| 1. |
- Hu, Xing, et al.
(författare)
-
Dynamic Channel Slot Allocation Scheme and Performance Analysis of Cyclic Quorum Multichannel MAC Protocol
- 2017
-
Ingår i: Mathematical problems in engineering (Print). - : HINDAWI LTD. - 1024-123X .- 1563-5147.
-
Tidskriftsartikel (refereegranskat)abstract
- In high diversity node situation, multichannel MAC protocol can improve the frequency efficiency, owing to fewer collisions compared with single-channel MAC protocol. And the performance of cyclic quorum-based multichannel (CQM) MAC protocol is outstanding. Based on cyclic quorum system and channel slot allocation, it can avoid the bottleneck that others suffered from and can be easily realized with only one transceiver. To obtain the accurate performance of CQMMAC protocol, a Markov chain model, which combines the channel-hopping strategy of CQM protocol and IEEE 802.11 distributed coordination function (DCF), is proposed. The results of numerical analysis show that the optimal performance of CQM protocol can be obtained in saturation bound situation. And then we obtain the saturation bound of CQM system by bird swarm algorithm. In addition, to improve the performance of CQM protocol in unsaturation situation, a dynamic channel slot allocation of CQM(DCQM) protocol is proposed, based on wavelet neural network. Finally, the performance of CQM protocol and DCQM protocol is simulated by Qualnet platform. And the simulation results show that the analytic and simulation results match very well; the DCQM performs better in unsaturation situation.
|
|
| 2. |
- Hu, Xing, et al.
(författare)
-
Performance analysis and saturation bound research of cyclic-quorum multichannel MAC protocol based on Markov chain model
- 2017
-
Ingår i: KSII TRANSACTIONS ON INTERNET AND INFORMATION SYSTEMS. - : KSII-KOR SOC INTERNET INFORMATION. - 1976-7277. ; 11:8, s. 3862-3888
-
Tidskriftsartikel (refereegranskat)abstract
- In high diversity node situation, single-channel MAC protocols suffer from many collisions. To solve this problem, the research of multichannel MAC protocol has become a hotspot. And the cyclic quorum-based multichannel (CQM) MAC protocol outperformed others owing to its high frequency utilization. In addition, it can avoid the bottleneck that others suffered from and can be easily realized with only one transceiver. To obtain the accurate performance of CQM MAC protocol, a Markov chain model, which combines the channel hopping strategy of CQM protocol and IEEE 802.11 distributed coordination function (DCF), is proposed. The metrics (throughput and average packet transmission delay) are calculated in performance analysis, with respect to node number, packet rate, channel slot length and channel number. The results of numerical analysis show that the optimal performance of CQM protocol can be obtained in saturation bound situation. And then we obtain the saturation bound of CQM system by bird swarm algorithm (BSA). Finally, the Markov chain model and saturation bound are verified by Qualnet platform. And the simulation results show that the analytic and simulation results match very well.
|
|
| 3. |
- Huang, Tianyu, et al.
(författare)
-
2D autoregressive model-based dynamic correlated massive MU-MIMO channel simulator
- 2017
-
Ingår i: Electronics Letters. - : INST ENGINEERING TECHNOLOGY-IET. - 0013-5194 .- 1350-911X. ; 53:17
-
Tidskriftsartikel (refereegranskat)abstract
- To design a dynamic correlated channel simulator which can precisely depict the space-time correlation properties and be suitable for the massive multi-user multiple-input multiple-output (MU-MIMO) system, a 2D autoregressive (2D AR) model-based method is proposed. Specifically, by exploiting stationarity in space-time domain, the authors use 2D AR method to create the space-time channel matrices of every user separately. In this way, the space-time dimension of the simulated channel can be modified flexibly without rebuilding the 2D AR model, and spatial correlation matrix with excessively big size is not necessary to guarantee the accuracy of the proposed simulator, making it suitable for massive MU-MIMO system. Simulation results verify the advantages of the proposed simulator.
|
|
| 4. |
- Kristan, Matej, et al.
(författare)
-
The first visual object tracking segmentation VOTS2023 challenge results
- 2023
-
Ingår i: 2023 IEEE/CVF International conference on computer vision workshops (ICCVW). - : Institute of Electrical and Electronics Engineers Inc.. - 9798350307443 - 9798350307450 ; , s. 1788-1810
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking Segmentation VOTS2023 challenge is the eleventh annual tracker benchmarking activity of the VOT initiative. This challenge is the first to merge short-term and long-term as well as single-target and multiple-target tracking with segmentation masks as the only target location specification. A new dataset was created; the ground truth has been withheld to prevent overfitting. New performance measures and evaluation protocols have been created along with a new toolkit and an evaluation server. Results of the presented 47 trackers indicate that modern tracking frameworks are well-suited to deal with convergence of short-term and long-term tracking and that multiple and single target tracking can be considered a single problem. A leaderboard, with participating trackers details, the source code, the datasets, and the evaluation kit are publicly available at the challenge website1
|
|
| 5. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 6. |
- Li, Danqin, et al.
(författare)
-
n-Doping of photoactive layer in binary organic solar cells realizes over 18.3% efficiency
- 2022
-
Ingår i: Nano Energy. - : ELSEVIER. - 2211-2855 .- 2211-3282. ; 96
-
Tidskriftsartikel (refereegranskat)abstract
- Electronic doping of conjugated semiconductor plays a critical role in the fabrication of high efficiency organic optoelectronic devices. Here, we report an organic solar cell (OSC) by doping n-type DMBI-BDZC into one host binary bulk heterojunction (BHJ) photoactive layer comprised of a polymer donor PM6 and a nonfullerene acceptor Y6. The resulting champion device yields a significantly improved power conversion efficiency from 17.17% to 18.33% with an impressive fill factor of 80.20%. It is found that the electrically doped photoactive layer exhibits enhanced and balanced charge carrier mobilities, more effective exciton dissociation, longer carrier lifetime, and suppressed charge recombination with smaller energy loss. The dopant molecule DMBIBDZC also act as a surface morphology modifier of the photoactive layer with enhanced charge transport. This work demonstrates that manipulation of charge transport via adding a low concentration dopant into photoactive layer is a promising approach for further improvement of BHJ OSC performance.
|
|
| 7. |
- Qiu, Tianyu, et al.
(författare)
-
High-fidelity spectroscopy reconstruction in accelerated NMR.
- 2018
-
Ingår i: Chemical communications (Cambridge, England). - : Royal Society of Chemistry (RSC). - 1364-548X .- 1359-7345. ; 54:78, s. 10958-10961
-
Tidskriftsartikel (refereegranskat)abstract
- Non-uniform sampling significantly accelerates the data acquisition time in NMR spectroscopy, but spectra must be reconstructed with appropriate methods. A high-fidelity reconstruction method is proposed to preserve low-intensity spectral peaks and provide stable reconstruction under different sampling trials.
|
|
| 8. |
- Sun, Fengbo, et al.
(författare)
-
1,5-Diiodocycloctane: a cyclane solvent additive that can extend the exciton diffusion length in thick film organic solar cells
- 2024
-
Ingår i: Energy and Environmental Sciences. - 1754-5692 .- 1754-5706. ; 17:5, s. 1916-1930
-
Tidskriftsartikel (refereegranskat)abstract
- The short exciton diffusion length associated with most state-of-the-art organic semiconductors used in organic solar cells (OSCs) imposes severe limits on the exciton transport in the larger donor/acceptor domains and the exciton dissociation at the interface, which hinder further improvements in the power conversion efficiencies (PCE) of the thick-film devices. In this study, a new cyclane, 1,5-diiodocycloctane (DICO), was employed as a solvent additive to effectively extend the exciton LD within the bulk-heterojunction blend, which can function with the multiple photovoltaic materials system. Due to the great enhancement of molecular stacking and exclusively large domain sizes of photovoltaic materials with the assistance of the DICO additive, the trap density in devices is significantly reduced, thereby nearly doubling the LD in the thick film OSCs. Notably, the DICO-processed PM6/L8-BO-based OSC showed high thickness tolerance for the bulk-heterojunction (BHJ) layer, delivering a high PCE of 19.1% in the case of a 110 nm thick film and still maintaining an excellent PCE of 17.2% in the case of a 300 nm thick film. Crucially, a noticeably increased stability of the multiple materials system was observed in the DICO-processed OSCs. These findings enrich the additive family with new cyclane systems to extend the exciton LD in thick film OSCs with high performance.
|
|
| 9. |
- Xiong, Shaobing, et al.
(författare)
-
Direct Observation on p- to n-Type Transformation of Perovskite Surface Region during Defect Passivation Driving High Photovoltaic Efficiency
- 2021
-
Ingår i: Joule. - : CELL PRESS. - 2542-4351. ; 5:2, s. 467-480
-
Tidskriftsartikel (refereegranskat)abstract
- Perovskite solar cells (PSCs) suffer from significant nonradiative recombination, limiting their power conversion efficiencies. Here, for the first time, we directly observe a complete transformation of perovskite MAPbI(3) surface region energetics from p- to n-type during defect passivation caused by natural additive capsaicin, attributed to the spontaneous formation of a p-n homojunction in perovskite active layer. We demonstrate that the p-n homojunction locates at similar to 100 nm below perovskite surface. The energetics transformation and defect passivation promote charge transport in bulk perovskite layer and at perovskite/PCBM interface, suppressing both defect-assisted recombination and interface carrier recombination. As a result, an efficiency of 21.88% and a fill factor of 83.81% with excellent device stability are achieved, both values are the highest records for polycrystalline MAPbI(3) based p-i-n PSCs reported to date. The proposed new concept of synergetic defect passivation and energetic modification via additive provides a huge potential for further improvement of PSC performance.
|
|
| 10. |
- Zheng, Tianyu, et al.
(författare)
-
A Singular Perturbation-based Design for the Integrated Guidance and Control
- 2016
-
Ingår i: 2016 AMERICAN CONTROL CONFERENCE (ACC). - : IEEE conference proceedings. - 9781467386821 ; , s. 4287-4292
-
Konferensbidrag (refereegranskat)abstract
- This paper considers the guidance and control problem of a flight vehicle with a seeker installed on the side of its head for avoiding the aerodynamic heating. In order to guarantee the target remaining in the seeker's sight of view, the line of sight and the attitude of the flight vehicle should be under some constraints which cause coupling between the guidance and the attitude control. Therefore, the integrated guidance and control (IGC) is necessary. We first formulate the guidance and control problem of the interceptor into an IGC problem with constraints. Then, a singular perturbation-based design approach is proposed to decompose the IGC problem into the control design of the quasi-steady-state subsystem and the boundary-layer subsystem individually. The receding horizon control is applied in the control design for the two subsystems. Simulation results show the effectiveness of the proposed approach.
|
|
