| 1. |
- Akhtar, Sultan, et al.
(författare)
-
Real-Space Transmission Electron Microscopy Investigations of Attachment of Functionalized Magnetic Nanoparticles to DNA-Coils Acting as a Biosensor
- 2010
-
Ingår i: Journal of Physical Chemistry B. - : American Chemical Society (ACS). - 1520-6106 .- 1520-5207. ; 114:41, s. 13255-13262
-
Tidskriftsartikel (refereegranskat)abstract
- The present work provides the first real-space analysis of nanobead-DNA coil interactions. Immobilization of oligonucleotide-functionalized magnetic nanobeads in rolling circle amplified DNA-coils was studied by complex magnetization measurements and transmission electron microscopy (TEM), and a statistical analysis of the number of beads hybridized to the DNA-coils was performed. The average number of beads per DNAcoil using the results from both methods was found to be around 6 and slightly above 2 for samples with 40 and 130 nm beads, respectively. The TEM analysis supported an earlier hypothesis that 40 nm beads are preferably immobilized in the interior of DNA-coils whereas 130 nm beads, to a larger extent, are immobilized closer to the exterior of the coils. The methodology demonstrated in the present work should open up new possibilities for characterization of interactions of a large variety of functionalized nanoparticles with macromolecules, useful for gaining more fundamental understanding of such interactions as well as for optimizing a number of biosensor applications.
|
|
| 2. |
- Almqvist, Bjarne, et al.
(författare)
-
Magnetic characterisation of magnetite and hematite from the Blötberget apatite-iron-oxide deposits (Bergslagen), south-central Sweden
- 2019
-
Ingår i: Canadian journal of earth sciences (Print). - : Canadian Science Publishing. - 0008-4077 .- 1480-3313. ; 56:9, s. 948-957
-
Tidskriftsartikel (refereegranskat)abstract
- Rock magnetic measurements were carried out on drill core material and hand specimens from the Blötberget apatite-iron oxide deposit in the Bergslagen ore province, south-central Sweden, to characterise their magnetic properties. Measurements included several kinds of magnetic susceptibility and hysteresis parameters. Petrographic and scanning electron microscopy (SEM) were used to independently identify and quantify the amount and type of magnetite and hematite. Two hematite-rich samples were studied with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) to quantify the trace element chemistry in hematite and investigate the potential influence of trace elements on magnetic properties. Three aspects of this study are noteworthy. 1) Hematite-rich samples display strong anisotropy of magnetic susceptibility, which is likely to affect the appearance and modelling of magnetic anomalies. 2) The magnitude-drop in susceptibility across Curie and Néel temperature transitions show significant correlation with the respective weight percent (wt%) of magnetite and hematite. Temperature dependent magnetic susceptibility measurements can therefore be used to infer the amounts of both magnetite and hematite. 3) observations of a strongly depressed Morin transition at ca -60 to -70 C (200 to 210 K) are made during low-temperature susceptibility measurements. This anomalous Morin transition is most likely related to trace amounts of V and Ti that substitute for Fe in the hematite. When taken together, these magnetic observations improve the understanding of the magnetic anomaly signature of the Blötberget apatite-iron oxide deposits and may potentially be utilised in a broader context when assessing similar (Paleoproterozoic) apatite-iron oxide systems.
|
|
| 3. |
- Andersson, Klas, 1977, et al.
(författare)
-
3D-Modelling of the Radiative Heat Transfer in Rotary Kilns with a Present Bed Material
- 2018
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- This work presents a 3D-model of the radiative heat transfer in cylindrical furnaces with a present bed material. Experimental data gathered in a down-scaled version of a rotary kiln has been used as input data to the model analysis. In future work, the model is to be used to study full-scale rotary kilns used in different industries such as the iron ore industry, heating and sintering iron ore pellets.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Bejhed Stjernberg, Rebecca, et al.
(författare)
-
Magnetophoretic Transport Line System for Rapid On-Chip Attomole Protein Detection
- 2015
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 31:37, s. 10296-10302
-
Tidskriftsartikel (refereegranskat)abstract
- A lab-on-a-chip traveling wave magnetophoresis approach for sensitive and rapid protein detection is reported. In this method, a chip-based magnetic microarray comprising lines of micrometer-sized thin film magnetic elements was used to control the movement of magnetic beads (MBs). The MBs and the chip were functionalized, forming a sandwich-type assay. The MBs were transported across a detection area, and the presence of target molecules resulted in the immobilization of MBs within this area. Target quantification was accomplished by MB counting in the detection area using an optical microscope. In order to demonstrate the versatility of the microarray, biotinylated antiavidin was selected as the target protein. In this case, avidin-functionalized MBs and an avidin-functionalized detection area were used. With a total assay time of 1 to 1.5 h (depending on the labeling approach used), a limit of detection in the attomole range was achieved. Compared to on-chip surface plasmon resonance biodetection systems, our method has a larger dynamic range and is about a factor of 500 times more sensitive. Furthermore, our MB transportation system can operate in any chip-based biosensor platform, thereby significantly improving traditional biosensors.
|
|
| 7. |
|
|
| 8. |
- Bonaglia, Stefano, et al.
(författare)
-
Activated carbon stimulates microbial diversity and PAH biodegradation under anaerobic conditions in oil-polluted sediments
- 2020
-
Ingår i: Chemosphere. - : Elsevier BV. - 0045-6535 .- 1879-1298. ; 248
-
Tidskriftsartikel (refereegranskat)abstract
- Biodegradation by microorganisms is a useful tool that helps alleviating hydrocarbon pollution in nature. Microbes are more efficient in degradation under aerobic than anaerobic conditions, but the majority of sediment by volume is generally anoxic. Incubation experiments were conducted to study the biodegradation potential of naphthalene-a common polycyclic aromatic hydrocarbon (PAH)-and the diversity of microbial communities in presence/absence of activated carbon (AC) under aerobic/anaerobic conditions. Radio-respirometry experiments with endogenous microorganisms indicated that degradation of naphthalene was strongly stimulated (96%) by the AC addition under anaerobic conditions. In aerobic conditions, however, AC had no effects on naphthalene biodegradation. Bioaugmentation tests with cultured microbial populations grown on naphthalene showed that AC further stimulated (92%) naphthalene degradation in anoxia. Analysis of the 16S rRNA gene sequences implied that sediment amendment with AC increased microbial community diversity and changed community structure. Moreover, the relative abundance of Geobacter, Thiobacillus, Sulfuricurvum, and methanogenic archaea increased sharply after amendment with AC under anaerobic conditions. These results may be explained by the fact that AC particles promoted direct interspecies electron transfer (DIET) between microorganisms involved in PAH degradation pathways. We suggest that important ecosystem functions mediated by microbes-such as hydrocarbon degradation-can be induced and that AC enrichment strategies can be exploited for facilitating bioremediation of anoxic oil-contaminated sediments and soils.
|
|
| 9. |
- Bäckström, Daniel, 1985, et al.
(författare)
-
Measurement of the size distribution, volume fraction and optical properties of soot in an 80 kW propane flame
- 2017
-
Ingår i: Combustion and Flame. - : Elsevier BV. - 0010-2180 .- 1556-2921. ; 186, s. 325-334
-
Tidskriftsartikel (refereegranskat)abstract
- This work presents measurements of the size distribution, volume fraction, absorption and scattering coefficients of soot in an 80 kW swirling propane-fired flame. Extractive measurements were performed in the flame using an oil-cooled particle extraction probe. The particle size distribution was measured with a Scanning Mobility Particle Sizer (SMPS) and the optical properties were measured using a Photo Acoustic Soot Spectrometer (PASS-3). A detailed radiation model was used to examine the influence of the soot volume fraction on the particle radiation intensity. The properties of the gas were calculated with a statistical narrow-band model and the particle properties were calculated using Rayleigh theory with four different complex indices of refraction for soot particles. The modelled radiation was compared with measured total radiative intensity, the latter which was measured with a narrow angle radiometer. The results show that the measured soot volume fraction yields particle radiation that corresponds well with the determined difference between gas and total radiation. This indicates that the presented methodology is capable of quantifying both the particle and gaseous radiation in a flame of technical size. (C) 2017 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
|
|
| 10. |
- Cedervall, Johan, et al.
(författare)
-
Influence of cobalt substitution on the magnetic properties of Fe5PB2
- 2018
-
Ingår i: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 57:2, s. 777-784
-
Tidskriftsartikel (refereegranskat)abstract
- In this study the effects of cobalt substitutions in Fe5PB2 have been studied. An increased cobalt content reduces the magnetic exchange interactions. This has been concluded from a large, linear decrease in both the Curie temperature as well as the saturated magnetic moment. At high cobalt concentrations, cobalt prefers to order at the M(2) position in the crystal structure. A tunable Curie transition like this shows some prerequisites for magnetic cooling applications.The substitutional effects of cobalt in (Fe1–xCox)5PB2 have been studied with respect to crystalline structure and chemical order with X-ray diffraction and Mössbauer spectroscopy. The magnetic properties have been determined from magnetic measurements, and density functional theory calculations have been performed for the magnetic properties of both the end compounds, as well as the chemically disordered intermediate compounds. The crystal structure of (Fe1–xCox)5PB2 is tetragonal (space group I4/mcm) with two different metal sites, with a preference for cobalt atoms in the M(2) position (4c) at higher cobalt contents. The substitution also affects the magnetic properties with a decrease of the Curie temperature (TC) with increasing cobalt content, from 622 to 152 K for Fe5PB2 and (Fe0.3Co0.7)5PB2, respectively. Thus, the Curie temperature is dependent on composition, and it is possible to tune TC to a temperature near room temperature, which is one prerequisite for magnetic cooling materials.
|
|
