| 1. |
- Coustenis, A., et al.
(författare)
-
TandEM : Titan and Enceladus mission
- 2009
-
Ingår i: Experimental astronomy. - : Springer Science and Business Media LLC. - 0922-6435 .- 1572-9508. ; 23:3, s. 893-946
-
Tidskriftsartikel (refereegranskat)abstract
- TandEM was proposed as an L-class (large) mission in response to ESA's Cosmic Vision 2015-2025 Call, and accepted for further studies, with the goal of exploring Titan and Enceladus. The mission concept is to perform in situ investigations of two worlds tied together by location and properties, whose remarkable natures have been partly revealed by the ongoing Cassini-Huygens mission. These bodies still hold mysteries requiring a complete exploration using a variety of vehicles and instruments. TandEM is an ambitious mission because its targets are two of the most exciting and challenging bodies in the Solar System. It is designed to build on but exceed the scientific and technological accomplishments of the Cassini-Huygens mission, exploring Titan and Enceladus in ways that are not currently possible (full close-up and in situ coverage over long periods of time). In the current mission architecture, TandEM proposes to deliver two medium-sized spacecraft to the Saturnian system. One spacecraft would be an orbiter with a large host of instruments which would perform several Enceladus flybys and deliver penetrators to its surface before going into a dedicated orbit around Titan alone, while the other spacecraft would carry the Titan in situ investigation components, i.e. a hot-air balloon (MontgolfiSre) and possibly several landing probes to be delivered through the atmosphere.
|
|
| 2. |
|
|
| 3. |
- Mousis, O., et al.
(författare)
-
Scientific rationale for Saturn's in situ exploration
- 2014
-
Ingår i: Planetary and Space Science. - : Elsevier BV. - 0032-0633 .- 1873-5088. ; 104, s. 29-47
-
Tidskriftsartikel (refereegranskat)abstract
- Remote sensing observations meet some limitations when used to study the bulk atmospheric composition of the giant planets of our solar system. A remarkable example of the superiority of in situ probe measurements is illustrated by the exploration of Jupiter, where key measurements such as the determination of the noble gases' abundances and the precise measurement of the helium mixing ratio have only been made available through in situ measurements by the Galileo probe. This paper describes the main scientific goals to be addressed by the future in situ exploration of Saturn placing the Galileo probe exploration of Jupiter in a broader context and before the future probe exploration of the more remote ice giants. In situ exploration of Saturn's atmosphere addresses two broad themes that are discussed throughout this paper: first, the formation history of our solar system and second, the processes at play in planetary atmospheres. In this context, we detail the reasons why measurements of Saturn's bulk elemental and isotopic composition would place important constraints on the volatile reservoirs in the protosolar nebula. We also show that the in situ measurement of CO (or any other disequilibrium species that is depleted by reaction with water) in Saturn's upper troposphere may help constraining its bulk O/H ratio. We compare predictions of Jupiter and Saturn's bulk compositions from different formation scenarios, and highlight the key measurements required to distinguish competing theories to shed light on giant planet formation as a common process in planetary systems with potential applications to most extrasolar systems. In situ measurements of Saturn's stratospheric and tropospheric dynamics, chemistry and cloud-forming processes will provide access to phenomena unreachable to remote sensing studies. Different mission architectures are envisaged, which would benefit from strong international collaborations, all based on an entry probe that would descend through Saturn's stratosphere and troposphere under parachute down to a minimum of 10 bar of atmospheric pressure. We finally discuss the science payload required on a Saturn probe to match the measurement requirements.
|
|
| 4. |
- Ravasio, A, et al.
(författare)
-
Single-Shot Diffractive Imaging with a Table-Top Femtosecond Soft X-Ray Laser-Harmonics Source
- 2009
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 103:2, s. 028104-
-
Tidskriftsartikel (refereegranskat)abstract
- Coherent x-ray diffractive imaging is a powerful method for studies on nonperiodic structures on the nanoscale. Access to femtosecond dynamics in major physical, chemical, and biological processes requires single-shot diffraction data. Up to now, this has been limited to intense coherent pulses from a free electron laser. Here we show that laser-driven ultrashort x-ray sources offer a comparatively inexpensive alternative. We present measurements of single-shot diffraction patterns from isolated nano-objects with a single 20 fs pulse from a table-top high-harmonic x-ray laser. Images were reconstructed with a resolution of 119 nm from the single shot and 62 nm from multiple shots.
|
|
| 5. |
- Cerutti, P. O., et al.
(författare)
-
The socioeconomic and environmental impacts of wood energy value chains in Sub-Saharan Africa : A systematic map protocol
- 2015
-
Ingår i: Environmental Evidence. - : Springer Science and Business Media LLC. - 2047-2382. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The vast majority of households in Sub-Saharan Africa (SSA) depend on wood energy - comprising firewood and charcoal - for their daily energetic needs. Such consumption trends are expected to remain a common feature of SSA's wood energy production and supply chains, at least in the short- to medium-terms. Notwithstanding its importance, wood energy generally has low priority in SSA national policies. However, the use of wood energy is often considered a key driver of unsustainable management and negative environmental consequences in the humid and dry forests. To date, unsystematic assessments of the socio-economic and environmental consequences of wood energy use have underplayed its significance, thus further hampering policy debates. Therefore, a more balanced approach which considers both demand and supply dynamics is needed. This systematic map aims at providing a comprehensive approach to understanding the role and impacts of wood energy across all regions and aspects in SSA. Methods: The objective of this systematic map is to collate evidence from studies of environmental and socio-economic impacts of wood energy value chains, by considering both demand and supply within SSA. The map questions are framed using a Populations, Exposure, Comparators and Outcomes (PECO) approach. We name the supply and demand of wood energy as the "exposure," composed of wood energy production, harvesting, processing, and consumption. The populations of interest include both the actors involved in these activities and the forest sites where these activities occur. The comparator is defined as those cases where the same wood energy activities occur with i) available/accessible alternative energy sources, ii) regulatory frameworks that govern the sector and iii) alternative technologies for efficient use. The outcomes of interest encompass both socioeconomic and environmental impacts that can affect more than the populations named above. For instance, in addition to the direct socioeconomic impacts felt by participants in the wood energy value chain, forest dwellers may experience livelihood changes due to forest degradation caused by external harvesters. Moreover, intensified deforestation in one area may concurrently lead to forest regeneration in another.
|
|
| 6. |
- Ougazzaden, A., et al.
(författare)
-
Growth of GaN by metal organic vapor phase epitaxy on ZnO-buffered c-sapphire substrates
- 2008
-
Ingår i: Journal of Crystal Growth. - : Elsevier BV. - 0022-0248 .- 1873-5002. ; 310:5, s. 944-947
-
Tidskriftsartikel (refereegranskat)abstract
- The materials quality and availability of large-area bulk GaN substrates is currently considered a key problem for the continuing development of improved GaN-based devices. Since industrial fabrication of bulk GaN substrates with suitable materials quality has proven very difficult, the opto-GaN industry is currently based on heteroepitaxy using either c-sapphire or 6H SiC substrates. ZnO is promising as a substrate material for GaN because it has the same wurtzite structure and a relatively small lattice mismatch (similar to 1.8%). In this study, we have successfully grown GaN by MOVPE on ZnO-buffered c-sapphire. The growth conditions required to both prevent ZnO degradation and grow monocrystal thin film of GaN have been obtained. SEM, HRXRD and micro-Raman characterizations underlined the presence of the two layers GaN and ZnO with high structural quality.
|
|
| 7. |
- Hort, O., et al.
(författare)
-
High-flux source of coherent XUV pulses for user applications
- 2019
-
Ingår i: Optics Express. - 1094-4087 .- 1094-4087. ; 27:6, s. 8871-8883
-
Tidskriftsartikel (refereegranskat)abstract
- We present experimental results obtained at a user-oriented XUV beamline implemented at the ELI Beamlines facility. The coherent XUV radiation is produced via high harmonic generation in gases in a loose focusing geometry. The heamline is designed to be driven by 1 kHz, 100 mJ, 20 Is pulses centered at a wavelength of 830 nm. Results such as XUV spectra, beam wavefront and pulse energy obtained during the heamline commissioning with a commercial 1 kHz, 5 mJ, 40 fs laser system are presented. A unique XUV spectrometer for source characterization designed to reach a very high sensitivity is described in detail, and we demonstrate a novel technique for single shot and every shot. XUV pulse energy measurement. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement.
|
|
| 8. |
- Jung, D, et al.
(författare)
-
On the analysis of inhomogeneous magnetic field spectrometer for laser-driven ion acceleration.
- 2015
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 1089-7623 .- 0034-6748. ; 86:3
-
Tidskriftsartikel (refereegranskat)abstract
- We present a detailed study of the use of a non-parallel, inhomogeneous magnetic field spectrometer for the investigation of laser-accelerated ion beams. Employing a wedged yoke design, we demonstrate the feasibility of an in-situ self-calibration technique of the non-uniform magnetic field and show that high-precision measurements of ion energies are possible in a wide-angle configuration. We also discuss the implications of a stacked detector system for unambiguous identification of different ion species present in the ion beam and explore the feasibility of detection of high energy particles beyond 100 MeV/amu in radiation harsh environments.
|
|
| 9. |
- Nuernberg, F., et al.
(författare)
-
Radiochromic film imaging spectroscopy of laser-accelerated proton beams
- 2009
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 1089-7623 .- 0034-6748. ; 80:3
-
Tidskriftsartikel (refereegranskat)abstract
- This article reports on an experimental method to fully reconstruct laser-accelerated proton beam parameters called radiochromic film imaging spectroscopy (RIS). RIS allows for the characterization of proton beams concerning real and virtual source size, envelope- and microdivergence, normalized transverse emittance, phase space, and proton spectrum. This technique requires particular targets and a high resolution proton detector. Therefore thin gold foils with a microgrooved rear side were manufactured and characterized. Calibrated GafChromic radiochromic film (RCF) types MD-55, HS, and HD-810 in stack configuration were used as spatial and energy resolved film detectors. The principle of the RCF imaging spectroscopy was demonstrated at four different laser systems. This can be a method to characterize a laser system with respect to its proton-acceleration capability. In addition, an algorithm to calculate the spatial and energy resolved proton distribution has been developed and tested to get a better idea of laser-accelerated proton beams and their energy deposition with respect to further applications.
|
|
| 10. |
|
|
