| 1. |
- Geng, Q., et al.
(författare)
-
Temperature limit values for touching cold surfaces with the fingertip
- 2006
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162 .- 0003-4878. ; 50:8, s. 851-862
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: At the request of the European Commission and in the framework of the European Machinery Directive, research was performed in five different laboratories to develop specifications for surface temperature limit values for the short-term accidental touching of the fingertip with cold surfaces. Methods: Data were collected in four laboratories with a total of 20 males and 20 females performing a grand total of 1655 exposures. Each touched polished blocks of aluminium, stainless steel, nylon-6 and wood using the distal phalanx of the index finger with a contact force of 1.0, 2.9 and 9.8 N, at surface temperatures from +2 to -40 degrees C for a maximum duration of 120 s. Conditions were selected in order to elicit varying rates of skin cooling upon contact. Contact temperature (T-C) of the fingertip was measured over time using a T-type thermocouple. Results: A database obtained from the experiments was collated and analysed to characterize fingertip contact cooling across a range of materials and surface temperatures. The database was subsequently used to develop a predictive model to describe the contact duration required for skin contact temperature to reach the physiological criteria of onset of pain (15 degrees C), onset of numbness (7 degrees C) and onset of frostbite risk (0 degrees C). Conclusions: The data reflect the strong link between the risk of skin damage and the thermal properties of the material touched. For aluminium and steel, skin temperatures of 0 degrees C occurs within 2-6 s at surface temperatures of -15 degrees C. For non-metallic surfaces, onset of numbness occurs within 15-65 s of contact at -35 degrees C and onset of cold pain occurs within 5 s of contact at -20 degrees C. The predictive model subsequently developed was a non-linear exponential expression also reflecting the effects of material thermal properties and initial temperature. This model provides information for the protection of workers against the risk of cold injury by establishing the temperature limits of cold touchable surfaces for a broad range of materials, and it is now proposed as guidance values in a new international standard.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Liu, Jian, et al.
(författare)
-
Amphipathic Side Chain of a Conjugated Polymer Optimizes Dopant Location toward Efficient N-Type Organic Thermoelectrics
- 2021
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 33
-
Tidskriftsartikel (refereegranskat)abstract
- There is no molecular strategy for selectively increasing the Seebeck coefficient without reducing the electrical conductivity for organic thermoelectrics. Here, it is reported that the use of amphipathic side chains in an n-type donor-acceptor copolymer can selectively increase the Seebeck coefficient and thus increase the power factor by a factor of approximate to 5. The amphipathic side chain contains an alkyl chain segment as a spacer between the polymer backbone and an ethylene glycol type chain segment. The use of this alkyl spacer does not only reduce the energetic disorder in the conjugated polymer film but can also properly control the dopant sites away from the backbone, which minimizes the adverse influence of counterions. As confirmed by kinetic Monte Carlo simulations with the host-dopant distance as the only variable, a reduced Coulombic interaction resulting from a larger host-dopant distance contributes to a higher Seebeck coefficient for a given electrical conductivity. Finally, an optimized power factor of 18 mu W m(-1) K-2 is achieved in the doped polymer film. This work provides a facile molecular strategy for selectively improving the Seebeck coefficient and opens up a new route for optimizing the dopant location toward realizing better n-type polymeric thermoelectrics.
|
|
| 6. |
- Richards, Mark G M, et al.
(författare)
-
Dry and wet heat transfer through clothing dependent on the clothing properties under cold conditions
- 2008
-
Ingår i: International Journal of Occupational Safety and Ergonomics. - 2376-9130. ; 14:1, s. 69-76
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of this study was to investigate the effect of moisture on the heat transfer through clothing in relation to the water vapour resistance, type of underwear, location of the moisture and climate. This forms part of the work performed for work package 2 of the European Union THERMPROTECT project. Thermal manikin results of dry and wet heat loss are presented from different laboratories for a range of 2-layer clothing with similar dry insulations but different water vapour permeabilities and absorptive properties. The results obtained from the different manikins are generally consistent with one another. For each climate, total wet heat loss is predominately dependent on the permeability of the outer layer. At 10 degrees C, the apparent evaporative heat loss is markedly higher than expected from evaporation alone (measured at 34 degrees C) which is attributed to condensation within the clothing and to increased conductivity of the wet clothing layers.
|
|
| 7. |
- Samuels, L, et al.
(författare)
-
Physiological mechanisms of the impact of heat during pregnancy and the clinical implications: review of the evidence from an expert group meeting
- 2022
-
Ingår i: International journal of biometeorology. - : Springer Science and Business Media LLC. - 1432-1254 .- 0020-7128. ; 66:8, s. 1505-1513
-
Tidskriftsartikel (refereegranskat)abstract
- Many populations experience high seasonal temperatures. Pregnant women are considered vulnerable to extreme heat because ambient heat exposure has been linked to pregnancy complications including preterm birth and low birthweight. The physiological mechanisms that underpin these associations are poorly understood. We reviewed the existing research evidence to clarify the mechanisms that lead to adverse pregnancy outcomes in order to inform public health actions. A multi-disciplinary expert group met to review the existing evidence base and formulate a consensus regarding the physiological mechanisms that mediate the effect of high ambient temperature on pregnancy. A literature search was conducted in advance of the meeting to identify existing hypotheses and develop a series of questions and themes for discussion. Numerous hypotheses have been generated based on animal models and limited observational studies. There is growing evidence that pregnant women are able to appropriately thermoregulate; however, when exposed to extreme heat, there are a number of processes that may occur which could harm the mother or fetus including a reduction in placental blood flow, dehydration, and an inflammatory response that may trigger preterm birth. There is a lack of substantial evidence regarding the processes that cause heat exposure to harm pregnant women. Research is urgently needed to identify what causes the adverse outcomes in pregnancy related to high ambient temperatures so that the impact of climate change on pregnant women can be mitigated.
|
|
