| 1. |
|
|
| 2. |
- Blomberg, Sara, et al.
(author)
-
2D and 3D imaging of the gas phase close to an operating model catalyst by planar laser induced fluorescence
- 2016
-
In: Journal of Physics: Condensed Matter. - : IOP Publishing. - 0953-8984 .- 1361-648X. ; 28:45
-
Research review (peer-reviewed)abstract
- In recent years, efforts have been made in catalysis related surface science studies to explore the possibilities to perform experiments at conditions closer to those of a technical catalyst, in particular at increased pressures. Techniques such as high pressure scanning tunneling/atomic force microscopy (HPSTM/AFM), near ambient pressure x-ray photoemission spectroscopy (NAPXPS), surface x-ray diffraction (SXRD) and polarization-modulation infrared reflection absorption spectroscopy (PM-IRAS) at semi-realistic conditions have been used to study the surface structure of model catalysts under reaction conditions, combined with simultaneous mass spectrometry (MS). These studies have provided an increased understanding of the surface dynamics and the structure of the active phase of surfaces and nano particles as a reaction occurs, providing novel information on the structure/activity relationship. However, the surface structure detected during the reaction is sensitive to the composition of the gas phase close to the catalyst surface. Therefore, the catalytic activity of the sample itself will act as a gas-source or gas-sink, and will affect the surface structure, which in turn may complicate the assignment of the active phase. For this reason, we have applied planar laser induced fluorescence (PLIF) to the gas phase in the vicinity of an active model catalysts. Our measurements demonstrate that the gas composition differs significantly close to the catalyst and at the position of the MS, which indeed should have a profound effect on the surface structure. However, PLIF applied to catalytic reactions presents several beneficial properties in addition to investigate the effect of the catalyst on the effective gas composition close to the model catalyst. The high spatial and temporal resolution of PLIF provides a unique tool to visualize the on-set of catalytic reactions and to compare different model catalysts in the same reactive environment. The technique can be applied to a large number of molecules thanks to the technical development of lasers and detectors over the last decades, and is a complementary and visual alternative to traditional MS to be used in environments difficult to asses with MS. In this article we will review general considerations when performing PLIF experiments, our experimental set-up for PLIF and discuss relevant examples of PLIF applied to catalysis.
|
|
| 3. |
|
|
| 4. |
- Blomberg, Sara, et al.
(author)
-
Combining synchrotron light with laser technology in catalysis research
- 2018
-
In: Journal of Synchrotron Radiation. - 1600-5775 .- 0909-0495. ; 25:5, s. 1389-1394
-
Journal article (peer-reviewed)abstract
- High-energy surface X-ray diffraction (HESXRD) provides surface structural information with high temporal resolution, facilitating the understanding of the surface dynamics and structure of the active phase of catalytic surfaces. The surface structure detected during the reaction is sensitive to the composition of the gas phase close to the catalyst surface, and the catalytic activity of the sample itself may affect the surface structure, which in turn may complicate the assignment of the active phase. For this reason, planar laser-induced fluorescence (PLIF) and HESXRD have been combined during the oxidation of CO over a Pd(100) crystal. PLIF complements the structural studies with an instantaneous two-dimensional image of the CO2 gas phase in the vicinity of the active model catalyst. Here the combined HESXRD and PLIF operandomeasurements of CO oxidation over Pd(100) are presented, allowing for an improved assignment of the correlation between sample structure and the CO2distribution above the sample surface with sub-second time resolution.
|
|
| 5. |
|
|
| 6. |
- Blomberg, Sara, et al.
(author)
-
Real-Time Gas-Phase Imaging over a Pd(110) Catalyst during CO Oxidation by Means of Planar Laser-Induced Fluorescence.
- 2015
-
In: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 5:4, s. 2028-2034
-
Journal article (peer-reviewed)abstract
- The gas composition surrounding a catalytic sample has direct impact on its surface structure, which is essential when in situ investigations of model catalysts are performed. Herein a study of the gas phase close to a Pd(110) surface during CO oxidation under semirealistic conditions is presented. Images of the gas phase, provided by planar laser-induced fluorescence, clearly visualize the formation of a boundary layer with a significantly lower CO partial pressure close to the catalytically active surface, in comparison to the overall concentration as detected by mass spectrometry. The CO partial pressure variation within the boundary layer will have a profound effect on the catalysts' surface structure and function and needs to be taken into consideration for in situ model catalysis studies.
|
|
| 7. |
- Blomberg, Sara, et al.
(author)
-
Strain Dependent Light-off Temperature in Catalysis Revealed by Planar Laser-Induced Fluorescence
- 2017
-
In: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 7:1, s. 110-114
-
Journal article (peer-reviewed)abstract
- Understanding how specific atom sites on metal surfaces lower the energy barrier for chemical reactions is vital in catalysis. Studies on simplified model systems have shown that atoms arranged as steps on the surface play an important role in catalytic reactions, but a direct comparison of how the light-off temperature is affected by the atom orientation on the step has not yet been possible due to methodological constraints. Here we report in situ spatially resolved measurements of the CO2 production over a cylindrical-shaped Pd catalyst and show that the light-off temperature at different parts of the crystal depends on the step orientation of the two types of steps (named A and B). Our finding is supported by density functional theory calculations, revealing that the steps, in contrast to what has been previously reported in the literature, are not directly involved in the reaction onset but have the role of releasing stress.
|
|
| 8. |
- Garcia-Martinez, Fernando, et al.
(author)
-
Catalytic oxidation of CO on a curved Pt(111) surface : simultaneous ignition at all facets through a transient CO-O complex.
- 2020
-
In: Angewandte Chemie International Edition. - : John Wiley & Sons. - 1433-7851 .- 1521-3773. ; 59:45, s. 20037-20043
-
Journal article (peer-reviewed)abstract
- The catalytic oxidation of carbon monoxide (CO) on transition metals, such as platinum (Pt), is commonly viewed as a sharp transition from the CO-inhibited surface to the active metal, covered with oxygen (O). However, we find that minor amounts of O are present in the CO-poisoned layer that explain why, surprisingly, CO desorbs at stepped and flat Pt crystal planes at once, regardless of the reaction conditions. Using near-ambient pressure X-ray photoemission and a curved Pt(111) crystal we probe the chemical composition at surfaces with variable step density during the CO oxidation reaction. The systematic analysis of carbon and oxygen core levels across the curved crystal reveals that, right before light-off, subsurface O builds up within (111) terraces. This is key to trigger the simultaneous ignition of the catalytic reaction at different Pt surfaces, as indicated by ab-initio theory: a CO-Pt-O complex is formed that equals the CO chemisorption energy at terraces and steps, leading to the abrupt desorption of poisoning CO from all crystal facets at the same temperature.
|
|
| 9. |
- Gustafson, Carl-Johan, et al.
(author)
-
Employing human keratinocytes cultured on macroporous gelatin spheres to treat full thickness-wounds : an in vivo study on athymic rats.
- 2007
-
In: Burns. - : Elsevier BV. - 0305-4179 .- 1879-1409. ; 33:6, s. 726-35
-
Journal article (peer-reviewed)abstract
- Providing cutaneous wounds with sufficient epidermis to prevent infections and fluid loss is one of the most challenging tasks associated with surgical treatment of burns. Recently, application of cultured keratinocytes in this context has allowed this challenge to be met without several of the limitations connected with the use of split-thickness skin grafts. The continuous development of this novel approach has now revealed that transplantation of cultured autologous keratinocytes as single-cell suspensions exhibits several advantages over the use of cultured epidermal grafts. However, a number of methodological problems remain to be solved, primarily with regards to the complexity of culturing these cells; loss of viability and other negative effects during their preparation and transportation; the relatively long period of time required following transplantation to obtain a sufficiently protective epidermis. In the present investigation we attempted to eliminate these limitations by culturing the keratinocytes on macroporous gelatin spheres. Accordingly, the efficacies of normal human keratinocytes in single-cell suspension or growing on macroporous gelatin spheres, as well as of split-thickness skin grafts in healing wounds on athymic rats were compared. Human keratinocytes were found to adhere and proliferate efficiently both on the surface and within the pores of such spheres. Transplantation of such cells adherent to the spheres resulted in significantly more rapid formation of a stratified epidermis than did transplantation of single-cell suspensions or spheres alone. Twenty-three days after transplantation, the epidermis formed from the cells bound to the spheres was not as thick as the epidermis on wounds covered with split-thickness skin grafts, but significantly thicker than on wounds to which single-cell suspensions, spheres alone or no transplant at all was applied. Furthermore, fluorescence in situ hybridisation revealed that the transplanted keratinocytes, both those adherent to gelatin spheres and those in single-cell suspension, were components of the newly formed epidermis. These findings indicate that application of biodegradable macroporous spheres may prove to be of considerable value in designing cell-based therapies for the treatment of acute and persistent wounds.
|
|
| 10. |
- Gustafson, Johan, et al.
(author)
-
One-dimensional PtO(2) at Pt steps : Formation and reaction with CO
- 2005
-
In: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 95:25, s. 1-4
-
Journal article (peer-reviewed)abstract
- Using core-level spectroscopy and density functional theory we show that a one-dimensional (1D) PtO(2) oxide structure forms at the steps of the Pt(332) surface after O(2) exposure. The 1D oxide is found to be stable in an oxygen pressure range, where bulk oxides are only metastable, and is therefore argued to be a precursor to the Pt oxidation. As an example of the consequences of such a precursor exclusively present at the steps, we investigate the reaction of CO with oxygen covered Pt(332). Albeit more strongly bound, the oxidic oxygen is found to react more easily with CO than oxygen chemisorbed on the Pt terraces.
|
|
