1. |
- Abadei, S., et al.
(författare)
-
DC field dependent properties of Na0.5 K0.5 NbO3/SiO2/Si structures at millimeter-wave frequencies
- 2001
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 78:13, s. 1900-1902
-
Tidskriftsartikel (refereegranskat)abstract
- Dielectric properties of laser-ablated 0.5-μm-thick c-axis epitaxial Na0.5K0.5NbO3 films on high-resistivity (7.7 Ω cm) silicon SiO2/Si substrate are studied experimentally at frequencies up to 40 GHz. For measurements, planar 0.5-μm-thick gold electrodes (interdigital and straight slot) are photolithography defined on the top surface of Na0.5K0.5NbO3 films. The slot width between the electrodes is 2 or 4 μm. 13% capacitance change at 40 V dc bias and Q factor more than 15 are observed at 40 GHz, which makes the structure useful for applications in electrically tunable millimeter-wave devices
|
|
2. |
- Abadei, S., et al.
(författare)
-
Low-frequency and microwave performances of laser-ablated epitaxial Na0.5K0.5NbO3 films on high-resistivity SiO2/Si substrates
- 2002
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 91:4, s. 2267-2276
-
Tidskriftsartikel (refereegranskat)abstract
- The dielectric properties of laser-ablated 0.5-mum-thick c-axis epitaxial Na0.5K0.5NbO3 (NKN) films on high-resistivity (>7.7 kOmega cm) silicon SiO2/Si substrates are studied experimentally in the temperature interval of 30-320 K and at frequencies of 1.0 MHz-40 GHz. The films are grown by laser ablation from a stoichiometric target. For the measurements, planar 0.5-mum-thick gold electrodes (interdigital and straight slot) are photolithography defined on the top surface of NKN films. The slot width between the electrodes is 2.0 or 4.0 mum. At low frequencies (f<1.0 GHz), the structure performance is that of a typical metal-dielectric-semiconductor type, where two of this type of capacitor are connected back to back. At these frequencies, the large change in the capacitance (more than 10 times at 1.0 MHz), due to the applied dc field, is mainly due to the changes in depletion layer thickness at the surface of silicon. The associated losses are also large, tan delta>1. At microwave frequencies (f>10 GHz), the voltage dependence of the capacitance is given by the NKN film. More than a 13% capacitance change at 40 V dc bias and a Q factor of more than 15 are observed at 40 GHz, which make the structure useful for applications in electrically tunable millimeter-wave devices.
|
|
3. |
- Setter, Nava, et al.
(författare)
-
Ferroelectric thin films: Review of materials, properties, and applications
- 2006
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 100:5, s. 051606-1-46-
-
Tidskriftsartikel (refereegranskat)abstract
- An overview of the state of art in ferroelectric thin films is presented. First, we review applications: microsystems' applications, applications in high frequency electronics, and memories based on ferroelectric materials. The second section deals with materials, structure (domains, in particular), and size effects. Properties of thin films that are important for applications are then addressed: polarization reversal and properties related to the reliability of ferroelectric memories, piezoelectric nonlinearity of ferroelectric films which is relevant to microsystems' applications, and permittivity and loss in ferroelectric films-important in all applications and essential in high frequency devices. In the context of properties we also discuss nanoscale probing of ferroelectrics. Finally, we comment on two important emerging topics: multiferroic materials and ferroelectric one-dimensional nanostructures. (c) 2006 American Institute of Physics.
|
|
4. |
- Abadei, S., et al.
(författare)
-
DC field dependent properties of Na0.5K0.5NbO3/SiO2/Si structures at millimeter-wave frequencies
- 2001
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 78:13, s. 1900-1902
-
Tidskriftsartikel (refereegranskat)abstract
- Dielectric properties of laser-ablated 0.5-mum-thick c-axis epitaxial Na0.5K0.5NbO3 films on high-resistivity (7.7 Omega cm) silicon SiO2/Si substrate are studied experimentally at frequencies up to 40 GHz. For measurements, planar 0.5-mum-thick gold electrodes (interdigital and straight slot) are photolithography defined on the top surface of Na0.5K0.5NbO3 films. The slot width between the electrodes is 2 or 4 mum. 13% capacitance change at 40 V dc bias and Q factor more than 15 are observed at 40 GHz, which makes the structure useful for applications in electrically tunable millimeter-wave devices.
|
|
5. |
- Abadei, S., et al.
(författare)
-
Microwave properties of tunable capacitors basee on magnetron sputtered ferroelectric Na0.5K0.5NbO3 film on low and high resistivity silicon substrates
- 2001
-
Ingår i: Integrated Ferroelectrics. - : Informa UK Limited. - 1058-4587 .- 1607-8489. ; 39:1-4, s. 359-366
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In this work, small signal DC voltage dependent dielectric permittivity, loss tangent, and tuneability of magnetron sputtered epitaxial Na0.5K0.5NO3 films are studied experimentally. (100)-oriented Na0.5K0.5NbO3 films are deposited onto SiO2-buffered CMOS grade low resistivity (p = 10-20 cm) and high resistivity (p = 15-45 kcm) silicon substrates. Planar capacitors with 2 or 4 m gaps between electrodes have been fabricated on top of ferroelectric films. These devices have been characterized in the frequency range 1.0 MHz to 50 GHz at temperatures 30 - 300K. Na0.5K0.5NbO3/SiO2/Si structures on high resistivity silicon substrate exhibit C-V performances typical for Metal-Insulator- Semiconductor (MIS) capacitors. At low frequencies, f 1.0 GHz, the large tuneability and large losses are associated with the MIS structure, while at higher microwave frequencies the tuneability is mainly associated with the ferroelectric, film. At 1.0 MHz and room temperature, the tuneability of Na0.5K0.5NbO3/SiO2/Si structures more than 90%, reducing to 10-15 % at 50 GHz. The losses decrease with increasing the DC bias and frequency. A Q-factor more than 15 at 50 GHz is observed. The dielectric permittivity of the Na0.5K0.5NbO3 film is in the range 50-150 at frequencies 0.045-50 GHz. On low resistivity substrate the performance of Na0.5K0.5NbO3 films is completely screened by the high losses in silicon, and the tuneability is negligible. © 2001 Taylor and Francis.
|
|
6. |
- Alleaume, PF, et al.
(författare)
-
A Highly Integrated Heterogeneous Micro- and mm-wave Platform
- 2010
-
Ingår i: IEEE MTT 2010 International Microwave Symposium.
-
Konferensbidrag (refereegranskat)abstract
- A highly integrated platform for micro- and mm-wave frequency applications is introduced. The platform utilizes heterogeneous process modules with integrated passive and tunable devices together with silicon and GaAs MMIC technology to achieve outstanding flexibility. The different process modules are accounted for and their feasibility is proven through a number of application demonstrators from 23 GHz telecom backhauling and 77 GHz automotive radar indicating excellent performance.
|
|
7. |
|
|
8. |
- Martin, David Michael
(författare)
-
Electro-Acoustic and Electronic Applications Utilizing Thin Film Aluminium Nitride
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In recent years there has been a huge increase in the growth of communication systems such as mobile phones, wireless local area networks (WLAN), satellite navigation and various other forms of wireless data communication that have made analogue frequency control a key issue. The increase in frequency spectrum crowding and the increase of frequency into microwave region, along with the need for minimisation and capacity improvement, has shown the need for the development of high performance, miniature, on-chip filters operating in the low to medium GHz frequency range. This has hastened the need for alternatives to ceramic resonators due to their limits in device size and performance, which in turn, has led to development of the thin film electro-acoustics industry with surface acoustic wave (SAW) and bulk acoustic wave (BAW) filters now fabricated in their millions. Further, this new technology opens the way for integrating the traditionally incompatible integrated circuit (IC) and electro-acoustic (EA) technologies, bringing about substantial economic and performance benefits. In this thesis the compatibility of aluminium nitride (AlN) to IC fabrication is explored as a means for furthering integration issues. Various issues have been explored where either tailoring thin film bulk acoustic resonator (FBAR) design, such as development of an improved solidly mounted resonator (SMR) technology, and use of IC technology, such as chemical mechanical polishing (CMP) or nickel silicide (NiSi), has made improvements beneficial for resonator fabrication or enabled IC integration. The former has resulted in major improvements to Quality factor, power handling and encapsulation respectively. The later has provided alternative methods to reduce electro- or acoustomigration, reduced device size, for plate waves, supplied novel low acoustic impedance material for high power applications and alternative electrodes for use in high temperature sensors. Another method to enhance integration by using the piezoelectric material, AlN, in the IC side has also been explored. Here methods for analysing AlN film contamination and stoichiometry have been used for analysis of AlN as a high-k dielectric material. This has even brought benefits in knowledge of film composition for use as a passivation material with SiC substrates, investigated in high power high frequency applications. Lastly AlN has been used as a buried insulator material for new silicon-on-insulator substrates (SOI) for increased heat conduction. These new substrates have been analysed with further development for improved performance indicated.
|
|
9. |
|
|
10. |
|
|