| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Arrhenius, Åsa, 1973, et al.
(författare)
-
Effects of antimycotics and fungicides to limnic microbial biofilms – a case study of the run-off from a golf course
- 2016
-
Ingår i: 4th Biofilm Workshop - Basis and application of biofilms to assess the effects of environmental change in aquatic ecosystems - Girona, 7-8 April 2016.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Antimycotic pharmaceuticals and fungicides are widely used for treating fungal infections in humans and animals and control pests in different areas and applications. They enter the aquatic environment either after passage through the body, or after being rinsed off from areas of application (skin, crops, farmland etc.). However, substantial knowledge gaps currently hamper a proper environmental risk assessment of the individual antimycotics and fungicides and their mixtures for marine and freshwater environments. Previously it has been shown that clotrimazole, a marine priority pollutant, affected sterol composition of marine microalgal communities already at 50 pmol/L which indicates effects at environmental concentrations. In this presentation we will discuss results from our work with limnic microbial biofilms and effects from antimycotics and fungicides individually and as mixtures. Endpoints include growth, pigment pattern, sterol composition, and species composition. Special focus will be on a case study from a Swedish golf course with a high usage of fungicides. Based on an analytical survey we prepared a worst-case-mixture study were we exposed biofilms in indoor microcosms for several days. Effects on growth and some shifts in microalgal species composition could be observed at concentrations relevant for the nearby golf area. Analysis of sterol composition and analytical confirmation of exposure concentrations are work in progress. The work is performed within the Swedish Formas-funded project “Aquatic Environmental Risk Assessment of Antimycotics”.
|
|
| 5. |
- Baveja, Prashant, 1985, et al.
(författare)
-
Impact of device parameters on thermal performance of high speed oxide confined 850 nm VCSELs
- 2012
-
Ingår i: IEEE Journal of Quantum Electronics. - 0018-9197 .- 1558-1713. ; 48:1, s. 17-26
-
Tidskriftsartikel (refereegranskat)abstract
- We study the impact of device parameters, such asinner-aperture diameter and cavity photon lifetime, on thermal rollover mechanisms in 850-nm, oxide-confined, vertical-cavity surface-emitting lasers (VCSELs) designed for high-speed operation. We perform measurements on four different VCSELs of different designs and use our empirical thermal model for calculating the power dissipated with increasing bias currents through various physical processes such as absorption within the cavity, carrier thermalization, carrier leakage, spontaneous carrier recombination, and Joule heating. When reducing the topmirror reflectivity to reduce internal optical absorption loss we find an increase of power dissipation due to carrier leakage. There is therefore a trade-ff between the powers dissipated owing to optical absorption and carrier leakage in the sense that overcompensating for optical absorption enhances carrier leakage (and vice versa). We further find that carrier leakage places the ultimate limit on the thermal performance for this entire class ofdevices. Our analysis yields useful design optimization strategies for mitigating the impact of carrier leakage and should thereby prove useful for the performance enhancement of 850-nm, highspeed, oxide-confined VCSELs.
|
|
| 6. |
- Baveja, P. P., et al.
(författare)
-
Assessment of VCSEL thermal rollover mechanisms from measurements and empirical modeling
- 2011
-
Ingår i: Optics Express. - 1094-4087 .- 1094-4087. ; 19:16, s. 15490-15505
-
Tidskriftsartikel (refereegranskat)abstract
- We use an empirical model together with experimental measurements for studying mechanisms contributing to thermal rollover in vertical-cavity surface-emitting lasers (VCSELs). The model is based on extraction of the temperature dependence of threshold current, internal quantum efficiency, internal optical loss, series resistance and thermal impedance from measurements of output power, voltage and lasing wavelength as a function of bias current over an ambient temperature range of 15-100 degrees C. We apply the model to an oxide-confined, 850-nm VCSEL, fabricated with a 9-mu m inner-aperture diameter and optimized for highspeed operation, and show for this specific device that power dissipation due to linear power dissipation (sum total of optical absorption, carrier thermalization, carrier leakage and spontaneous carrier recombination) exceeds power dissipation across the series resistance (quadratic power dissipation) at any ambient temperature and bias current. We further show that the dominant contributors to self-heating for this particular VCSEL are quadratic power dissipation, internal optical loss, and carrier leakage. A rapid reduction of the internal quantum efficiency at high bias currents (resulting in high temperatures) is identified as being the major cause of thermal rollover. Our method is applicable to any VCSEL and is useful for identifying the mechanisms limiting the thermal performance of the device and to formulate design strategies to ameliorate them.
|
|
| 7. |
- Baveja, P. P., et al.
(författare)
-
Impact of photon lifetime on thermal rollover in 850-nm high-speed VCSELs
- 2012
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9780819489197 ; 8276
-
Konferensbidrag (refereegranskat)abstract
- We present an empirical thermal model for VCSELs based on extraction of temperature dependence of macroscopic VCSEL parameters from CW measurements. We apply our model to two, oxide-confined, 850-nm VCSELs, fabricated with a 9-mu m inner-aperture diameter and optimized for high-speed operation. We demonstrate that for both these devices, the power dissipation due to linear heat sources dominates the total self-heating. We further show that reducing photon lifetime down to 2 ps drastically reduces absorption heating and improves device static performance by delaying the onset of thermal rollover. The new thermal model can identify the mechanisms limiting the thermal performance and help in formulating the design strategies to ameliorate them.
|
|
| 8. |
|
|
| 9. |
- Berglund, Erik, et al.
(författare)
-
Multidisciplinary Intervention and Acceptance and Commitment Therapy for Return-to-Work and Increased Employability among Patients with Mental Illness and/or Chronic Pain : A Randomized Controlled Trial
- 2018
-
Ingår i: International Journal of Environmental Research and Public Health. - : MDPI AG. - 1661-7827 .- 1660-4601. ; 15:11
-
Tidskriftsartikel (refereegranskat)abstract
- Background: People on long-term sick leave often have a long-lasting process back to work, where the individuals may be in multiple and recurrent states; i.e., receiving different social security benefits or working, and over time they may shift between these states. The purpose of this study was to evaluate the effects of two vocational rehabilitation programs, compared to a control, on return-to-work (RTW) or increased employability in patients on long-term sick leave due to mental illness and/or chronic pain. Methods: In this randomized controlled study, 427 women and men were allocated to either (1) multidisciplinary team management, i.e., multidisciplinary assessments and individual rehabilitation management, (2) acceptance and commitment therapy (ACT), or (3) control. A positive outcome was defined as RTW or increased employability. The outcome was considered negative if the (part-time) wage was reduced or ceased, or if there was an indication of decreased employability. The outcome was measured one year after entry in the project and analyzed using binary and multinomial logistic regressions. Results: Participants in the multidisciplinary team group reported having RTW odds ratio (OR) 3.31 (95% CI 1.39-7.87) compared to the control group in adjusted models. Participants in the ACT group reported having increased employability OR 3.22 (95% CI 1.13-9.15) compared to the control group in adjusted models. Conclusions: This study of vocational rehabilitation in mainly female patients on long-term sick leave due to mental illness and/or chronic pain suggests that multidisciplinary team assessments and individually adapted rehabilitation interventions increased RTW and employability. Solely receiving the ACT intervention also increased employability.
|
|
| 10. |
- Bergmann, Michael Alexander, 1989, et al.
(författare)
-
Towards ultraviolet and blue microcavity lasers
- 2018
-
Ingår i: Northen Optics and Photonics conference. - 9789163964886 ; 2018
-
Konferensbidrag (refereegranskat)abstract
- The development of III-nitride-based (Al,Ga,In(N)) microcavity lasers is a challenging task. Significant progress in recent years has resulted in realizations of electrically pumped devices with optical output power in the mW-range and with threshold current densities below 20 kA/cm2. However, to become practical, the lifetime and power conversion efficiency of these devices must be improved. Among the challenges are achieving transverse optical mode confinement, highreflectivity mirrors and control over the resonator length. We will highlight our theoretical work on transverse optical mode confinement, emphasising the overwhelming risk of ending up with an optically anti-guided cavity, and its consequences such as very high optical losses that easily could double the threshold gain for lasing. We will show some anti-guided cavities with reasonable threshold gain and built-in modal discrimination. However, all anti-guided cavities are very sensitive to temperature effects and small structural changes in the cavity caused by fabrication imperfections. We have explored electrically conductive distributed Bragg reflectors (DBRs) in both AlN/GaN and ZnO/GaN. The AlN/GaN DBRs were grown with different strain-compensating interlayers, and the DBR without interlayers had the lowest vertical resistivity with a specific series resistance of 0.044 cmfor eight DBRpairs. In the ZnO/GaN DBR, the measured resistance was dominated by lateral and contact contributions, setting a lower measurable limit of ~10 for three DBR-pairs. Numerical simulations show the importance of having in-plane strained layers in the ZnO/GaN DBR, since that leads to cancellation of the spontaneous and piezoelectric polarization. This results in a dramatically reduced vertical resistance, potentially three orders of magnitude lower than what could be measured. cm An alternative to an epitaxially grown DBR is a dielectric DBR, which offers high reflectivity over a broader wavelength range, relaxing the requirements on resonator length control. To deposit a dielectric DBR on the bottom side of the cavity, the sample must first be bonded to a carrier wafer before the substrate can be removed. We used thermocompression gold-gold bonding to successfully bond the laser structure to a Si carrier wafer. The subsequent substrate removal is a challenging process due to the chemical inertness of the III-nitride-based materials. A doping-dependent electrochemical etch technique was used, which allows for the selective removal of a sacrificial (n-doped) layer between the cavity and the substrate. This resulted in nm-precise cavity lift-off with a low root-mean-square surface roughness down to 0.3 nm. Thus, the process is suitable for the fabrication of high-quality optical devices such as microcavity lasers. In addition, the technique offers a new alternative to create III-nitridebased optical resonators, mechanical resonators, thin film LEDs and transistors.
|
|
