| 1. |
|
|
| 2. |
- Wang, Chuanfei, 1986-, et al.
(författare)
-
Ternary Organic Solar Cells with Minimum Voltage Losses
- 2017
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6832 .- 1614-6840. ; 7:21
-
Tidskriftsartikel (refereegranskat)abstract
- A new strategy for designing ternary solar cells is reported in this paper. A low-bandgap polymer named PTB7-Th and a high-bandgap polymer named PBDTTS-FTAZ sharing the same bulk ionization potential and interface positive integer charge transfer energy while featuring complementary absorption spectra are selected. They are used to fabricate efficient ternary solar cells, where the hole can be transported freely between the two donor polymers and collected by the electrode as in one broadband low bandgap polymer. Furthermore, the fullerene acceptor is chosen so that the energy of the positive integer charge transfer state of the two donor polymers is equal to the energy of negative integer charge transfer state of the fullerene, enabling enhanced dissociation of all polymer donor and fullerene acceptor excitons and suppressed bimolecular and trap assistant recombination. The two donor polymers feature good miscibility and energy transfer from high-bandgap polymer of PBDTTS-FTAZ to low-bandgap polymer of PTB7-Th, which contribute to enhanced performance of the ternary solar cell.
|
|
| 3. |
- Wolkeba, Zewdneh Genene, 1983, et al.
(författare)
-
Recent Advances in the Synthesis of Conjugated Polymers for Supercapacitors
- 2024
-
Ingår i: Advanced Materials Technologies. - 2365-709X. ; 9:9
-
Forskningsöversikt (refereegranskat)abstract
- Conjugated polymers have attracted growing attention for versatile applications in energy storage due to their potential benefits including low-cost processing, molecular tunability, environmental benignity, and high mechanical flexibility. In particular, polymer-based organic electrode materials have shown significant progress in supercapacitor (SC) applications with superior electrochemical behaviors. The performances of SCs are closely related to the intrinsic characteristics of different polymers in the nanoscale and the morphological features of the polymer-based electrode materials obtained by different fabrication techniques in the macroscale. This review summarizes the design and synthesis of both p-type and n-type conjugated polymers, highlighting the pros and cons of three synthesis techniques: electrochemical polymerization, chemical polymerization, and in situ polymerization. The performances of conjugated polymers in SCs, their cycling stabilities, and structure-performance relationships are discussed. Moreover, the existing challenges and future directions of polymer-based SCs are considered with respect to energy density, stability, and large-scale production to promote commercialization.
|
|
| 4. |
- Alkadir Abdulahi, Birhan, 1985, et al.
(författare)
-
Structural engineering of pyrrolo[3,4-: F] benzotriazole-5,7(2 H,6 H)-dione-based polymers for non-fullerene organic solar cells with an efficiency over 12%
- 2019
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 7:33, s. 19522-19530
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, we have synthesized two wide band gap donor polymers based on benzo[1,2-b:4,5-b′]dithiophene (BDT) and pyrrolo[3,4-f]benzotriazole-5,7(2H,6H)-dione (TzBI), namely, PBDT-TzBI and PBDT-F-TzBI and studied their photovoltaic properties by blending them with ITIC as an acceptor. Polymer solar cell devices made from PBDT-TzBI:ITIC and PBDT-F-TzBI:ITIC exhibited power conversion efficiencies (PCEs) of 9.22% and 11.02% and while annealing at 160 °C, improved the device performances to 10.24% and 11.98%, respectively. Upon solvent annealing with diphenyl ether (DPE) (0.5%) and chlorobenzene (CB), the PCE of the PBDT-F-TzBI-based device increased to 12.12%. The introduction of the fluorinated benzodithiophene (BDT-F) moiety on the backbone of PBDT-F-TzBI improved the open circuit voltage, short circuit current and fill factor simultaneously. The high PCEs of the PBDT-F-TzBI:ITIC-based devices were supported by comparison and analysis of the optical and electronic properties, the charge carrier mobilities, exciton dissociation probabilities, and charge recombination behaviors of the devices.
|
|
| 5. |
- Bian, Qingzhen, et al.
(författare)
-
Reduced Nonradiative Voltage Loss in Terpolymer Solar Cells
- 2020
-
Ingår i: Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 11:10, s. 3796-3802
-
Tidskriftsartikel (refereegranskat)abstract
- The dissociation of hybrid local exciton and charge transfer excitons (LE-CT) in efficient bulk-heterojunction nonfullerene solar cells contributes to reduced nonradiative photovoltage loss, a mechanism that still remains unclear. Herein we studied the energetic and entropic contribution in the hybrid LE-CT exciton dissociation in devices based on a conjugated terpolymer. Compared with reference devices based on ternary blends, the terpolymer devices demonstrated a significant reduction in the nonradiative photovoltage loss, regardless of the acceptor molecule, be it fullerene or nonfullerene. Fourier transform photocurrent spectroscopy revealed a significant LE-CT character in the terpolymer-based solar cells. Temperature-dependent hole mobility and photovoltage confirm that entropic and energetic effects contribute to the efficient LE-CT dissociation. The energetic disorder value measured in the fullerene- or nonfullerene-based terpolymer devices suggested that this entropic contribution came from the terpolymer, a signature of higher disorder in copolymers with multiple aromatic groups. This gives new insight into the fundamental physics of efficient LE-CT exciton dissociation with smaller nonradiative recombination loss.
|
|
| 6. |
- Chen, Qiaonan, 1992, et al.
(författare)
-
Effects of Flexible Conjugation-Break Spacers of Non-Conjugated Polymer Acceptors on Photovoltaic and Mechanical Properties of All-Polymer Solar Cells
- 2022
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2311-6706 .- 2150-5551. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Highlights: A series of non-conjugated acceptor polymers with flexible conjugation-break spacers (FCBSs) of different lengths were synthesized.The effect of FCBSs length on solubility of the acceptor polymers, and their photovoltaic and mechanical properties in all-polymer solar cells were explored.This work provides useful guidelines for the design of semiconducting polymers by introducing FCBS with proper length, which can giantly improved properties that are not possible to be achieved by the state-of-the-art fully conjugated polymers. Abstract: All-polymer solar cells (all-PSCs) possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing. Introducing flexible conjugation-break spacers (FCBSs) into backbones of polymer donor (PD) or polymer acceptor (PA) has been demonstrated as an efficient approach to enhance both the photovoltaic (PV) and mechanical properties of the all-PSCs. However, length dependency of FCBS on certain all-PSC related properties has not been systematically explored. In this regard, we report a series of new non-conjugated PAs by incorporating FCBS with various lengths (2, 4, and 8 carbon atoms in thioalkyl segments). Unlike common studies on so-called side-chain engineering, where longer side chains would lead to better solubility of those resulting polymers, in this work, we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length (i.e., C2) in PA named PYTS-C2. Its all-PSC achieves a high efficiency of 11.37%, and excellent mechanical robustness with a crack onset strain of 12.39%, significantly superior to those of the other PAs. These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs, providing an effective strategy to fine-tune the structures of PAs for highly efficient and mechanically robust PSCs.[Figure not available: see fulltext.]
|
|
| 7. |
- Chvojka, Petr, et al.
(författare)
-
Expanded Multiband Super-Nyquist CAP Modulation for Highly Bandlimited Organic Visible Light Communications
- 2020
-
Ingår i: IEEE Systems Journal. - 1932-8184 .- 1937-9234. ; 14:2, s. 2544-2550
-
Tidskriftsartikel (refereegranskat)abstract
- In this article, we experimentally demonstrate a novel expanded nonorthogonal multiband super-Nyquist carrier-less amplitude and phase (m-ESCAP) modulation for bandlimited organic visible light communication (VLC) systems. The proposed scheme has the same bandwidth requirement as the conventional m-CAP while breaking the orthogonality between subcarriers by purposely overlapping them. We compare m-ESCAP with the conventional m-CAP and a compressed nonorthogonal version of m-CAP (m-SCAP) in terms of measured bit error rate (BER) performance, bit rates, and spectral efficiencies. We show that the m-ESCAP system offers improvement in the bit rate of $\sim$10% and 20% compared to the m-CAP and m-SCAP, respectively, and in the spectral efficiency of $\sim$20% compared to m-CAP. These gains are achieved at the cost of increased BER, which, however, remains below the 7% forward error correction limit.
|
|
| 8. |
- Filate, Tadele Tamenu, 1994, et al.
(författare)
-
Aqueous Processed All-Polymer Solar Cells with High Open-Circuit Voltage Based on Low-Cost Thiophene-Quinoxaline Polymers
- 2024
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 16:10, s. 12886-12896
-
Tidskriftsartikel (refereegranskat)abstract
- Eco-friendly solution processing and the low-cost synthesis of photoactive materials are important requirements for the commercialization of organic solar cells (OSCs). Although varieties of aqueous-soluble acceptors have been developed, the availability of aqueous-processable polymer donors remains quite limited. In particular, the generally shallow highest occupied molecular orbital (HOMO) energy levels of existing polymer donors limit further increases in the power conversion efficiency (PCE). Here, we design and synthesize two water/alcohol-processable polymer donors, poly[(thiophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-T)) and poly[(selenophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-Se)) with oligo(ethylene glycol) (OEG) side chains, having deep HOMO energy levels (∼−5.4 eV). The synthesis of the polymers is achieved in a few synthetic and purification steps at reduced cost. The theoretical calculations uncover that the dielectric environmental variations are responsible for the observed band gap lowering in OEG-based polymers compared to their alkylated counterparts. Notably, the aqueous-processed all-polymer solar cells (aq-APSCs) based on P(Qx8O-T) and poly[(N,N′-bis(3-(2-(2-(2-methoxyethoxy)-ethoxy)ethoxy)-2-((2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-methyl)propyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-(2,5-thiophene)] (P(NDIDEG-T)) active layer exhibit a PCE of 2.27% and high open-circuit voltage (VOC) approaching 0.8 V, which are among the highest values for aq-APSCs reported to date. This study provides important clues for the design of low-cost, aqueous-processable polymer donors and the fabrication of aqueous-processable OSCs with high VOC
|
|
| 9. |
- Filate, Tadele Tamenu, 1994, et al.
(författare)
-
Hydrophilic Conjugated Polymers for Sustainable Fabrication of Deep-Red Light-Emitting Electrochemical Cells
- 2024
-
Ingår i: Advanced Materials Technologies. - : John Wiley & Sons. - 2365-709X. ; 9:3
-
Tidskriftsartikel (refereegranskat)abstract
- It is crucial to develop functional electronic materials that can be processed from green solvents to achieve environmentally sustainable and cost-efficient printing fabrication of organic electronic devices. Here, the design and cost-efficient synthesis of two hydrophilic and emissive conjugated polymers, TQ-OEG and TQ2F-OEG, are presented, which are rendered hydrophilic through the grafting of oligo(ethylene glycol) (OEG) solubilizing groups onto the thiophene-quinoxaline conjugated backbone and thereby can be processed from a water:ethanol solvent mixture. It is shown that the introduction of the OEG groups enables for a direct dissolution of salts by the neat polymer for the attainment of solid-state ion mobility. These properties are utilized for the design and development of light-emitting electrochemical cells (LECs), the active materials of which can be solution cast from a water:ethanol-based ink. It is specifically shown that such an LEC device, comprising an optimized blend of the TQ2F-OEG emitter and a Li salt as the active material positioned between two air-stabile electrodes, delivers deep-red emission (peak wavelength = 670 nm) with a radiance of 185 µW m−2 at a low drive voltage of 2.3 V. This study contributes relevant information as to how polymers and LEC devices can be designed and fabricated to combine functionality with sustainability.
|
|
| 10. |
- Genene, Zewdneh, 1983, et al.
(författare)
-
A comparative study of the photovoltaic performances of terpolymers and ternary systems
- 2017
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 7:29, s. 17959-17967
-
Tidskriftsartikel (refereegranskat)abstract
- Random terpolymers were synthesized from the electron-rich unit thiophene as the donor and two electron-deficient units with complementary absorption as the acceptor. Polymer solar cells (PSCs) fabricated from these terpolymers were compared with those fabricated from the ternary blends of two alternating polymers to explore the best strategy for extending the light absorption range. The two approaches showed similar open-circuit voltages (Voc) but different short-circuit current densities (Jsc). The terpolymer strategy broadened the light absorption range and provided a high power conversion efficiency (PCE) of 5.8%. This is due to a high Jsc and high hole mobility. The device fabricated from the ternary blend exhibited a lower PCE (3.5%) compared to those fabricated from the terpolymers and alternating polymer blends due to the morphological incompatibility of the donor polymers. Our results illustrate the potential of the terpolymer systems as a promising strategy to effectively increase the light absorption and thereby performance of PSCs by combining two morphologically incompatible polymers.
|
|
