| 1. |
- Asmolov, V.G., et al.
(författare)
-
Crucible-type core catcher for VVER-1000 reactor
- 2005
-
Ingår i: Proceedings of the American Nuclear Society - International Congress on Advances in Nuclear Power Plants 2005, ICAPP'05. - : Curran Associates, Inc.. - 9781604236934 ; , s. 1221-1227
-
Konferensbidrag (refereegranskat)abstract
- For new designs of NPPs with VVER-1000 reactors a crucible-type core catcher has been developed to stabilize and cool down molten corium in the reactor pit. The paper addresses distinguishing features of the concept including the "sacrificial" material and the core catcher design. Main phenomena in the catcher have been analyzed.
|
|
| 2. |
- Bechta, Sevostian, et al.
(författare)
-
Experimental studies of oxidic molten corium-vessel steel interaction
- 2001
-
Ingår i: Nuclear Engineering and Design. - 0029-5493 .- 1872-759X. ; 210:1-3, s. 193-224
-
Tidskriftsartikel (refereegranskat)abstract
- The experimental results of molten corium-steel specimen interaction with molten corium on the 'Rasplav-2' test facility are presented. In the experiments, cooled vessel steel specimens positioned on the molten pool bottom and uncooled ones lowered into the molten pool were tested. Interaction processes were studied for different corium compositions, melt superheating and in alternative (inert and air) overlying atmosphere. Hypotheses were put forward explaining the observed phenomena and interaction mechanisms. The studies presented in the paper were aimed at the detection of different corium-steel interaction mechanisms. Therefore certain identified phenomena are more typical of the ex-vessel localization conditions than of the in-vessel corium retention. Primarily, this can be referred to the phenomena of low-temperature molten corium-vessel steel interaction in oxidizing atmosphere.
|
|
| 3. |
|
|
| 4. |
- Bechta, Sevostian, et al.
(författare)
-
Influence of corium oxidation on fission product release from molten pool
- 2010
-
Ingår i: Nuclear Engineering and Design. - : Elsevier BV. - 0029-5493 .- 1872-759X. ; 240:5, s. 1229-1241
-
Tidskriftsartikel (refereegranskat)abstract
- Qualitative and quantitative determination of the release of low-volatile fission products and core materialsfrom molten oxidic corium was investigated in the EVAN project under the auspices of ISTC. Theexperiments carried out in a cold crucible with induction heating and RASPLAV test facility are described.The results are discussed in terms of reactor application; in particular, pool configuration, melt oxidationkinetics, critical influence of melt surface temperature and oxidation index on the fission productrelease rate, aerosol particle composition and size distribution. The relevance of measured high releaseof Sr from the molten pool for the reactor application is highlighted. Comparisons of the experimentaldata with those from the COLIMA CA-U3 test and the VERCORS tests, as well as with predictions fromIVTANTHERMO and GEMINI/NUCLEA codes are made. Recommendations for further investigations areproposed following the major observations and discussions.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Komlev, Andrei A., et al.
(författare)
-
Effect of the sequence of chemical transformations on the spatial segregation of components and formation of periclase-spinel nanopowders in the MgO–Fe2O3–H2O System
- 2016
-
Ingår i: Russian journal of applied chemistry. - : Maik Nauka-Interperiodica Publishing. - 1070-4272 .- 1608-3296. ; 89:12, s. 1932-1938
-
Tidskriftsartikel (refereegranskat)abstract
- Specific features of the process in which oxide nanopowders are formed in a hydrothermal treatment of coprecipitated magnesium and iron oxides were studied. It was shown that the rate at which oxide nanoparticles are formed increases when reagents structurally close to the final product are used. It was found that, with the hydrothermal treatment of coprecipitated magnesium and iron hydroxides at 450°C combined with the subsequent thermal treatment in air at temperatures of 400–600°C, it is possible to obtain a homogeneous mixture of nanocrystalline powders based on an iron-containing spinel phase and magnesium oxide.
|
|
| 8. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
| 9. |
|
|
| 10. |
- Sulatsky, A.A., et al.
(författare)
-
Molten corium interaction with oxidic sacrificial material of WER core catcher
- 2005
-
Ingår i: Proceedings of the American Nuclear Society. - 9781604236934 ; , s. 1238-1246
-
Konferensbidrag (refereegranskat)abstract
- The results of experimental studies on the interaction between the oxidic corium melt containing unoxidized zirconium and sacrificial materials of the VVER core catcher are presented. The phenomena of suboxidized corium interaction with sacrificial material have been determined and appropriate model has been developed.
|
|
