1. |
|
|
2. |
- Berlin, Cecilia, 1981, et al.
(författare)
-
National Standard vs. Corporate-Internal Ergonomics Evaluation - an Industrial Case Study
- 2008
-
Ingår i: The 40th annual Nordic Ergonomic Society Conference, NES 2008, Reykjavík, Iceland, August 11-13.
-
Konferensbidrag (refereegranskat)abstract
- In Sweden, industrial corporations are required to actively monitor and improve the working environment for their employees according to the provision AFS 1998:1, a document that offers guidelines for maintaining a healthy physical working environment, chiefly by ensuring healthy working postures. This provision was purposely formulated in a very general, nonspecific manner in order to be relevant for a large variety of industries.At certain industrial corporations, corporate-internal procedures for evaluating and monitoring the ergonomic status of the workplace have been developed, usually in order to takeconsideration of the specific conditions of that industrial application. The protocol, method,execution and presentation of the evaluation results may vary. Also, the decision regarding which personnel should carry out the evaluation becomes a poignant question. In this article, which describes a Swedish industrial case study in the automotive sector, a corporate-internal method with a highly specified input protocol was used to evaluate theergonomic status of a production line. At the time, the evaluation was carried out by factory personnel with specific training in using the method. Months later, the same factory segment was re-evaluated by two professional ergonomists from an occupational health service, thistime using the AFS 1998:1 provision as a basis.The article makes an attempt to compare the two methods, finding some similarities and also some interesting differences. However, the main research questions that arise from this work concern the difficulties of choosing the right evaluation method for a large, complex industrialsystem; not only do different evaluation methods tell us different things at different levels of detail, but they also require very different competencies from the persons who perform the evaluation.
|
|
3. |
- Bertilsson, Erik, et al.
(författare)
-
Creation of the IMMA manikin with consideration of anthropometric diversity
- 2011
-
Ingår i: 21st International Conference on Production Research: Innovation in Product and Production, ICPR 2011; Stuttgart; Germany; 31 July 2011 through 4 August 2011. - : Fraunhofer Verlag. - 9783839602935 - 3839602939
-
Konferensbidrag (refereegranskat)abstract
- Digital human modelling (DHM) systems are used to simulate production processes and analyse the human-machine interaction, particularly at early development stages. Consideration of anthropometric variation is central in DHM simulations due to the necessity of ensuring intended accommodation levels. This paper describes the process of how digital human models are created and defined within the IMMA software. The process begins with the definition of a number of key measurements, which acts as the basis for the definition of several boundary manikins using a confidence ellipsoid methodology. These manikins represents the appropriate confidence region and hence the anthropometric diversity. Key measurements are then entered into regression equations to define the complete set of measurements for each manikin. These measurements are based on the appropriate ISO-standard. Finally, measurements are used to define the size and alignment of each segment in the biomechanical model of the manikin. The manikins are then used to automatically simulate and analyse human-machine interaction.
|
|
4. |
- Blomé, Mikael, et al.
(författare)
-
Identifying time-consuming human modelling tool activities
- 2006
-
Ingår i: SAE Technical Papers. - 400 Commonwealth Drive, Warrendale, PA, United States : SAE International. - 0148-7191 .- 2688-3627.
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study was to identify and measure time-consuming human modelling tool activities. Five human modelling tool users at Volvo were observed for five days each. The results showed a wide distribution of both indirect and direct working tasks, as well as non-value added tasks such as waiting time. Most of the activities identified appear to be necessary to perform human modelling simulations of high quality. However, the time distribution could be questioned to some extent. There are many activities associated with communication, including a variety of contacts and meetings, where there appears to be potential to increase efficiency.
|
|
5. |
- Blomé, Mikael, et al.
(författare)
-
Structured time observation of human modelling tool users' activites.
- 2006
-
Ingår i: In: Proceedings of 16th Triennial World Congress on Ergonomics, International Ergonomics Association, 2006, July 10-14, Maastricht, The Netherlands..
-
Konferensbidrag (refereegranskat)abstract
- Most statements regarding human modeling tools efficiency are based on perceived time. No structured timeobservation of task activities performed by a simulation engineers working with the tools are previous performed.The aim of the study is to identify digital human modelling tool users’ activates and measure the time distributionof the activities. Furthermore, measured time distribution is compared with users perceived time distribution.Five simulation engineers at Volvo were observed for five days each. The simulation engineers’ activities can becategorised in twelve groups. The direct value added work and the indirect value added work important for a newintroduced tool were of similar size as direct value added work for a vehicle disassembly worker. Waiting time, theresimulation is out of control e.g. waiting for information from colleague and computer processor, was perceived muchlonger compared to measured time.The human modelling tool seems to have matured and most of the activities identified seems to be necessary to perform human modelling simulations of high quality; however the time distribution could to some extend be questioned. There are a lot of activities associated with communication, i.e. different kinds of contacts and meetings. Therefore it appears to be a potential to increase efficiency with respect to communication.
|
|
6. |
|
|
7. |
- Dahlman-Höglund, Anna, 1964, et al.
(författare)
-
Antibodies given orally in the neonatal period can affect the immune response for two generations: evidence for active maternal influence on the newborn's immune system.
- 1999
-
Ingår i: Scandinavian journal of immunology. - 0300-9475. ; 50:6, s. 651-6
-
Tidskriftsartikel (refereegranskat)abstract
- Two day old Wistar rats were tube fed with 1 or 10 micrograms of a mouse IgG1 monoclonal anti-idiotypic (a-Id) antibody that was directed against an anti-Escherichia coli-K13 capsular polysaccharide antibody. A control group was given 10 micrograms of an unrelated control antibody. Six weeks after the administration of antibodies, the rats were intestinally colonised with an ovalbumin (OVA)-producing E. coli O6K13 strain. At 8 weeks of age, the male rats (first generation) and the offsprings of the female rats (second generation), were parenterally immunised with OVA and dead wild type E. coli O6K13, and the immune response was followed. In the rats of the first generation, there were no major differences between the groups in the immune response to the bacterium. However, the offspring of the neonatally a-Id administered rats had a profoundly affected immune response to the idiotypically connected antigen K13, but also to other antigens on the bacteria. Thus, a-Id treatment in the first generation gave, in the second generation, a greatly enhanced serum antibody response to the spatially related antigens OVA and O6 LPS, as well as to the idiotypically connected antigen K13. Concurrently, the in vitro spleen cell proliferative response to both OVA and the wild type bacterium was lowered. Overall, greater effects were seen with the higher dose of a-Id. In conclusion, our results demonstrate that by giving monoclonal antibodies idiotypically connected to a single bacterial component to neonatal rats, one profoundly influence the immune response also to other-spatially related-bacterial antigens in their offsprings.
|
|
8. |
- Gakidou, E., et al.
(författare)
-
Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks, 1990-2016: a systematic analysis for the Global Burden of Disease Study 2016
- 2017
-
Ingår i: Lancet. - : Elsevier. - 0140-6736 .- 1474-547X. ; 390:10100, s. 1345-1422
-
Tidskriftsartikel (refereegranskat)abstract
- Background The Global Burden of Diseases, Injuries, and Risk Factors Study 2016 (GBD 2016) provides a comprehensive assessment of risk factor exposure and attributable burden of disease. By providing estimates over a long time series, this study can monitor risk exposure trends critical to health surveillance and inform policy debates on the importance of addressing risks in context. Methods We used the comparative risk assessment framework developed for previous iterations of GBD to estimate levels and trends in exposure, attributable deaths, and attributable disability-adjusted life-years (DALYs), by age group, sex, year, and location for 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks from 1990 to 2016. This study included 481 risk-outcome pairs that met the GBD study criteria for convincing or probable evidence of causation. We extracted relative risk (RR) and exposure estimates from 22 717 randomised controlled trials, cohorts, pooled cohorts, household surveys, census data, satellite data, and other sources, according to the GBD 2016 source counting methods. Using the counterfactual scenario of theoretical minimum risk exposure level (TMREL), we estimated the portion of deaths and DALYs that could be attributed to a given risk. Finally, we explored four drivers of trends in attributable burden: population growth, population ageing, trends in risk exposure, and all other factors combined. Findings Since 1990, exposure increased significantly for 30 risks, did not change significantly for four risks, and decreased significantly for 31 risks. Among risks that are leading causes of burden of disease, child growth failure and household air pollution showed the most significant declines, while metabolic risks, such as body-mass index and high fasting plasma glucose, showed significant increases. In 2016, at Level 3 of the hierarchy, the three leading risk factors in terms of attributable DALYs at the global level for men were smoking (124.1 million DALYs [95% UI 111.2 million to 137.0 million]), high systolic blood pressure (122.2 million DALYs [110.3 million to 133.3 million], and low birthweight and short gestation (83.0 million DALYs [78.3 million to 87.7 million]), and for women, were high systolic blood pressure (89.9 million DALYs [80.9 million to 98.2 million]), high body-mass index (64.8 million DALYs [44.4 million to 87.6 million]), and high fasting plasma glucose (63.8 million DALYs [53.2 million to 76.3 million]). In 2016 in 113 countries, the leading risk factor in terms of attributable DALYs was a metabolic risk factor. Smoking remained among the leading five risk factors for DALYs for 109 countries, while low birthweight and short gestation was the leading risk factor for DALYs in 38 countries, particularly in sub-Saharan Africa and South Asia. In terms of important drivers of change in trends of burden attributable to risk factors, between 2006 and 2016 exposure to risks explains an 9.3% (6.9-11.6) decline in deaths and a 10.8% (8.3-13.1) decrease in DALYs at the global level, while population ageing accounts for 14.9% (12.7-17.5) of deaths and 6.2% (3.9-8.7) of DALYs, and population growth for 12.4% (10.1-14.9) of deaths and 12.4% (10.1-14.9) of DALYs. The largest contribution of trends in risk exposure to disease burden is seen between ages 1 year and 4 years, where a decline of 27.3% (24.9-29.7) of the change in DALYs between 2006 and 2016 can be attributed to declines in exposure to risks. Interpretation Increasingly detailed understanding of the trends in risk exposure and the RRs for each risk-outcome pair provide insights into both the magnitude of health loss attributable to risks and how modification of risk exposure has contributed to health trends. Metabolic risks warrant particular policy attention, due to their large contribution to global disease burden, increasing trends, and variable patterns across countries at the same level of development. GBD 2016 findings show that, while it has huge potential to improve health, risk modification has played a relatively small part in the past decade. Copyright (C) The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
9. |
- Hanson, Lars, et al.
(författare)
-
Design concept evaluation in digital human modeling tools
- 2022
-
Ingår i: Proceedings of the 7th International Digital Human Modeling Symposium (DHM 2022), August 29–30, 2022, Iowa City, Iowa, USA. - : University of Iowa Press. - 9780984037841 ; , s. 1-9
-
Konferensbidrag (refereegranskat)abstract
- In the design process of products and production systems, the activity to systematically evaluate initial alternative design concepts is an important step. The digital human modeling (DHM) tools include several different types of assessment methods in order to evaluate product and production systems. Despite this, and due to the fact that a DHM tool in essence is a computer-supported design and analysis tool, none of the DHM tools provide the functionality to, in a systematic way, use the results generated in the DHM tool to compare design concepts between each other. The aim of this paper is to illustrate how a systematic concept evaluation method is integrated in a DHM tool, and to exemplify how it can be used to systematically assess design alternatives. Pugh´s method was integrated into the IPS software with LUA scripting to systematically compare design concepts. Four workstation layout concepts were generated by four engineers. The four concepts were systematically evaluated with two methods focusing on human well-being and two methods focusing on system performance and cost. The result is very promising. The demonstrator illustrates that it is possible to perform a systematic concept evaluation based on human well-being, overall system performance, and other parameters, where some of the data is automatically provided by the DHM tool and other data manually. The demonstrator can also be used to evaluate only one design concept, where it provides the software user and the decision maker with an objective and visible overview of the success of the design proposal from the perspective of several evaluation methods.
|
|
10. |
- Hanson, Lars, 1970, et al.
(författare)
-
IMMA – Intelligently Moving Manikin – Project Status
- 2010
-
Ingår i: Proceedings of 3rd Applied Human Factors and Ergonomics (AHFE) International Conference 2010, Karwowski, W. and Salvendy, G. (Eds.), USA. - 9780979643545
-
Konferensbidrag (refereegranskat)
|
|