| 1. |
|
|
| 2. |
- Akiyama, Kazunori, et al.
(författare)
-
The persistent shadow of the supermassive black hole of M 87: I. Observations, calibration, imaging, and analysis*
- 2024
-
Ingår i: Astronomy and Astrophysics. - 0004-6361 .- 1432-0746. ; 681
-
Tidskriftsartikel (refereegranskat)abstract
- In April 2019, the Event Horizon Telescope (EHT) Collaboration reported the first-ever event-horizon-scale images of a black hole, resolving the central compact radio source in the giant elliptical galaxy M 87. These images reveal a ring with a southerly brightness distribution and a diameter of ∼42 μas, consistent with the predicted size and shape of a shadow produced by the gravitationally lensed emission around a supermassive black hole. These results were obtained as part of the April 2017 EHT observation campaign, using a global very long baseline interferometric radio array operating at a wavelength of 1.3 mm. Here, we present results based on the second EHT observing campaign, taking place in April 2018 with an improved array, wider frequency coverage, and increased bandwidth. In particular, the additional baselines provided by the Greenland telescope improved the coverage of the array. Multiyear EHT observations provide independent snapshots of the horizon-scale emission, allowing us to confirm the persistence, size, and shape of the black hole shadow, and constrain the intrinsic structural variability of the accretion flow. We have confirmed the presence of an asymmetric ring structure, brighter in the southwest, with a median diameter of 43.3-3.1+1.5 μas. The diameter of the 2018 ring is remarkably consistent with the diameter obtained from the previous 2017 observations. On the other hand, the position angle of the brightness asymmetry in 2018 is shifted by about 30 relative to 2017. The perennial persistence of the ring and its diameter robustly support the interpretation that the ring is formed by lensed emission surrounding a Kerr black hole with a mass ∼6.5× 109M. The significant change in the ring brightness asymmetry implies a spin axis that is more consistent with the position angle of the large-scale jet.
|
|
| 3. |
- Kim, Jae-Young, et al.
(författare)
-
Event Horizon Telescope imaging of the archetypal blazar 3C 279 at an extreme 20 microarcsecond resolution
- 2020
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 640
-
Tidskriftsartikel (refereegranskat)abstract
- 3C 279 is an archetypal blazar with a prominent radio jet that show broadband flux density variability across the entire electromagnetic spectrum. We use an ultra-high angular resolution technique - global Very Long Baseline Interferometry (VLBI) at 1.3mm (230 GHz) - to resolve the innermost jet of 3C 279 in order to study its fine-scale morphology close to the jet base where highly variable-ray emission is thought to originate, according to various models. The source was observed during four days in April 2017 with the Event Horizon Telescope at 230 GHz, including the phased Atacama Large Millimeter/submillimeter Array, at an angular resolution of ∼20 μas (at a redshift of z = 0:536 this corresponds to ∼0:13 pc ∼ 1700 Schwarzschild radii with a black hole mass MBH = 8 × 108 M⊙). Imaging and model-fitting techniques were applied to the data to parameterize the fine-scale source structure and its variation.We find a multicomponent inner jet morphology with the northernmost component elongated perpendicular to the direction of the jet, as imaged at longer wavelengths. The elongated nuclear structure is consistent on all four observing days and across diffierent imaging methods and model-fitting techniques, and therefore appears robust. Owing to its compactness and brightness, we associate the northern nuclear structure as the VLBI "core". This morphology can be interpreted as either a broad resolved jet base or a spatially bent jet.We also find significant day-to-day variations in the closure phases, which appear most pronounced on the triangles with the longest baselines. Our analysis shows that this variation is related to a systematic change of the source structure. Two inner jet components move non-radially at apparent speeds of ∼15 c and ∼20 c (∼1:3 and ∼1:7 μas day-1, respectively), which more strongly supports the scenario of traveling shocks or instabilities in a bent, possibly rotating jet. The observed apparent speeds are also coincident with the 3C 279 large-scale jet kinematics observed at longer (cm) wavelengths, suggesting no significant jet acceleration between the 1.3mm core and the outer jet. The intrinsic brightness temperature of the jet components are ≤1010 K, a magnitude or more lower than typical values seen at ≥7mm wavelengths. The low brightness temperature and morphological complexity suggest that the core region of 3C 279 becomes optically thin at short (mm) wavelengths.
|
|
| 4. |
- Akiyama, Kazunori, et al.
(författare)
-
First Sagittarius A* Event Horizon Telescope Results. II. EHT and Multiwavelength Observations, Data Processing, and Calibration
- 2022
-
Ingår i: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 930:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present Event Horizon Telescope (EHT) 1.3 mm measurements of the radio source located at the position of the supermassive black hole Sagittarius A* (Sgr A*), collected during the 2017 April 5-11 campaign. The observations were carried out with eight facilities at six locations across the globe. Novel calibration methods are employed to account for Sgr A*'s flux variability. The majority of the 1.3 mm emission arises from horizon scales, where intrinsic structural source variability is detected on timescales of minutes to hours. The effects of interstellar scattering on the image and its variability are found to be subdominant to intrinsic source structure. The calibrated visibility amplitudes, particularly the locations of the visibility minima, are broadly consistent with a blurred ring with a diameter of similar to 50 mu as, as determined in later works in this series. Contemporaneous multiwavelength monitoring of Sgr A* was performed at 22, 43, and 86 GHz and at near-infrared and X-ray wavelengths. Several X-ray flares from Sgr A* are detected by Chandra, one at low significance jointly with Swift on 2017 April 7 and the other at higher significance jointly with NuSTAR on 2017 April 11. The brighter April 11 flare is not observed simultaneously by the EHT but is followed by a significant increase in millimeter flux variability immediately after the X-ray outburst, indicating a likely connection in the emission physics near the event horizon. We compare Sgr A*'s broadband flux during the EHT campaign to its historical spectral energy distribution and find that both the quiescent emission and flare emission are consistent with its long-term behavior.
|
|
| 5. |
- Gubicza, J., et al.
(författare)
-
Evolution of microstructure and hardness in Hf 25 Nb 25 Ti 25 Zr 25 high-entropy alloy during high-pressure torsion
- 2019
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier. - 0925-8388 .- 1873-4669. ; 788, s. 318-328
-
Tidskriftsartikel (refereegranskat)abstract
- A four-component equimolar high-entropy alloy (HEA) with the composition of HfNbTiZr and body-centered cubic (bcc) structure was processed by HPT at RT. The evolution of the dislocation density, the grain size and the hardness was monitored along the HPT-processed disk radius for different numbers of turns between ¼ and 20. It was found that most of the increase of the dislocation density and the refinement of the grain structure occurred up to the shear strain of ∼40. Between the strains of ∼40 and ∼700, only a slight grain size reduction was observed. The saturated dislocation density and grain size were ∼2.1 × 10 16 m −2 and ∼30 nm, respectively. The saturation in hardness was obtained at ∼4450 MPa. These values were similar to the parameters determined in the literature for five-component HEAs processed by HPT. The analysis confirmed that the main component in the strength was given by the friction stress in the HPT-processed bcc HfNbTiZr HEA. It was also revealed that the contribution of the high dislocation density to the strength was significantly higher than the effect of the small grain size.
|
|
| 6. |
- Han, Yanting, et al.
(författare)
-
Green preparation of antibacterial shape memory foam based on bamboo cellulose nanofibril and waterborne polyurethane for adaptive relief of plantar pressure
- 2024
-
Ingår i: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 256
-
Tidskriftsartikel (refereegranskat)abstract
- This study developed an aqueous solution blending and freeze-drying method to prepare an antibacterial shape memory foam (WPPU/CNF) based on waterborne PHMG-polyurethane and cellulose nanofibers derived from bamboo in response to the increasing demand for environmentally friendly, energy conserving, and multifunctional foams. The obtained WPPU/CNF composite foam has a highly porous network structure with well-dispersed CNFs forming hydrogen bonds with the WPPU matrix, which results in a stable and rigid cell skeleton with enhanced mechanical properties (80 KPa) and anti-abrasion ability. The presence of guanidine in the polyurethane chain endowed the WPPU/CNF composite foam with an instinctive and sustained antibacterial ability against Escherichia coli and Staphylococcus aureus. The WPPU/CNF composite foam exhibited a water-sensitive shape memory function in a cyclic shape memory program because of the chemomechanical adaptability of the hydrogen-bonded network of CNFs in the elastomer matrix. The shape-fixation ratio for local compression reached 95 %, and the shape-recovery rate reached 100 %. This allows the WPPU/CNF pad prototype to reversibly adjust the undulation height to adapt to plantar ulcers, which can reduce the local plantar pressure by 60 %. This study provides an environmentally friendly strategy for cellulose-based composite fabrication and enriches the design and application of intelligent foam devices.
|
|
| 7. |
- Hong, Feng, et al.
(författare)
-
Bacterial cellulose production from cotton-based waste textiles : enzymatic saccharification enhanced by ionic liquid pretreatment
- 2012
-
Ingår i: Bioresource Technology. - Oxford : Elsevier. - 0960-8524 .- 1873-2976. ; 104, s. 503-508
-
Tidskriftsartikel (refereegranskat)abstract
- Cotton-based waste textiles were explored as alternative feedstock for production of bacterial cellulose (BC) by Gluconacetobacter xylinus. The cellulosic fabrics were treated with the ionic liquid (IL) 1-allyl-3-methylimidazolium chloride ([AMIM]Cl). [AMIM]Cl caused 25% inactivation of cellulase activity at a concentration as low as of 0.02 g/mL and decreased BC production during fermentation when present in concentrations higher than 0.0005 g/mL. Therefore, removal of residual IL by washing with hot water was highly beneficial to enzymatic saccharification as well as BC production. IL-treated fabrics exhibited a 5-7-fold higher enzymatic hydrolysis rate and gave a seven times larger yield of fermentable sugars than untreated fabrics. BC from cotton cloth hydrolysate was obtained at an yield of 10.8 g/L which was 83% higher than that from the culture grown on glucose-based medium. The BC from G. xylinus grown on IL-treated fabric hydrolysate had a 79% higher tensile strength than BC from glucose-based culture medium which suggests that waste cotton pretreated with [AMIM]Cl has potential to serve as a high-quality carbon source for BC production.
|
|
| 8. |
- Jiang, Jiajun, et al.
(författare)
-
Hydroprinted Liquid-Alloy-Based Morphing Electronics for Fast-Growing/Tender Plants : From Physiology Monitoring to Habit Manipulation
- 2020
-
Ingår i: Small. - : WILEY-V C H VERLAG GMBH. - 1613-6810 .- 1613-6829. ; 16:39
-
Tidskriftsartikel (refereegranskat)abstract
- Monitoring physiological signals and manipulating growth habits of living plants in real time are important for botany research, biohybrid plant robots, and precision agriculture. Although emerging epidermal electronics that can conveniently acquire vital signals of living organisms exhibit a high potential for such scenarios, it is a significant challenge to adapt such devices for plants, because they are fragile and usually have complex surfaces that can change significantly during rapid growth. A gentle fabrication process is critical in order to employ compliant electronic systems to adapt to this highly dynamic situation. In this study, a hydroprinted liquid-alloy-based morphing electronics (LAME) process is employed for fast-growing plants that will sense physiological signals and even function as a biohybrid to determine plant behavior on demand. Besides various surfaces of inorganic targeting substrates, pinning liquid alloy circuits onto the complex plant epidermis is enhanced by introducing high-surface-energy liquid. Functionally, the new developed LAME can be used to monitor leaf moisture content and length, and manipulate leaf and bean sprout orientation. This study lays the foundation for a new form of morphing electronics for botany or biohybrid plant robots, potentially impacting the next generation of precision agriculture and smart hybrid robots.
|
|
| 9. |
- Jin, Yanghao, et al.
(författare)
-
Carbon and H-2 recoveries from plastic waste by using a metal-free porous biocarbon catalyst
- 2023
-
Ingår i: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 404
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon and H2 recoveries from plastic waste enable high value-added utilizations of plastic waste while mini-mizing its GHG emissions. The objective of this study is to explore the use of a metal-free biocarbon catalyst for waste plastic pyrolysis and in-line catalytic cracking to produce H2-rich gases and carbon. The results show that the biocarbon catalyst exhibits a good catalytic effect and stability for various plastic wastes. Increasing the C/P ratio from 0 to 2, induce an increase in the conversion rate of C and H in plastics to carbon and H2 from 57.1% to 68.7%, and from 22.7% to 53.5%, respectively. Furthermore, a carbon yield as high as 580.6 mg/gplastic and an H2 yield as high as 68.6 mg/gplastic can be obtained. The hierarchical porous structure with tortuous channels of biocarbon extends the residence time of pyrolysis volatiles in the high-temperature catalytic region and thereby significantly promotes cracking reactions.
|
|
| 10. |
- Li, Peng, et al.
(författare)
-
Transcriptional reactivation of OTX2, RX1 and SIX3 during reprogramming contributes to the generation of RPE cells from human iPSCs
- 2016
-
Ingår i: International Journal of Biological Sciences. - : Ivyspring International Publisher. - 1449-2288. ; 12:5, s. 505-517
-
Tidskriftsartikel (refereegranskat)abstract
- Directed differentiation of human induced pluripotent stem cells (iPSCs) into retinal pigmented epithelium (RPE) holds great promise in cell replacement therapy for patients suffering from degenerative eye diseases, including age-related macular degeneration (AMD). In this study, we generated iPSCs from human dermal fibroblasts (HDFs) by electroporation with episomal plasmid vectors encoding OCT4, SOX2, KLF4, L-MYC together with p53 suppression. Intriguingly, cell reprogramming resulted in a metastable transcriptional activation and selective demethylation of neural and retinal specification-associated genes, such as OTX2, RX1 and SIX3. In contrast, RPE progenitor genes were transcriptionally silent in HDFs and descendant iPSCs. Overexpression of OCT4 and SOX2 directly stimulated the expression of OTX2, RX1 and SIX3 in HDFs and iPSCs. Luciferase and chromatin immunoprecipitation (ChIP) assays further identified an OCT4- and two SOX2-binding sites located in the proximal promoter of OTX2. Histone acetylation and methylation on the local promoter also participated in the reactivation of OTX2. The transcriptional conversion of RX1 and SIX3 genes partially attributed to DNA demethylation. Subsequently, iPSCs were induced into the RPE cells displaying the characteristics of polygonal shapes and pigments, and expressing typical RPE cell markers. Taken together, our results establish readily efficient and safe protocols to produce iPSCs and iPSC-derived RPE cells, and underline that the reactivation of anterior neural transcription factor OTX2, eye field transcription factor RX1 and SIX3 in iPSCs is a feature of pluripotency acquisition and predetermines the potential of RPE differentiation.
|
|
