| 1. |
|
|
| 2. |
- Taghavi, Hamidreza, 1981, et al.
(författare)
-
Technical design of a new bone conduction implant (BCI) system
- 2015
-
Ingår i: International Journal of Audiology. - : Informa UK Limited. - 1499-2027 .- 1708-8186. ; 54:10, s. 736-744
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: The objective of this study is to describe the technical design and verify the technical performance of a new bone conduction implant (BCI) system. Design: The BCI consists of an external audio processor and an implanted unit called the bridging bone conductor. These two units use an inductive link to communicate with each other through the intact skin in order to drive an implanted transducer. Study sample: In this study, the design of the full BCI system has been described and verified on a skull simulator and on real patients. Results: It was found that the maximum output force (peak 107 dB re 1 N) of the BCI is robust for skin thickness range of 2-8 mm and that the total harmonic distortion is below 8% in the speech frequency range for 70 dB input sound pressure level. The current consumption is 7.5 mA, which corresponds to 5-7 days use with a single battery. Conclusions: This study shows that the BCI is a robust design that gives a sufficiently high output and an excellent sound quality for the hearing rehabilitation of indicated patients.
|
|
| 3. |
- Ahmed, Fareed, et al.
(författare)
-
Manufacturing Poly(3,4-Ethylenedioxythiophene) Electrocatalytic Sheets for Large-Scale H2O2 Production
- 2022
-
Ingår i: Advanced Sustainable Systems. - : John Wiley and Sons Inc. - 2366-7486. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- Producing thick films of conducting polymers by a low-cost manufacturing technique would enable new applications. However, removing huge solvent volume from diluted suspension or dispersion (1–3 wt%) in which conducting polymers are typically obtained is a true manufacturing challenge. In this work, a procedure is proposed to quickly remove water from the conducting polymer poly(3,4-ethylenedioxythiophene:poly(4-styrene sulfonate) (PEDOT:PSS) suspension. The PEDOT:PSS suspension is first flocculated with 1 m H2SO4 transforming PEDOT nanoparticles (≈50–500 nm) into soft microparticles. A filtration process inspired by pulp dewatering in a paper machine on a wire mesh with apertures dimension between 60 µm and 0.5 mm leads to thick free-standing films (≈0.5 mm). Wire mesh clogging that hinders dewatering (known as dead-end filtration) is overcome by adding to the flocculated PEDOT:PSS dispersion carbon fibers that aggregate and form efficient water channels. Moreover, this enables fast formation of thick layers under simple atmospheric pressure filtration, thus making the process truly scalable. Thick freestanding PEDOT films thus obtained are used as electrocatalysts for efficient reduction of oxygen to hydrogen peroxide, a promising green chemical and fuel. The inhomogeneity of the films does not affect their electrochemical function. © 2021 The Authors.
|
|
| 4. |
- Aylott, Nicholas, et al.
(författare)
-
Politiska partier
- 2005
-
Ingår i: EU och Sverige. - Lund : Studentlitteratur. - 9147075635 ; , s. 58-78
-
Samlingsverk (redaktörskap) (övrigt vetenskapligt/konstnärligt)
|
|
| 5. |
- Belaineh, Dagmawi, et al.
(författare)
-
Controlling the Organization of PEDOT:PSS on Cellulose Structures
- 2019
-
Ingår i: ACS APPLIED POLYMER MATERIALS. - : AMER CHEMICAL SOC. - 2637-6105. ; 1:9, s. 2342-2351
-
Tidskriftsartikel (refereegranskat)abstract
- Composites of biopolymers and conducting polymers are emerging as promising candidates for a green technological future and are actively being explored in various applications, such as in energy storage, bioelectronics, and thermoelectrics. While the device characteristics of these composites have been actively investigated, there is limited knowledge concerning the fundamental intracomponent interactions and the modes of molecular structuring. Here, by use of cellulose and poly(3,4-ethylene-dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), it is shown that the chemical and structural makeup of the surfaces of the composite components are critical factors that determine the materials organization at relevant dimensions. AFM, TEM, and GIVVAXS measurements show that when mixed with cellulose nanofibrils, PEDOT:PSS organizes into continuous nanosized beadlike structures with an average diameter of 13 nm on the nanofibrils. In contrast, when PEDOT:PSS is blended with molecular cellulose, a phase-segregated conducting network morphology is reached, with a distinctly relatively lower electric conductivity. These results provide insight into the mechanisms of PEDOT:PSS crystallization and may have significant implications for the design of conducting biopolymer composites for a vast array of applications.
|
|
| 6. |
- Belaineh Yilma, Dagmawi, et al.
(författare)
-
Printable carbon-based supercapacitors reinforced with cellulose and conductive polymers
- 2022
-
Ingår i: Journal of Energy Storage. - : Elsevier Ltd. - 2352-152X .- 2352-1538. ; 50
-
Tidskriftsartikel (refereegranskat)abstract
- Sustainable electrical energy storage is one of the most important scientific endeavors of this century. Battery and supercapacitor technologies are here crucial, but typically the current state of the art suffers from either lack of large-scale production possibilities, sustainability or insufficient performance and hence cannot match growing demands in society. Paper and cellulosic materials are mature scalable templates for industrial roll-to-roll production. Organic materials, such as conducting polymers, and carbon derivatives are materials that can be synthesized or derived from abundant sources. Here, we report the combination of cellulose, PEDOT:PSS and carbon derivatives for bulk supercapacitor electrodes adapted for printed electronics. Cellulose provides a mesoscopic mesh for the organization of the active ingredients. Furthermore, the PEDOT:PSS in combination with carbon provides superior device characteristics when comparing to the previously standard combination of activated carbon and carbon black. PEDOT:PSS acts as a mixed ion-electron conducting glue, which physically binds activated carbon particles together, while at the same time facilitating swift transport of both electrons and ions. A surprisingly small amount (10%) of PEDOT:PSS is needed to achieve an optimal performance. This work shows that cellulose added to PEDOT:PSS-carbon enables high-performing, mechanically stable, printed supercapacitor electrodes using a combination of printing methods.
|
|
| 7. |
- Breijaert, T. C., et al.
(författare)
-
Self-assembly of ferria – nanocellulose composite fibres
- 2022
-
Ingår i: Carbohydrate Polymers. - : Elsevier Ltd. - 0144-8617 .- 1879-1344. ; 291
-
Tidskriftsartikel (refereegranskat)abstract
- An environmentally benign synthesis of a magnetically responsive carboxymethylated cellulose nanofibril-based material is reported. Applied experimental conditions lead to the in-situ formation of magnetite nanoparticles with primary particle sizes of 2.0–4.0 nm or secondary particles of 3.6–16.4 nm depending on whether nucleation occurred between individual carboxymethylated cellulose nanofibrils, or on exposed fibril surfaces. The increase in magnetite particle size on the cellulose fibril surfaces was attributed to Ostwald ripening, while the small particles formed within the carboxymethyl cellulose aggregates were presumably due to steric interactions. The magnetite nanoparticles were capable of coordinating to carboxymethylated cellulose nanofibrils to form large “fibre-like” assemblies. The confinement of small particles within aggregates of reductive cellulose molecules was most likely responsible for excellent conservation of magnetic characteristics on storage of this material. The possibility for using the material in drug delivery applications with release rate controlled by daylight illumination is presented. © 2022 The Author(s)
|
|
| 8. |
- Brooke, Robert, 1989-, et al.
(författare)
-
Nanocellulose and PEDOT:PSS composites and their applications
- 2023
-
Ingår i: Polymer Reviews. - : Taylor and Francis Ltd.. - 1558-3724 .- 1558-3716. ; :2, s. 437-
-
Tidskriftsartikel (refereegranskat)abstract
- The need for achieving sustainable technologies has encouraged research on renewable and biodegradable materials for novel products that are clean, green, and environmentally friendly. Nanocellulose (NC) has many attractive properties such as high mechanical strength and flexibility, large specific surface area, in addition to possessing good wet stability and resistance to tough chemical environments. NC has also been shown to easily integrate with other materials to form composites. By combining it with conductive and electroactive materials, many of the advantageous properties of NC can be transferred to the resulting composites. Conductive polymers, in particular poly(3,4-ethylenedioxythiophene:poly(styrene sulfonate) (PEDOT:PSS), have been successfully combined with cellulose derivatives where suspensions of NC particles and colloids of PEDOT:PSS are made to interact at a molecular level. Alternatively, different polymerization techniques have been used to coat the cellulose fibrils. When processed in liquid form, the resulting mixture can be used as a conductive ink. This review outlines the preparation of NC/PEDOT:PSS composites and their fabrication in the form of electronic nanopapers, filaments, and conductive aerogels. We also discuss the molecular interaction between NC and PEDOT:PSS and the factors that affect the bonding properties. Finally, we address their potential applications in energy storage and harvesting, sensors, actuators, and bioelectronics. © 2022 The Author(s).
|
|
| 9. |
- Burgaz, A., et al.
(författare)
-
Confirmed hypertension and plasma 25(OH)D concentrations amongst elderly men
- 2011
-
Ingår i: Journal of Internal Medicine. - : Wiley. - 0954-6820 .- 1365-2796. ; 269:2, s. 211-218
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives. The results of experimental studies suggest that vitamin D deficiency activates the renin-angiotensin system and predisposes to hypertension. Results of previous epidemiological studies investigating the association between 25-hydroxyvitamin D [25(OH)D] status and hypertension have not been consistent, perhaps because of their sole reliance on office blood pressure (BP) measurements leading to some misclassification of hypertension status. No previous studies have examined the association between 25(OH)D status and confirmed hypertension assessed with both office and 24-h BP measurements. Design. In this cross-sectional study, we investigated 833 Caucasian men, aged 71 +/- 0.6 years, to determine the association between plasma 25(OH)D concentrations, measured with high-pressure liquid chromatography mass spectrometry, and the prevalence of hypertension. We used both supine office and 24-h BP measurements for classifying participants as normotensive or confirmed hypertensive; participants with inconsistent classifications were excluded. Results. In a multivariable adjusted logistic regression model, men with 25(OH)D concentrations < 37.5 nmol L-1 had a 3-fold higher prevalence of confirmed hypertension compared to those with >= 37.5 nmol L-1 25(OH)D (odds ratio = 3.3, 95% CI: 1.0-11.0). Conclusions. Our results show that low plasma 25(OH)D concentration is associated with a higher prevalence of confirmed hypertension.
|
|
| 10. |
- Carlsson, Allan, et al.
(författare)
-
Evaluation of steerable filter for detection of fibres in flowing suspensions
- 2011
-
Ingår i: Experiments in Fluids. - : Springer Science and Business Media LLC. - 0723-4864 .- 1432-1114. ; 51:4, s. 987-996
-
Tidskriftsartikel (refereegranskat)abstract
- Steerable filters are concluded to be useful in order to determine the orientation of fibers captured in digital images. The fiber orientation is a key variable in the study of flowing fiber suspensions. Here, digital image analysis based on a filter within the class of steerable filters is evaluated for suitability of finding the position and orientation of fibers suspended in flowing suspensions. In sharp images with small noise levels, the steerable filter succeeds in determining the orientation of artificially generated fibers with well-defined angles. The influence of reduced image quality on the orientation has been quantified. The effect of unsharpness and noise is studied and the results show that the error in orientation is less than 1° for moderate levels. Images from two flow cases, one laminar shear flow and one turbulent, are also analyzed. The fiber orientation distribution is determined in the flow-vorticity plane. For the laminar case a comparison is made to a robust, but computationally more expensive, method involving convolutions with an oriented elliptic filter. A good agreement is found when comparing the resulting fiber orientation distributions obtained with the two methods. For the turbulent case, it is demonstrated that correct results are obtained and that the method can handle overlapping fibers.
|
|
