| 1. |
|
|
| 2. |
- An, Qingfan, 1997-, et al.
(författare)
-
Democratising eHealth design : empowering healthcare providers with healthcare design abilities through a co-creation training
- 2023
-
Ingår i: DS 123. - : The Design Society. - 9781912254194 ; , s. 235-240
-
Konferensbidrag (refereegranskat)abstract
- The market penetration of eHealth interventions is substantially lower than investors anticipated due to their low acceptance. Main causes include the use of top-down approaches and the tendency for research to concentrate on technology rather than service delivery from users’ perspective. Healthcare professionals have exclusive expert knowledge of evidence-based practice in a specific area, which may explain why many eHealth intervention development projects continue to use top-down approaches. It is therefore crucial to empower healthcare professionals with design skills and mindset. On the otherhand, the roles and responsibilities of designers in the twenty-first century have been controversial. Many farsighted designers assert that we are at a turning point of transforming design from an expert driven process focused on objects and services within a taken-for-granted social and economic order towards design practices that advocates design-led societal transition toward more sustainable futures. To foster the transformation, design education should cater to all abilities. Health CASCADE is a MarieSklodowska-Curie Innovative Training Network to consolidate co-creation as an effective tool to fight public health problems. Imparting the knowledge of co-creation in public health to healthcare professionals has the potential to alleviate the gap between design and healthcare, meanwhile provides opportunities for stakeholder participation in the development process to increase trust. This paper illustrates a curriculum development process partnered with a healthcare professional aiming for delivering knowledge of co-creation in public health to healthcare professionals working on designing eHealth programmes on the national healthcare support platform, 1177.se – Support and Treatment in Sweden.
|
|
| 3. |
- Andersson, H.M., et al.
(författare)
-
Application of digital speckle photography to measure thickness variations in the vacuum infusion process
- 2003
-
Ingår i: Polymer Composites. - : Wiley. - 0272-8397 .- 1548-0569. ; 24:3, s. 448-455
-
Tidskriftsartikel (refereegranskat)abstract
- A new method to measure the movement of the flexible bag used in vacuum infusion is presented. The method is based on an in-house developed stereoscopic digital speckle photography system (DSP). The advantage with this optical method, which is based on cross-correlation, is that the deflection of a large area can be continuously measured with a great accuracy (down to 10 μm. The method is at this stage most suited for research but can in the long run also be adopted in production control and optimization. By use of the method it was confirmed that a ditch is formed at the resin flow front and that there can be a considerable and seemingly perpetual compaction after complete filling. The existence of the ditch demonstrates that the stiffness of the reinforcement can be considerably reduced when it is wetted. Hence, the maximum fiber volume fraction can be larger than predicted from dry measurements of preform elasticity. It is likely that the overall thickness reduction after complete filling emanates from lubrication of the fibers combined with an outflow of the resin. Besides, the cross-linking starts and the polymer shrinks. Hence, the alteration in height will continue until complete cross-linking is reached.
|
|
| 4. |
- Andersson, Magnus, et al.
(författare)
-
Development of guidelines for the vacuum infusion process
- 2000
-
Ingår i: Proceedings of the 8th International Conference on Fibre Reinforced Composites, FRC 2000. - Cambridge : Woodhead Publishing Materials. - 1855735504 ; , s. 113-120
-
Konferensbidrag (refereegranskat)abstract
- The current trend towards increased use of vacuum infusion moulding for large surface area parts has increased the interest for an advanced modelling of the process. This paper presents a detailed experimental investigation of laminate thickness and out-of-plane flow front shape during impregnation of high permeability reinforcement on top of a non-crimp fabric reinforcement lay-up. The goal with the experiments is to increase the understanding of the process and to provide accurate data that can later be used for validation of numerical models. The laminate thickness was measured during impregnation with a stereoscopic digital speckle photography system and the flow front shape was determined by tracking of colour marks in the stacking. The laminate lay-ups studied are different combinations of non-crimp fabrics and flow layers while the resin used was a polyester developed specifically for vacuum infusion moulding. Results are presented both for the instantaneous thickness and the flow front shape for several different material combinations. It was found that the skewness of the flow front became more pronounced with increasing number of flow layers when the number of non-crimp fabric layers was kept constant. As a first step towards a complete numerical model of the impregnation process a simplified model for the compressibility and a proven model for permeability was implemented in a commercial CFD package that can handle moving boundaries and moving flow fronts. Only a qualitative comparison with experiments was done but the conclusion was that the overall behaviour of the model was encouraging. A validation of the numerical model based on the measurements in this paper is under development.
|
|
| 5. |
- Andersson, Magnus, et al.
(författare)
-
Flow-enhancing layers in the vacuum infusion process
- 2002
-
Ingår i: Polymer Composites. - : Wiley. - 0272-8397 .- 1548-0569. ; 23:5, s. 895-901
-
Tidskriftsartikel (refereegranskat)abstract
- The current trend towards increased use of vacuum infusion molding for large surface-area parts has increased the interest in an advanced modeling of the process. Because the driving pressure is limited to 1 atmosphere, it is essential to evaluate possible ways to accelerate the impregnation. One way of doing this is to use layers of higher permeability within the reinforcing stack, i.e. flow-enhancing layers. We present an experimental investigation of the flow front shape when using such layers. The through-thickness flow front was observed by making a number of color marks on the glass-mats forming the reinforcing stack, which became visible when the resin reached their position. The in-plane flow front was derived from observations of the uppermost layer. It turned out that existing analytical models agree very well with the experiments if effective permeability data is used, that is, permeability obtained from vacuum infusions. However, the fill-time was nearly twice as long as predicted from permeability data obtained in a stiff tool. This rather large discrepancy may be due to certain features of a flexible mold half and is therefore a topic for further research. The lead-lag to final thickness ratio is dependent on the position of the flow front and ranges form 5 to 10 for the cases tested. Interestingly the lead-lag has a miximum close to the inlet.
|
|
| 6. |
- Andersson, Magnus, et al.
(författare)
-
Numerical model for vacuum infusion manufacturing of polymer composites
- 2003
-
Ingår i: International journal of numerical methods for heat & fluid flow. - : Emerald. - 0961-5539 .- 1758-6585. ; 13:3, s. 383-394
-
Tidskriftsartikel (refereegranskat)abstract
- The focus is set on the development and evaluation of a numerical mgodel describing the impregnation stage of a method to manufacture fibre reinforced polymer composites, namely the vacuum infusion process. Examples of items made with this process are hulls to sailing yachts and containers for the transportation industry. The impregnation is characterised by a full 3D flow in a porous medium having an anisotropic, spatial- and time-dependent permeability. The numerical model has been implemented in a general and commercial computational fluid dynamic software through custom written subroutines that: couple the flow equations to the equations describing the stiffness of the fibre reinforcement; modify the momentum equations to account for the porous medium flow; remesh the computational domain in each time step to account for the deformation by pressure change. The verification of the code showed excellent agreement with analytical solutions and very good agreement with experiments. The numerical model can easily be extended to more complex geometry and to other constitutive equations for the permeability and the compressibility of the reinforcement.
|
|
| 7. |
|
|
| 8. |
- Bergström, John, et al.
(författare)
-
Estimation of numerical accuracy for the flow field in a draft tube
- 1999
-
Ingår i: International journal of numerical methods for heat & fluid flow. - : Emerald. - 0961-5539 .- 1758-6585. ; 9:4, s. 472-486
-
Tidskriftsartikel (refereegranskat)abstract
- The potential for overall efficiency improvements of modern hydro power turbines is a few percent. A significant part of the losses occurs in the draft tube. To improve the efficiency by analysing the flow in the draft tube, it is therefore necessary to do this accurately, i.e. one must know how large the iterative and the grid errors are. This was done by comparing three different methods to estimate errors. Four grids (122,976 to 4,592 cells) and two numerical schemes (hybrid differencing and CCCT) were used in the comparison. To assess the iterative error, the convergence history and the final value of the residuals were used. The grid error estimates were based on Richardson extrapolation and least square curve fitting. Using these methods we could, apart from estimate the error, also calculate the apparent order of the numerical schemes. The effects of using double or single precision and changing the under relaxation factors were also investigated. To check the grid error the pressure recovery factor was used. The iterative error based on the pressure recovery factor was very small for all grids (of the order 10-4 percent for the CCCT scheme and 10-10percent for the hybrid scheme). The grid error was about 10 percent for the finest grid and the apparent order of the numerical schemes were 1.6 for CCCT (formally second order) and 1.4 for hybrid differencing (formally first order). The conclusion is that there are several methods available that can be used in practical simulations to estimate numerical errors and that in this particular case, the errors were too large. The methods for estimating the errors also allowed us to compute the necessary grid size for a target value of the grid error. For a target value of 1 percent, the necessary grid size for this case was computed to 2 million cells.
|
|
| 9. |
- Bergström, John, et al.
(författare)
-
Time-phase averaging for the approximate solution of the flow in a hydraulic turbine
- 1999
-
Ingår i: Proceedings of ASME/JSME FEDSM'99. - : American Society of Mechanical Engineers.
-
Konferensbidrag (refereegranskat)abstract
- The refurbishment of old hydropower installations and the continuos development of new installations has increased the interest for better design tools to improve their efficiency. Computational fluid dynamics has been used with great success to improve the design of the runner. However, extensive model testing has been necessary to improve the design of the surrounding waterways. Even after testing, some uncertainty has remained concerning the difference between the model scale and the full scale turbine system. The current trend is therefore to include as much as possible of the water conduits with a simultaneous solution of the flow in the turbine runner in an effort to reduce the need for model testing. However, if high numerical accuracy is required the number of mesh points for a complete model of the turbine system has to be at least 10^7. The mesh size together with the need for a time dependent mesh in the runner makes it unlikely that a full simulation with a rotating runner and advanced turbulence modeling will be possible within the next several years, even if the most optimistic estimate of future computer capacity are taken into account. It is therefore of great interest to find new approximations that will make a more refined analysis of the waterways external to the runner possible.In this paper we present a model for the runner that preserves any flow non-uniformity existing at the inlet of the runner in a realistic way through the runner. This has enabled a complete analysis of the interaction of the flow through the penstock, spiral casing and guide vanes with the flow in the draft tube. The mesh requirement and the computational time is considerably reduced compared to a full simulation with a sliding mesh model for the runner. The main drawback with the new model is believed to be that the blade wakes are averaged out of the problem.The model we propose is based on a time-phase averaging technique. The essence of the model is similar to the time averaging technique used by Adamczyk (Adamczyk, 1985), but with different averaging time and different mathematical notation that makes it possible to use the model in a general case, i.e. both for axial and radial machines. A phase function is central to the technique and is introduced for weighting in the averaging procedure. The phase function makes it possible to time average the flow inside a runner. It is constructed with generalised functions and a geometrical description of the suction and pressure side of a runner blade at a reference position. Exact equations for the time-phase averaged variables are derived by a formal time-phase averaging of the governing equations. Some of the terms are accounted for in an approximate way in the present simulation but it is possible to calculate better approximations with a simulation of an isolated runner in a rotating coordinate system. However, even with the crude approximations that we have used the simulation produces realistic results for the particle paths through the runner.
|
|
| 10. |
- Burman, Jörgen, et al.
(författare)
-
Assessment of response surface-based optimization techniques unsteady flow around bluff bodies
- 2002
-
Ingår i: A collection of technical papers. - Reston, Va. : American Institute of Aeronautics and Astronautics, AIAA. - 1563475502
-
Konferensbidrag (refereegranskat)abstract
- The shape of a trapezoidal obstacle immersed in a 2D unsteady, viscous flow is optimized by response surface (RS) techniques based on combined criteria of minimum total drag and maximum mixing efficacy. Time-dependent Navier-Stokes computations are conducted to supply the database. In order to address the issues related to noise, an outlier analysis based on iteratively re-weighted least square (IRLS) method is applied. The results indicate that optimum designs having a low mean drag coefficient tend to be square-shaped, while designs having a large value of the mixing effectiveness are more trapezoidally-shaped. Both RS and IRLS models yield consistent designs, indicating that the present task is well handled by the techniques employed. In addition, the RS methodology is used to identify domains within the design space within which all designs are, for practical purpose, acceptable.
|
|
