high values can result in suppression of the resolved turbulence.The transitioning between the RANS and LES regions have a significant effect on the results. Faster transition enables more resolved turbulence, favorable for higher accuracy, but needs to be balanced with sufficient shielding of the RANS region. If resolving the turbulence occurs within the near-wall region, and the mesh is not sufficiently fine, it can result in poor accuracy.By increasing the time-step size and disregarding best-practice guides, the computational cost can be significantly reduced. The accuracy is reasonably insensitive to the larger time step sizes until a certain degree, thereby enabling computationally cheaper SRS to achieve high accuracy of aerodynamic predictions needed to meet present and future emission regulations.
|
|
5. |
- Gårdhagen, Roland, 1978-, et al.
(författare)
-
Assessment of Geometrical Influence on WSS Estimation in the Human Aorta
- 2006
-
Ingår i: WSEAS Transactions on Fluid Mechanics. - 1790-5087. ; 4:1, s. 318-326
-
Tidskriftsartikel (refereegranskat)abstract
- Computational fluid dynamics simulations were performed on a stenosed human aorta with poststenotic dilatation, in order to estimate wall shear stress (WSS). WSS is important due to its correlation with atherosclerosis. Both steady-state and non-stationary simulations were conducted. Three different models were created from a set of MRI images. Comparison of geometrically different models was accomplished by using geometrical landmarks and a comparison parameter. Geometrical differences had larger influence on WSS magnitude than inflow rotation in steady-state results for the models used. In non-stationary flow the largest differences in WSS are found when the flow velocity near the wall is low e.g. when the inflow is low or in recirculation regions.
|
|
6. |
|
|
7. |
|
|
8. |
|
|
9. |
|
|
10. |
|
|