1. |
|
|
2. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
3. |
- Liu, Tao, et al.
(författare)
-
16% efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend
- 2021
-
Ingår i: Joule. - : CELL PRESS. - 2542-4351. ; 5:4, s. 914-930
-
Tidskriftsartikel (refereegranskat)abstract
- A SUMMARY There is an urgent demand for all-polymer organic solar cells (AP-OSCs) to gain higher efficiency. Here, we successfully improve the performance to 16.09% by introducing a small amount of BN-T, a B <- N-type polymer acceptor, into the PM6:PY-IT blend. It has been found that BN-T makes the active layer, based on the PM6:PY-IT:BN-T ternary blend, more crystalline but meanwhile slightly reduces the phase separation, leading to enhancement of both exciton harvesting and charge transport. From a thermodynamic viewpoint, BN-T prefers to reside between PM6 and PY-IT, and the fraction of this fine-tunes the morphology. Besides, a significantly reduced nonradiative energy loss occurs in the ternary blend, along with the coexistence of energy and charge transfer between the two acceptors. The progressive performance facilitated by these improved properties demonstrates that AP-OSCs can possibly comparably efficient with those based on small molecule acceptors, further enhancing the competitiveness of this device type.
|
|
4. |
- Wang, Ji Yin, et al.
(författare)
-
Anisotropic Pauli Spin-Blockade Effect and Spin-Orbit Interaction Field in an InAs Nanowire Double Quantum Dot
- 2018
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 18:8, s. 4741-4747
-
Tidskriftsartikel (refereegranskat)abstract
- We report on experimental detection of the spin-orbit interaction field in an InAs nanowire double quantum dot device. In the spin blockade regime, leakage current through the double quantum dot is measured and is used to extract the effects of spin-orbit interaction and hyperfine interaction on spin state mixing. At finite magnetic fields, the leakage current arising from the hyperfine interaction can be suppressed, and the spin-orbit interaction dominates spin state mixing. We observe dependence of the leakage current on the applied magnetic field direction and determine the direction of the spin-orbit interaction field. We show that the spin-orbit field lies in a direction perpendicular to the nanowire axis but with a pronounced off-substrate-plane angle. The results are expected to have an important implication in employing InAs nanowires to construct spin-orbit qubits and topological quantum devices.
|
|
5. |
- Wang, Ji Yin, et al.
(författare)
-
Coherent Transport in a Linear Triple Quantum Dot Made from a Pure-Phase InAs Nanowire
- 2017
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 17:7, s. 4158-4164
-
Tidskriftsartikel (refereegranskat)abstract
- A highly tunable linear triple quantum dot (TQD) device is realized in a single-crystalline pure-phase InAs nanowire using a local finger gate technique. The electrical measurements show that the charge stability diagram of the TQD can be represented by three kinds of current lines of different slopes and a simulation performed based on a capacitance matrix model confirms the experiment. We show that each current line observable in the charge stability diagram is associated with a case where a QD is on resonance with the Fermi level of the source and drain reservoirs. At a triple point where two current lines of different slopes move together but show anticrossing, two QDs are on resonance with the Fermi level of the reservoirs. We demonstrate that an energetically degenerated quadruple point at which all three QDs are on resonance with the Fermi level of the reservoirs can be built by moving two separated triple points together via sophistically tuning of energy levels in the three QDs. We also demonstrate the achievement of direct coherent electron transfer between the two remote QDs in the TQD, realizing a long-distance coherent quantum bus operation. Such a long-distance coherent coupling could be used to investigate coherent spin teleportation and superexchange effects and to construct a spin qubit with an improved long coherent time and with spin state detection solely by sensing the charge states.
|
|
6. |
- Yuan, Shichen, et al.
(författare)
-
Balancing Charge Injection via a Tailor-Made Electron-Transporting Material for High Performance Blue Perovskite QLEDs
- 2023
-
Ingår i: ACS Energy Letters. - : AMER CHEMICAL SOC. - 2380-8195. ; 8:1, s. 818-826
-
Tidskriftsartikel (refereegranskat)abstract
- One of the great challenges in perovskite quantum dot light-emitting diodes (Pe-QLEDs) is the unbalanced charge injection that significantly hinders the device performance and stability. Herein, we tailor-made a high mobility electron-transporting material (ETM), named B2, to balance the carrier injection in blue Pe-QLEDs. B2 with a tailored asymmetric anthracenyl structure exhibits a promising electron mobility of 2.7 x 10(-4) cm(2)center dot V-1 center dot s(-1), which is almost 20 times higher than the commonly used ETM-TPBi (1.1 x 10(-5) cm(2)center dot V-1 center dot s(-1)). Subsequently, sky blue (490 nm) Pe-QLED with B2 as the ETM presented a remarkably high external quantum efficiency (EQE) of 13.17% and a low turn-on voltage of 2.2 V, which is much better than that of the TPBi-based device (EQE of 8.31% and Vturn-on of 3.2 V). In addition, B2 also demonstrated a universal application in green and deep blue Pe-QLEDs. This work provides an important guidance to rational design of high electron mobility ETMs for high-performance LEDs.
|
|
7. |
- Cai, Shengyun, et al.
(författare)
-
Photo-stable substituted dihydroindolo[2,3-b]carbazole-based organic dyes : tuning the photovoltaic properties by optimizing the pi structure for panchromatic DSSCs
- 2014
-
Ingår i: Tetrahedron. - : Elsevier BV. - 0040-4020 .- 1464-5416. ; 70:43, s. 8122-8128
-
Tidskriftsartikel (refereegranskat)abstract
- Three dihydroindolo[2,3-b]carbazole (DDC) donor based organic dyes (DDC6-DDC8) with long conjugated systems were successfully synthesized and characterized by optical, electrochemical, computational analysis, and photovoltaic methods. It was found that the elongated pi system as well as the high molar extinction coefficients (4.2-5.3 M-1 cm(-1)) sufficiently reinforced the light harvesting ability with the IPCE response of one dye DDC8 extended to 850 nm, which resulted in large J(sc) of these dyes based devices (high as 16.41 mA cm(-2)). The attached alkyl chains suppress the dark current to some extent, resulting the DDC6 and DDC7 devices in high V-oc, while DDC8 displayed low V-oc, because BTD in DDC8 could attract the iodine ion, which could accelerate the charge recombination. Among the three dyes, DDC7 displayed the best performance with an eta value 6.53% under 4 mu m thick scattering layer (condition 1+1), which was boosted to 7.49% under 8 mu m thick scattering layer (condition 1+2). The photo-stability measurements indicated that all the three dyes are fairly photo-stable.
|
|
8. |
- Chen, Jianhua, et al.
(författare)
-
Highly stretchable organic electrochemical transistors with strain-resistant performance
- 2022
-
Ingår i: Nature Materials. - : NATURE PORTFOLIO. - 1476-1122 .- 1476-4660. ; 21, s. 564-571
-
Tidskriftsartikel (refereegranskat)abstract
- Realizing fully stretchable electronic materials is central to advancing new types of mechanically agile and skin-integrable optoelectronic device technologies. Here we demonstrate a materials design concept combining an organic semiconductor film with a honeycomb porous structure with biaxially prestretched platform that enables high-performance organic electrochemical transistors with a charge transport stability over 30-140% tensional strain, limited only by metal contact fatigue. The prestretched honeycomb semiconductor channel of donor-acceptor polymer poly(2,5-bis(2-octyldodecyl)-3,6-di(thiophen-2-yl)-2,5-diketo-pyrrolopyrrole-alt-2,5-bis(3-triethyleneglycoloxy-thiophen-2-yl) exhibits high ion uptake and completely stable electrochemical and mechanical properties over 1,500 redox cycles with 10(4) stretching cycles under 30% strain. Invariant electrocardiogram recording cycles and synapse responses under varying strains, along with mechanical finite element analysis, underscore that the present stretchable organic electrochemical transistor design strategy is suitable for diverse applications requiring stable signal output under deformation with low power dissipation and mechanical robustness. Highly stretchable organic electrochemical transistors with stable charge transport under severe tensional strains are demonstrated using a honeycomb semiconducting polymer morphology, thereby enabling controllable signal output for diverse stretchable bioelectronic applications.
|
|
9. |
- Chen, Yanping, et al.
(författare)
-
PKU-20 : A new silicogermanate constructed from sti and asv layers
- 2016
-
Ingår i: Microporous and Mesoporous Materials. - : Elsevier BV. - 1387-1811 .- 1873-3093. ; 224, s. 384-391
-
Tidskriftsartikel (refereegranskat)abstract
- A new silicogermanate (PKU-20) was hydrothermally synthesized using triethylisopropylammonium cation as the structure directing agent in the presence of fluoride. Its structure was determined from a combination of synchrotron single crystal X-ray diffraction and powder X-ray diffraction data. PKU-20 crystallizes in the monoclinic space group C2/m, with the lattice parameters of a = 18.5901(6) angstrom, b = 13.9118 (4) angstrom, c = 22.2614(7) angstrom and beta = 100.1514 (12)degrees. The framework of PKU-20 is constructed from an alternate stacking of sti and asv layers. The sti layer is exactly the same as that in the STI framework, while the asv layer is a new layer sliced off from the ASV framework parallel to the (112) plane. The takeout scheme of the layer is discussed on the basis of a composite building unit D4R-/au-D4R. PKU-20 possesses a two-dimensional channel system, where the 10-ring channels parallel to the [010] direction are intercrossed by 12-ring pockets along the [101] direction.
|
|
10. |
- Feng, Kui, et al.
(författare)
-
Fused Bithiophene Imide Dimer-Based n-Type Polymers for High-Performance Organic Electrochemical Transistors
- 2021
-
Ingår i: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 60:45, s. 24198-24205
-
Tidskriftsartikel (refereegranskat)abstract
- The development of n-type organic electrochemical transistors (OECTs) lags far behind their p-type counterparts. In order to address this dilemma, we report here two new fused bithiophene imide dimer (f-BTI2)-based n-type polymers with a branched methyl end-capped glycol side chain, which exhibit good solubility, low-lying LUMO energy levels, favorable polymer chain orientation, and efficient ion transport property, thus yielding a remarkable OECT electron mobility (mu(e)) of up to approximate to 10(-2) cm(2) V-1 s(-1) and volumetric capacitance (C*) as high as 443 F cm(-3), simultaneously. As a result, the f-BTI2TEG-FT-based OECTs deliver a record-high maximum geometry-normalized transconductance of 4.60 S cm(-1) and a maximum mu C* product of 15.2 F cm(-1) V-1 s(-1). The mu C* figure of merit is more than one order of magnitude higher than that of the state-of-the-art n-type OECTs. The emergence of f-BTI2TEG-FT brings a new paradigm for developing high-performance n-type polymers for low-power OECT applications.
|
|