| 1. |
- Akiyama, Kazunori, et al.
(författare)
-
First M87 Event Horizon Telescope Results. IV. Imaging the Central Supermassive Black Hole
- 2019
-
Ingår i: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 875:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present the first Event Horizon Telescope (EHT) images of M87, using observations from April 2017 at 1.3 mm wavelength. These images show a prominent ring with a diameter of similar to 40 mu as, consistent with the size and shape of the lensed photon orbit encircling the "shadow" of a supermassive black hole. The ring is persistent across four observing nights and shows enhanced brightness in the south. To assess the reliability of these results, we implemented a two-stage imaging procedure. In the first stage, four teams, each blind to the others' work, produced images of M87 using both an established method (CLEAN) and a newer technique (regularized maximum likelihood). This stage allowed us to avoid shared human bias and to assess common features among independent reconstructions. In the second stage, we reconstructed synthetic data from a large survey of imaging parameters and then compared the results with the corresponding ground truth images. This stage allowed us to select parameters objectively to use when reconstructing images of M87. Across all tests in both stages, the ring diameter and asymmetry remained stable, insensitive to the choice of imaging technique. We describe the EHT imaging procedures, the primary image features in M87, and the dependence of these features on imaging assumptions.
|
|
| 2. |
- Akiyama, Kazunori, et al.
(författare)
-
First M87 Event Horizon Telescope Results. V. Physical Origin of the Asymmetric Ring
- 2019
-
Ingår i: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 875:1
-
Tidskriftsartikel (refereegranskat)abstract
- The Event Horizon Telescope (EHT) has mapped the central compact radio source of the elliptical galaxy M87 at 1.3 mm with unprecedented angular resolution. Here we consider the physical implications of the asymmetric ring seen in the 2017 EHT data. To this end, we construct a large library of models based on general relativistic magnetohydrodynamic (GRMHD) simulations and synthetic images produced by general relativistic ray tracing. We compare the observed visibilities with this library and confirm that the asymmetric ring is consistent with earlier predictions of strong gravitational lensing of synchrotron emission from a hot plasma orbiting near the black hole event horizon. The ring radius and ring asymmetry depend on black hole mass and spin, respectively, and both are therefore expected to be stable when observed in future EHT campaigns. Overall, the observed image is consistent with expectations for the shadow of a spinning Kerr black hole as predicted by general relativity. If the black hole spin and M87's large scale jet are aligned, then the black hole spin vector is pointed away from Earth. Models in our library of non-spinning black holes are inconsistent with the observations as they do not produce sufficiently powerful jets. At the same time, in those models that produce a sufficiently powerful jet, the latter is powered by extraction of black hole spin energy through mechanisms akin to the Blandford-Znajek process. We briefly consider alternatives to a black hole for the central compact object. Analysis of existing EHT polarization data and data taken simultaneously at other wavelengths will soon enable new tests of the GRMHD models, as will future EHT campaigns at 230 and 345 GHz.
|
|
| 3. |
- Akiyama, Kazunori, et al.
(författare)
-
First M87 Event Horizon Telescope Results. VI. The Shadow and Mass of the Central Black Hole
- 2019
-
Ingår i: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 875:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present measurements of the properties of the central radio source in M87 using Event Horizon Telescope data obtained during the 2017 campaign. We develop and fit geometric crescent models (asymmetric rings with interior brightness depressions) using two independent sampling algorithms that consider distinct representations of the visibility data. We show that the crescent family of models is statistically preferred over other comparably complex geometric models that we explore. We calibrate the geometric model parameters using general relativistic magnetohydrodynamic (GRMHD) models of the emission region and estimate physical properties of the source. We further fit images generated from GRMHD models directly to the data. We compare the derived emission region and black hole parameters from these analyses with those recovered from reconstructed images. There is a remarkable consistency among all methods and data sets. We find that >50% of the total flux at arcsecond scales comes from near the horizon, and that the emission is dramatically suppressed interior to this region by a factor >10, providing direct evidence of the predicted shadow of a black hole. Across all methods, we measure a crescent diameter of 42 +/- 3 mu as and constrain its fractional width to be
|
|
| 4. |
- Broderick, Avery E., et al.
(författare)
-
THEMIS: A Parameter Estimation Framework for the Event Horizon Telescope
- 2020
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 897:2
-
Tidskriftsartikel (refereegranskat)abstract
- The Event Horizon Telescope (EHT) provides the unprecedented ability to directly resolve the structure and dynamics of black hole emission regions on scales smaller than their horizons. This has the potential to critically probe the mechanisms by which black holes accrete and launch outflows, and the structure of supermassive black hole spacetimes. However, accessing this information is a formidable analysis challenge for two reasons. First, the EHT natively produces a variety of data types that encode information about the image structure in nontrivial ways; these are subject to a variety of systematic effects associated with very long baseline interferometry and are supplemented by a wide variety of auxiliary data on the primary EHT targets from decades of other observations. Second, models of the emission regions and their interaction with the black hole are complex, highly uncertain, and computationally expensive to construct. As a result, the scientific utilization of EHT observations requires a flexible, extensible, and powerful analysis framework. We present such a framework, Themis, which defines a set of interfaces between models, data, and sampling algorithms that facilitates future development. We describe the design and currently existing components of Themis, how Themis has been validated thus far, and present additional analyses made possible by Themis that illustrate its capabilities. Importantly, we demonstrate that Themis is able to reproduce prior EHT analyses, extend these, and do so in a computationally efficient manner that can efficiently exploit modern high-performance computing facilities. Themis has already been used extensively in the scientific analysis and interpretation of the first EHT observations of M87.
|
|
| 5. |
- Eatough, Ralph P., et al.
(författare)
-
Verification of Radiative Transfer Schemes for the EHT
- 2020
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 897:2
-
Tidskriftsartikel (refereegranskat)abstract
- The Event Horizon Telescope (EHT) Collaboration has recently produced the first resolved images of the central supermassive black hole in the giant elliptical galaxy M87. Here we report on tests of the consistency and accuracy of the general relativistic radiative transfer codes used within the collaboration to model M87∗ and Sgr A∗. We compare and evaluate (1) deflection angles for equatorial null geodesics in a Kerr spacetime; (2) images calculated from a series of simple, parameterized matter distributions in the Kerr metric using simplified emissivities and absorptivities; (3) for a subset of codes, images calculated from general relativistic magnetohydrodynamics simulations using different realistic synchrotron emissivities and absorptivities; (4) observables for the 2017 configuration of EHT, including visibility amplitudes and closure phases. The error in total flux is of order 1% when the codes are run with production numerical parameters. The dominant source of discrepancies for small camera distances is the location and detailed setup of the software "camera"that each code uses to produce synthetic images. We find that when numerical parameters are suitably chosen and the camera is sufficiently far away the images converge and that for given transfer coefficients, numerical uncertainties are unlikely to limit parameter estimation for the current generation of EHT observations. The purpose of this paper is to describe a verification and comparison of EHT radiative transfer codes. It is not to verify EHT models more generally.
|
|
| 6. |
|
|
| 7. |
- Gu, Ziyan, 1969-
(författare)
-
Local magnetic susceptometry : Visualizing functional properties of novel materials
- 2005
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- One of the rapidly growing instrumentation technologies of late has been Surface Probe Microscopy. Since the award of the Nobel Prize in 1986, this form of instrumentation has expanded into various fascinating forms and is successfully enabling investigations at a nano-scale. A particular type of SPM method, Magnetic Force Microscopy, (MFM) enables visualization of magnetic domain structures of various materials at several nano to micron scale. However, obtaining quantitative information about magnetic properties of materials is difficult since this method is cantilever tip-surface interaction dependent and calibration is not straightforward. The purpose of this thesis work is to fill the gap, and exploit it to investigate many functional properties of novel materials. Experimental development takes time and if it is to be patented, then clearly no public disclosures on related studies are possible until the patents have been filed. Thus this thesis contains the following as yet unpublished work.: • Invention of a new Sensor Head and development of the next generation Desk-top Local Magnetic Susceptometer (DLMS) Reasonable description of the sensor head and its operation are included in this section – more details not included in this thesis are a part of the US Patent Document (Filed on May 27, 2005.) The DLMS instrumentation is one of its kind and there exists no commercial equivalent today. • Demonstration of the applications of above new DLMS to investigate local magnetic phenomena in a variety of advanced materials like: 1) First observation of Deformation induced Ferromagnetism, DILM, in Iron Aluminide sheets. We know of no other material which exhibits this unique property of developing local ferromagnetism upon deformation. ..more details than in the thesis are a part of the US Patent application entitled ‘Iron Aluminde Readable Medium’ (Filed on May 27, 2005.) 2) Micro-indentation and its consequence on the local magnetic properties, with magnetic imaging of the local structure of these indents in the Iron Aluminide Sheets in the thickness range 180 to 200 μm. 3) Strain induced dislocations, their propagation, formation of magnetic precipitates of phase separated compounds in high performance Stainless Steel, and even the development of martensitic transformations in cast steels (in collaboration with Prof. Takagi at Tohoku University). 4) Monitoring magnetic particles and aggregates and their evolution in space and time from targeted drugs labelled with magnetic particles; 5) Invention of a method to develop patterned ferromagnetic entities in flexible Kapton and imaging the local magnetic structure – study towards the media enabling future transparent electronics • In addition following studies have been carried out and reported: 1) Tailored Bulk Glassy material to produce materials with unusually high mechanical hardness property known so far in any metallic system, and 2) A comparison of Physical Properties of melt-spun and bulk glassy materials 3) The co-existence of Superconductivity and Ferromagnetism in NiBi alloys.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
