1. |
- Donner, Erica, et al.
(author)
-
Presence and fate of priority substances in domestic greywater treatment and reuse systems
- 2010
-
In: Science of the Total Environment. - : Elsevier BV. - 0048-9697 .- 1879-1026. ; 408:12, s. 2444-2451
-
Journal article (peer-reviewed)abstract
- A wide range of household sources may potentially contribute to contaminant loads in domestic greywater. The ability of greywater treatment systems to act as emission control barriers for household micropollutants, thereby providing environmental benefits in addition to potable water savings, have not been fully explored. This paper investigates the sources, presence and potential fate of a selection of xenobiotic micropollutants in on-site greywater treatment systems. All of the investigated compounds are listed under the European Water Framework Directive as either "Priority Substances" (PS) or "Priority Hazardous Substances" (PHS). Significant knowledge gaps are identified. A wide range of potential treatment trains are available for greywater treatment and reuse but treatment efficiency data for priority substances and other micropollutants is very limited. Geochemical modelling indicates that PS/PHS removal during treatment is likely to be predominantly due to sludge/solid phase adsorption, with only minor contributions to the water phase. Many PS/PHS are resistant to biodegradation and as the majority of automated greywater treatment plants periodically discharge sludge to the municipal sewerage system, greywater treatment is unlikely to act as a comprehensive PS/PHS emission barrier. Hence, it is important to ensure that other source control options (e.g. eco-labeling, substance substitution, and regulatory controls) for household items continue to be pursued, in order that PS/PHS emissions from these sources are effectively reduced and/or phased out as required under the demands of the European Water Framework Directive.
|
|
2. |
- Eriksson, Eva, 1973-, et al.
(author)
-
Emission control strategies for short-chain chloroparaffins in two semi-hypothetical case cities
- 2012
-
In: Urban environment. - Dordrecht : Springer. - 9789400725393 - 9789400725409 ; , s. 213-223
-
Conference paper (peer-reviewed)abstract
- The short-chain chloroparaffins (SCCP), (C10-13 chloroalkanes) are identified in the European Water Framework Directive, as priority hazardous substances. Within the ScorePP project, the aim is to develop emission control strategies that can be employed to reduce emissions from urban areas into receiving waters. Six different scenarios for mitigating SCCP emissions in two different semi-hypothetical case cities representing eastern inland and northern coastal conditions have been evaluated. The analysis, associated with scenario uncertainty, indicates that the EU legislation, Best Available Technologies (BAT) and stormwater/CSO management were the most favorable in reducing emissions into the environment.
|
|
3. |
- Eriksson, Eva, 1973-, et al.
(author)
-
Water management in cities of the future using emission control strategies for priority hazardous substances
- 2011
-
In: Water Science and Technology. - : IWA Publishing. - 0273-1223 .- 1996-9732. ; 64:10, s. 2109-2118
-
Journal article (peer-reviewed)abstract
- Cities of the future face challenges with respect to the quantity and quality of water resources, and multiple managerial options need to be considered in order to safeguard urban surface water quality. In a recently completed project on “Source Control Options for Reducing Emissions of Priority Pollutants” (ScorePP), seven emission control strategies (ECS) have been developed and tested on a semi-hypothetical case city (SHCCA) for selected European priority pollutants (PPs). The SHCCA approach was chosen to facilitate transparency, to mitigate data gaps and to decrease the level of uncertainty in the results. The selected PPs differ in their uses and environmental fate and therefore accumulate in different urban environmental compartment. To achieve the required reduction in PP levels in urban waters the full implementation of existing EU regulation is essential and appropriate combinations of managerial and technological options (source control and treatment) can be highly relevant.
|
|
4. |
- Hartmann, Nanna B., et al.
(author)
-
NanoCRED : A transparent framework to assess the regulatory adequacy of ecotoxicity data for nanomaterials - Relevance and reliability revisited
- 2017
-
In: NanoImpact. - : Elsevier BV. - 2452-0748. ; 6, s. 81-89
-
Journal article (peer-reviewed)abstract
- Environmental hazard and risk assessment serve as the basis for regulatory decisions to protect the environment from unintentional adverse effects of chemical substances including nanomaterials. This process requires reliable and relevant environmental hazard data upon which classification and labelling can be based and Predicted No-Effect Concentration (PNEC) values can be estimated. In a regulatory context ecotoxicological data is often recommended to be generated according to accepted and validated test guidelines, preferably also following Good Laboratory Practice. However, engineered nanomaterials are known to behave very differently in ecotoxicity tests compared to the conventional soluble chemicals, for which most guidelines were developed. Therefore non-guideline tests, or tests following modified test guidelines, can provide valuable information and should not per se be considered less adequate for regulatory use. Here we propose a framework for reliability and relevance evaluation of ecotoxicity data for nanomaterials that take into account the challenges and characterisation requirements associated with testing of these substances. The nanoCRED evaluation criteria, and accompanying guidance, were developed to be used in combination with those developed through the ‘Criteria for Reporting and Evaluating Ecotoxicity Data (CRED)’ project. This approach can accommodate all types of nanomaterials, all types of aquatic ecotoxicity studies, and qualitative as well as quantitative data evaluation requirements. Furthermore, it is practically feasible to implement and directly applicable in European as well as international regulatory frameworks.
|
|
5. |
- Lützhøft, Hans-Christian Holten, et al.
(author)
-
A source classification framework supporting pollutant source mapping, pollutant release prediction, transport and load forecasting, and source control planning for urban environments
- 2012
-
In: Environmental Science and Pollution Research. - : Springer Science and Business Media LLC. - 0944-1344 .- 1614-7499. ; 19:4, s. 1119-1130
-
Journal article (peer-reviewed)abstract
- PurposeImplementation of current European environmental legislation such as the Water Framework Directive requires access to comprehensive, well-structured pollutant source and release inventories. The aim of this work was to develop a Source Classification Framework (SCF) ideally suited for this purpose.MethodsExisting source classification systems were examined by a multidisciplinary research team, and an optimised SCF was developed. The performance and usability of the SCF were tested using a selection of 25 chemicals listed as priority pollutants in Europe.ResultsThe SCF is structured in the form of a relational database and incorporates both qualitative and quantitative source classification and release data. The system supports a wide range of pollution monitoring and management applications. The SCF functioned well in the performance test, which also revealed important gaps in priority pollutant release data.ConclusionsThe SCF provides a well-structured approach for European pollutant source and release classification and management. With further optimisation and demonstration testing, the SCF has the potential to be fully implemented throughout Europe.
|
|
6. |
|
|
7. |
- Mikkelsen, Peter Steen, et al.
(author)
-
Options de contrôle à la source pour la réduction d'émissions de substances prioritaires en zone urbaine : [ Source control options for reducing emissions of priority pollutants ]
- 2009
-
In: Techniques Sciences Methodes, Genie Urbain Genie Rural. - : Association scientifique et technique pour l'eau et l'environnement. - 0299-7258. ; 104:4, s. 77-87
-
Journal article (pop. science, debate, etc.)abstract
- L’objectif du projet ScorePP est de développer des stratégies de contrôle à la source complètes et appropriées que les autorités, les villes, les gestionnaires de l’eau et l’industrie chimique pourront utiliser pour réduire les émissions des polluants prioritaires (PP) des milieux aquatiques en zones urbaines. Le travail se focalise sur les 33 substances prioritaires et groupe de substances dangereuses identifiés dans la directive cadre sur l’eau (2000/60/CE). Cependant, cette liste peut être élargie pour inclure d’autres polluants émergents ou être réduite si des composés représentatifs peuvent être identifiés. Le travail initial se concentre sur 67 substances comprenant des substances identifiées dans la directive sur la norme de qualité environnementale européenne (NQE) (2008/105/CE), sur des composés caractéristiques ainsi que plusieurs dérivés organométalliques. L’information sur les propriétés inhérentes, la présence et le devenir environnemental et les questions législatives est disponible à travers une base de données publique. Un système de gestion de données combinant les classifications d’identification chimique (CAS#), les activités économiques (NACE) et les classifications des sources d’émission NOSE-P a également été développé comme base pour la caractérisation spatiale des sources des PP en utilisant le système d’information géographique (SIG). Une autre partie du projet se concentrera sur les modèles dynamiques pour l’évaluation de source/flux à échelle urbaine, sur l’identification des modèles d’émission et sur l’optimisation des programmes de contrôle dans des villes cas. Des comparaisons, se basant sur plusieurs critères de contrôle à la source contre des options de réduction de rejets finaux, en prenant en compte les impacts environnementaux et socio-économiques, seront également abordées. Une autre partie du projet se concentre sur l’acquisition et la génération de données sur les PP dans plusieurs villes cas. Cela permettra d’identifier les sources probables de PP, de cartographier ces sources à l’aide du SIG, de comprendre le flux de certains PP et de proposer des options de contrôle d’émission pour ces villes. Cette base de données permettra, par la suite, de proposer des stratégies de contrôles d’émissions spécifiques pour chaque ville cas.
|
|