1. |
- Friede, Tim, et al.
(författare)
-
Recent advances in methodology for clinical trials in small populations : the InSPiRe project
- 2018
-
Ingår i: Orphanet Journal of Rare Diseases. - : Springer Science and Business Media LLC. - 1750-1172. ; 13
-
Forskningsöversikt (refereegranskat)abstract
- Where there are a limited number of patients, such as in a rare disease, clinical trials in these small populations present several challenges, including statistical issues. This led to an EU FP7 call for proposals in 2013. One of the three projects funded was the Innovative Methodology for Small Populations Research (InSPiRe) project. This paper summarizes the main results of the project, which was completed in 2017. The InSPiRe project has led to development of novel statistical methodology for clinical trials in small populations in four areas. We have explored new decision-making methods for small population clinical trials using a Bayesian decision-theoretic framework to compare costs with potential benefits, developed approaches for targeted treatment trials, enabling simultaneous identification of subgroups and confirmation of treatment effect for these patients, worked on early phase clinical trial design and on extrapolation from adult to pediatric studies, developing methods to enable use of pharmacokinetics and pharmacodynamics data, and also developed improved robust meta-analysis methods for a small number of trials to support the planning, analysis and interpretation of a trial as well as enabling extrapolation between patient groups. In addition to scientific publications, we have contributed to regulatory guidance and produced free software in order to facilitate implementation of the novel methods.
|
|
2. |
- Hee, Siew Wan, et al.
(författare)
-
Decision-theoretic designs for small trials and pilot studies : A review
- 2016
-
Ingår i: Statistical Methods in Medical Research. - : SAGE Publications. - 0962-2802 .- 1477-0334. ; 25:3, s. 1022-1038
-
Forskningsöversikt (refereegranskat)abstract
- Pilot studies and other small clinical trials are often conducted but serve a variety of purposes and there is little consensus on their design. One paradigm that has been suggested for the design of such studies is Bayesian decision theory. In this article, we review the literature with the aim of summarizing current methodological developments in this area. We find that decision-theoretic methods have been applied to the design of small clinical trials in a number of areas. We divide our discussion of published methods into those for trials conducted in a single stage, those for multi-stage trials in which decisions are made through the course of the trial at a number of interim analyses, and those that attempt to design a series of clinical trials or a drug development programme. In all three cases, a number of methods have been proposed, depending on the decision maker’s perspective being considered and the details of utility functions that are used to construct the optimal design.
|
|
3. |
- Hee, Siew Wan, et al.
(författare)
-
Does the low prevalence affect the sample size of interventional clinical trials of rare diseases? An analysis of data from the aggregate analysis of clinicaltrials.gov
- 2017
-
Ingår i: Orphanet Journal of Rare Diseases. - : Springer Science and Business Media LLC. - 1750-1172. ; 12
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Clinical trials are typically designed using the classical frequentist framework to constrain type I and II error rates. Sample sizes required in such designs typically range from hundreds to thousands of patients which can be challenging for rare diseases. It has been shown that rare disease trials have smaller sample sizes than non-rare disease trials. Indeed some orphan drugs were approved by the European Medicines Agency based on studies with as few as 12 patients. However, some studies supporting marketing authorisation included several hundred patients. In this work, we explore the relationship between disease prevalence and other factors and the size of interventional phase 2 and 3 rare disease trials conducted in the US and/or EU. We downloaded all clinical trials from Aggregate Analysis of ClinialTrials.gov (AACT) and identified rare disease trials by cross-referencing MeSH terms in AACT with the list from Orphadata. We examined the effects of prevalence and phase of study in a multiple linear regression model adjusting for other statistically significant trial characteristics. Results: Of 186941 ClinicalTrials.gov trials only 1567 (0.8%) studied a single rare condition with prevalence information from Orphadata. There were 19 (1.2%) trials studying disease with prevalence <1/1,000,000, 126 (8.0%) trials with 1-9/1,000,000, 791 (50.5%) trials with 1-9/100,000 and 631 (40.3%) trials with 1-5/10,000. Of the 1567 trials, 1160 (74%) were phase 2 trials. The fitted mean sample size for the rarest disease ( prevalence <1/1,000,000) in phase 2 trials was the lowest ( mean, 15.7; 95% CI, 8.7-28.1) but were similar across all the other prevalence classes; mean, 26.2 ( 16.1-42.6), 33. 8 (22.1-51.7) and 35.6 (23.3-54.3) for prevalence 1-9/1,000,000, 1-9/100,000 and 1-5/10,000, respectively. Fitted mean size of phase 3 trials of rarer diseases, <1/1,000,000 (19.2, 6.9-53.2) and 1-9/1,000,000 (33.1, 18.6-58.9), were similar to those in phase 2 but were statistically significant lower than the slightly less rare diseases, 1-9/100,000 (75.3, 48.2-117.6) and 1-5/10,000 (77.7, 49.6-121.8), trials. Conclusions: We found that prevalence was associated with the size of phase 3 trials with trials of rarer diseases noticeably smaller than the less rare diseases trials where phase 3 rarer disease ( prevalence <1/100,000) trials were more similar in size to those for phase 2 but were larger than those for phase 2 in the less rare disease ( prevalence >= 1/100,000) trials.
|
|
4. |
- Miller, Frank, et al.
(författare)
-
Approaches to sample size calculation for clinical trials in rare diseases
- 2018
-
Ingår i: Pharmaceutical statistics. - : Wiley. - 1539-1604 .- 1539-1612. ; 17:3, s. 214-230
-
Tidskriftsartikel (refereegranskat)abstract
- We discuss 3 alternative approaches to sample size calculation: traditional sample size calculation based on power to show a statistically significant effect, sample size calculation based on assurance, and sample size based on a decision-theoretic approach. These approaches are compared head-to-head for clinical trial situations in rare diseases. Specifically, we consider 3 case studies of rare diseases (Lyell disease, adult-onset Still disease, and cystic fibrosis) with the aim to plan the sample size for an upcoming clinical trial. We outline in detail the reasonable choice of parameters for these approaches for each of the 3 case studies and calculate sample sizes. We stress that the influence of the input parameters needs to be investigated in all approaches and recommend investigating different sample size approaches before deciding finally on the trial size. Highly influencing for the sample size are choice of treatment effect parameter in all approaches and the parameter for the additional cost of the new treatment in the decision-theoretic approach. These should therefore be discussed extensively.
|
|
5. |
- Pearce, Michael, et al.
(författare)
-
Value of information methods to design a clinical trial in a small population to optimise a health economic utility function
- 2018
-
Ingår i: BMC Medical Research Methodology. - : Springer Science and Business Media LLC. - 1471-2288. ; 18
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Most confirmatory randomised controlled clinical trials (RCTs) are designed with specified power, usually 80% or 90%, for a hypothesis test conducted at a given significance level, usually 2.5% for a one-sided test. Approval of the experimental treatment by regulatory agencies is then based on the result of such a significance test with other information to balance the risk of adverse events against the benefit of the treatment to future patients. In the setting of a rare disease, recruiting sufficient patients to achieve conventional error rates for clinically reasonable effect sizes may be infeasible, suggesting that the decision-making process should reflect the size of the target population. Methods: We considered the use of a decision-theoretic value of information (VOI) method to obtain the optimal sample size and significance level for confirmatory RCTs in a range of settings. We assume the decision maker represents society. For simplicity we assume the primary endpoint to be normally distributed with unknown mean following some normal prior distribution representing information on the anticipated effectiveness of the therapy available before the trial. The method is illustrated by an application in an RCT in haemophilia A. We explicitly specify the utility in terms of improvement in primary outcome and compare this with the costs of treating patients, both financial and in terms of potential harm, during the trial and in the future. Results: The optimal sample size for the clinical trial decreases as the size of the population decreases. For non-zero cost of treating future patients, either monetary or in terms of potential harmful effects, stronger evidence is required for approval as the population size increases, though this is not the case if the costs of treating future patients are ignored. Conclusions: Decision-theoretic VOI methods offer a flexible approach with both type I error rate and power (or equivalently trial sample size) depending on the size of the future population for whom the treatment under investigation is intended. This might be particularly suitable for small populations when there is considerable information about the patient population.
|
|
6. |
- Stallard, Nigel, et al.
(författare)
-
Determination of the optimal sample size for a clinical trial accounting for the population size
- 2017
-
Ingår i: Biometrical Journal. - : Wiley. - 0323-3847 .- 1521-4036. ; 59:4, s. 609-625
-
Tidskriftsartikel (refereegranskat)abstract
- The problem of choosing a sample size for a clinical trial is a very common one. In some settings, such as rare diseases or other small populations, the large sample sizes usually associated with the standard frequentist approach may be infeasible, suggesting that the sample size chosen should reflectthe size of the population under consideration. Incorporation of the population size is possible in adecision-theoretic approach either explicitly by assuming that the population size is fixed and known, or implicitly through geometric discounting of the gain from future patients reflecting the expected population size. This paper develops such approaches. Building on previous work, an asymptotic expression is derived for the sample size for single and two-arm clinical trials in the general case of a clinical trial with a primary endpoint with a distribution of one parameter exponential family form that optimizes a utility function that quantifies the cost and gain per patient as a continuous function of this parameter. It is shown that as the size of the population, N, or expected size, N∗ in the case of geometric discounting, becomes large, the optimal trial size is O(N^1/2) or O(N∗^1/2). The sample size obtained from the asymptotic expression is also compared with the exact optimal sample size in examples with responses with Bernoulli and Poisson distributions, showing that the asymptotic approximations can also be reasonable in relatively small sample sizes.
|
|