| 1. |
- Aitola, Kerttu, et al.
(författare)
-
High Temperature-Stable Perovskite Solar Cell Based on Low-Cost Carbon Nanotube Hole Contact
- 2017
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 29:17
-
Tidskriftsartikel (refereegranskat)abstract
- Mixed ion perovskite solar cells (PSC) are manufactured with a metal-free hole contact based on press-transferred single-walled carbon nanotube (SWCNT) film infiltrated with 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluorene (Spiro-OMeTAD). By means of maximum power point tracking, their stabilities are compared with those of standard PSCs employing spin-coated Spiro-OMeTAD and a thermally evaporated Au back contact, under full 1 sun illumination, at 60 degrees C, and in a N-2 atmosphere. During the 140 h experiment, the solar cells with the Au electrode experience a dramatic, irreversible efficiency loss, rendering them effectively nonoperational, whereas the SWCNT-contacted devices show only a small linear efficiency loss with an extrapolated lifetime of 580 h.
|
|
| 2. |
- Jeong, Jaeki, et al.
(författare)
-
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
- 2021
-
Ingår i: Nature. - : Springer Nature. - 0028-0836 .- 1476-4687. ; 592:7854, s. 381-385
-
Tidskriftsartikel (refereegranskat)abstract
- Metal halide perovskites of the general formula ABX(3)-where A is a monovalent cation such as caesium, methylammonium or formamidinium; B is divalent lead, tin or germanium; and X is a halide anion-have shown great potential as light harvesters for thin-film photovoltaics(1-5). Among a large number of compositions investigated, the cubic a-phase of formamidinium lead triiodide (FAPbI(3)) hasemerged as the most promising semiconductor for highly efficient and stable perovskite solar cells(6-9), and maximizing the performance of this material in such devices is of vital importance for the perovskite researchcommunity. Here we introduce an anion engineering concept that uses the pseudo-halide anion formate (HCOO-) to suppress anion-vacancy defects that are present at grain boundaries and at the surface of the perovskite films and to augment the crystallinity of the films. Theresulting solar cell devices attain a power conversion efficiency of 25.6 per cent (certified 25.2 per cent), have long-term operational stability (450 hours) and show intense electroluminescence with external quantum efficiencies of more than 10 per cent. Our findings provide a direct route to eliminate the most abundant and deleterious lattice defects present in metal halide perovskites, providing a facile access to solution-processable films with improved optoelectronic performance.
|
|
| 3. |
- Krebs, Frederik C, et al.
(författare)
-
A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules
- 2009
-
Ingår i: SOLAR ENERGY MATERIALS AND SOLAR CELLS. - : Elsevier BV. - 0927-0248. ; 93:11, s. 1968-1977
-
Tidskriftsartikel (refereegranskat)abstract
- A round robin for the performance of roll-to-roll coated flexible large-area polymer solar-cell modules involving 18 different laboratories in Northern America, Europe and Middle East is presented. The study involved the performance measurement of the devices at one location (Riso DTU) followed by transportation to a participating laboratory for performance measurement and return to the starting location (Riso DTU) for re-measurement of the performance. It was found possible to package polymer solar-cell modules using a flexible plastic barrier material in such a manner that degradation of the devices played a relatively small role in the experiment that has taken place over 4 months. The method of transportation followed both air-mail and surface-mail paths.
|
|
| 4. |
- Valdes, A., et al.
(författare)
-
Solar hydrogen production with semiconductor metal oxides: new directions in experiment and theory
- 2012
-
Ingår i: Physical Chemistry Chemical Physics. - : Royal Society of Chemistry (RSC). - 1463-9084 .- 1463-9076. ; 14:1, s. 49-70
-
Forskningsöversikt (refereegranskat)abstract
- An overview of a collaborative experimental and theoretical effort toward efficient hydrogen production via photoelectrochemical splitting of water into di-hydrogen and di-oxygen is presented here. We present state-of-the-art experimental studies using hematite and TiO(2) functionalized with gold nanoparticles as photoanode materials, and theoretical studies on electro and photo-catalysis of water on a range of metal oxide semiconductor materials, including recently developed implementation of self-interaction corrected energy functionals.
|
|
| 5. |
- Ahlawat, Paramvir, et al.
(författare)
-
A combined molecular dynamics and experimental study of two-step process enabling low-temperature formation of phase-pure alpha-FAPbI3
- 2021
-
Ingår i: Science Advances. - : American Association for the Advancement of Science (AAAS). - 2375-2548. ; 7:17
-
Tidskriftsartikel (refereegranskat)abstract
- It is well established that the lack of understanding the crystallization process in a two-step sequential deposition has a direct impact on efficiency, stability, and reproducibility of perovskite solar cells. Here, we try to understand the solid-solid phase transition occurring during the two-step sequential deposition of methylammonium lead iodide and formamidinium lead iodide. Using metadynamics, x-ray diffraction, and Raman spectroscopy, we reveal the microscopic details of this process. We find that the formation of perovskite proceeds through intermediate structures and report polymorphs found for methylammonium lead iodide and formamidinium lead iodide. From simulations, we discover a possible crystallization pathway for the highly efficient metastable alpha phase of formamidinium lead iodide. Guided by these simulations, we perform experiments that result in the low-temperature crystallization of phase-pure alpha-formamidinium lead iodide.
|
|
| 6. |
- Aitola, Kerttu, et al.
(författare)
-
Carbon nanotube-based hybrid hole-transporting material and selective contact for high efficiency perovskite solar cells
- 2016
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 9:2, s. 461-466
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate a high efficiency perovskite solar cell with a hybrid hole-transporting material-counter electrode based on a thin single-walled carbon nanotube (SWCNT) film and a drop-cast 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluorene (Spiro-OMeTAD) hole-transporting material (HTM). The average efficiency of the solar cells was 13.6%, with the record cell yielding 15.5% efficiency. The efficiency of the reference solar cells with spin-coated Spiro-OMeTAD hole-transportingmaterials (HTMs) and an evaporated gold counter electrode was 17.7% (record 18.8%), that of the cells with only a SWCNT counter electrode (CE) without additional HTM was 9.1% (record 11%) and that of the cells with gold deposited directly on the perovskite layer was 5% (record 6.3%). Our results show that it is possible to manufacture high efficiency perovskite solar cells with thin film (thickness less than 1 mu m) completely carbon-based HTMCEs using industrially upscalable manufacturing methods, such as press-transferred CEs and drop-cast HTMs.
|
|
| 7. |
- Anaraki, Elham Halvani, et al.
(författare)
-
Low-Temperature Nb-Doped SnO2 Electron-Selective Contact Yields over 20% Efficiency in Planar Perovskite Solar Cells
- 2018
-
Ingår i: ACS Energy Letters. - : American Chemical Society (ACS). - 2380-8195. ; 3:4, s. 773-778
-
Tidskriftsartikel (refereegranskat)abstract
- Low-temperature planar organic inorganic lead halide perovskite solar cells have been at the center of attraction as power conversion efficiencies go beyond 20%. Here, we investigate Nb doping of SnO2 deposited by a low-cost, scalable chemical bath deposition (CBD) method. We study the effects of doping on compositional, structural, morphological, and device performance when these layers are employed as electron-selective layers (ESLs) in planar-structured PSCs. We use doping concentrations of 0, 1, 5, and 10 mol % Nb to Sn in solution. The ESLs were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, and ultraviolet visible spectroscopy. ESLs with an optimum 5 mol % Nb doping yielded, on average, an improvement of all the device photovoltaic parameters with a champion power conversion efficiency of 20.5% (20.1% stabilized).
|
|
| 8. |
|
|
| 9. |
- Cao, Yiming, et al.
(författare)
-
11% efficiency solid-state dye-sensitized solar cells with copper(II/I) hole transport materials
- 2017
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Solid-state dye-sensitized solar cells currently suffer from issues such as inadequate nanopore filling, low conductivity and crystallization of hole-transport materials infiltrated in the mesoscopic TiO2 scaffolds, leading to low performances. Here we report a record 11% stable solid-state dye-sensitized solar cell under standard air mass 1.5 global using a hole-transport material composed of a blend of [Cu (4,4',6,6'-tetramethyl-2,2'-bipyridine)2(bis(trifluoromethylsulfonyl)imide)2 and [Cu (4,4',6,6'-tetramethyl-2,2'-bipyridine)2](bis(trifluoromethylsulfonyl)imide). The amorphous Cu(II/I) conductors that conduct holes by rapid hopping infiltrated in a 6.5 mm-thick mesoscopic TiO2 scaffold are crucial for achieving such high efficiency. Using time-resolved laser photolysis, we determine the time constants for electron injection from the photoexcited sensitizers Y123 into the TiO2 and regeneration of the Y123 by Cu(I) to be 25 ps and 3.2 μs, respectively. Our work will foster the development of low-cost solid-state photovoltaic based on transition metal complexes as hole conductors.
|
|
| 10. |
- Ferdowsi, Parnian, et al.
(författare)
-
Molecular Engineering of Simple Metal-Free Organic Dyes Derived from Triphenylamine for Dye-Sensitized Solar Cell Applications
- 2020
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 13:1, s. 212-220
-
Tidskriftsartikel (refereegranskat)abstract
- Two new metal-free organic sensitizers, L156 and L224, were designed, synthesized, and characterized for application in dye-sensitized solar cells (DSCs). The structures of the dyes contain a triphenylamine (TPA) segment and 4-(benzo[c][1,2,5]thiadiazol-4-yl)benzoic acid as electron-rich and -deficient moieties, respectively. Two different pi bridges, thiophene and 4,8-bis(4-hexylphenyl)benzo[1,2-b:4,5-b ']dithiophene, were used for L156 and L224, respectively. The influence of iodide/triiodide, [Co(bpy)(3)](2+/3+) (bpy=2,2 '-bipyridine), and [Cu(tmby)(2)](2+/+) (tmby=4,4 ',6,6 '-tetramethyl-2,2 '-bipyridine) complexes as redox electrolytes and 18 NR-T and 30 NR-D transparent TiO2 films on the DSC device performance was investigated. The L156-based DSC with [Cu(tmby)(2)](2+/+) complexes as the redox electrolyte resulted in the best performance of 9.26 % and a remarkably high open-circuit voltage value of 1.1 V (1.096 V), with a short-circuit current of 12.2 mA cm(-2) and a fill factor of 0.692, by using 30 NR-D TiO2 films. An efficiency of up to 21.9 % was achieved under a 1000 lx indoor light source, which proved that dye L156 was also an excellent candidate for indoor applications. The maximal monochromatic incident-photon-to-current conversion efficiency of L156-30 NR-D reached up to 70 %.
|
|
