| 1. |
|
|
| 2. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 3. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 4. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 5. |
- Li, Youbing, et al.
(författare)
-
Single-Atom-Thick Active Layers Realized in Nanolaminated Ti-3(AlxCu1-x)C-2 and Its Artificial Enzyme Behavior
- 2019
-
Ingår i: ACS Nano. - : AMER CHEMICAL SOC. - 1936-0851 .- 1936-086X. ; 13:8, s. 9198-9205
-
Tidskriftsartikel (refereegranskat)abstract
- A Ti-3(AlxCu1-x)C-2 phase with Cu atoms with a degree of ordering in the A plane is synthesized through the A site replacement reaction in CuCl2 molten salt. The weakly bonded single -atom -thick Cu layers in a Ti-3(AlxCu1-x)C-2 MAX phase provide actives sites for catalysis chemistry. As -synthesized Ti-3(AlxCu1-x)C-2 presents unusual peroxidase-like catalytic activity similar to that of natural enzymes. A fabricated Ti-3(AlxCu1-x)C-2/chitosan/glassy carbon electrode biosensor prototype also exhibits a low detection limit in the electrochemical sensing of H2O2. These results have broad implications for property tailoring in a nanolaminated MAX phase by replacing the A site with late transition elements.
|
|
| 6. |
- Pecunia, Vincenzo, et al.
(författare)
-
Roadmap on energy harvesting materials
- 2023
-
Ingår i: Journal of Physics. - : IOP Publishing. - 2515-7639. ; 6:4
-
Tidskriftsartikel (refereegranskat)abstract
- Ambient energy harvesting has great potential to contribute to sustainable development and address growing environmental challenges. Converting waste energy from energy-intensive processes and systems (e.g. combustion engines and furnaces) is crucial to reducing their environmental impact and achieving net-zero emissions. Compact energy harvesters will also be key to powering the exponentially growing smart devices ecosystem that is part of the Internet of Things, thus enabling futuristic applications that can improve our quality of life (e.g. smart homes, smart cities, smart manufacturing, and smart healthcare). To achieve these goals, innovative materials are needed to efficiently convert ambient energy into electricity through various physical mechanisms, such as the photovoltaic effect, thermoelectricity, piezoelectricity, triboelectricity, and radiofrequency wireless power transfer. By bringing together the perspectives of experts in various types of energy harvesting materials, this Roadmap provides extensive insights into recent advances and present challenges in the field. Additionally, the Roadmap analyses the key performance metrics of these technologies in relation to their ultimate energy conversion limits. Building on these insights, the Roadmap outlines promising directions for future research to fully harness the potential of energy harvesting materials for green energy anytime, anywhere.
|
|
| 7. |
- Chi, Zhi-Hong, et al.
(författare)
-
Zinc transporter 7 is located in the cis-Golgi apparatus of mouse choroid epithelial cells.
- 2006
-
Ingår i: Neuroreport. - : Ovid Technologies (Wolters Kluwer Health). - 0959-4965. ; 17:17, s. 1807-11
-
Tidskriftsartikel (refereegranskat)abstract
- The cellular localization of zinc transporter 7 protein in the mouse choroid plexus was examined in this study. Zinc transporter 7 immunoreactive cells were detected in the third, lateral, and fourth ventricles of CD-1 mouse brain. Distinct zinc transporter 7 immunoreactivity was concentrated in the perinuclear regions of the positive cells. The results from zinc autometallography showed that zinc-positive grains were also predominantly located in the perinuclear areas. Ultrastructural localization showed that zinc transporter 7 immunostaining was predominantly present in the membrane and cisternae of the cis-Golgi networks and some vesicle compartments. The results support the notion that zinc transporter 7 may participate in the transport of the cytoplasmic zinc into the Golgi apparatus, and may be involved in local packaging of zinc-binding proteins in the mouse choroid plexus.
|
|
| 8. |
- Kristan, Matej, et al.
(författare)
-
The Sixth Visual Object Tracking VOT2018 Challenge Results
- 2019
-
Ingår i: Computer Vision – ECCV 2018 Workshops. - Cham : Springer Publishing Company. - 9783030110086 - 9783030110093 ; , s. 3-53
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2018 is the sixth annual tracker benchmarking activity organized by the VOT initiative. Results of over eighty trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis and a “real-time” experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. A long-term tracking subchallenge has been introduced to the set of standard VOT sub-challenges. The new subchallenge focuses on long-term tracking properties, namely coping with target disappearance and reappearance. A new dataset has been compiled and a performance evaluation methodology that focuses on long-term tracking capabilities has been adopted. The VOT toolkit has been updated to support both standard short-term and the new long-term tracking subchallenges. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website (http://votchallenge.net).
|
|
| 9. |
- Liu, Chun-Yan, et al.
(författare)
-
Massively Parallel Aligned Poly(vinylidene fluoride) Nanofibrils in All-Organic Dielectric Polymer Composite Films for Electric Energy Storage
- 2023
-
Ingår i: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 56:4, s. 1481-1491
-
Tidskriftsartikel (refereegranskat)abstract
- It is a formidable challenge to combine the perform-ance advantages of linear and nonlinear polymer dielectrics for developing all-organic film capacitors with high energy density and low loss. In this work, massively parallel aligned poly(vinylidene fluoride) (PVDF) nanofibrils were in situ fabricated for the first time in the polyethylene (PE) matrix via a multistage stretching technology involving hot stretching and solid-state stretching at an elevated temperature. The largely enhanced interfacial area of PVDF nanofibrils could effectively induce interfacial polarization, imparting PE composite films with a high dielectric constant of 4.50. More interestingly, the nanoconfinement effect of PVDF nanofibrils greatly restricted the migration of free electrons and impurity ions, and an impressive breakdown strength of 624 MV m-1 was obtained. As a result, the as-prepared PE/PVDF composite films exhibited an attractive discharged energy density of as high as 6.4 J cm-3, which was more than 10 times of the conventional counterparts, and outperformed the current linear dielectric polymers. The ingenious structure design of in situ nonlinear dielectric nanofibrils provides a promising approach to maximize the advantageous polarizations and minimize the disadvantageous polarizations in the linear and nonlinear polymer dielectric blends, achieving all-organic polymer dielectric composite films with high energy density and low loss.
|
|
| 10. |
- Wang, Sifan, et al.
(författare)
-
Fire carbon emissions over Equatorial Asia reduced by shortened dry seasons
- 2023
-
Ingår i: npj Climate and Atmospheric Science. - 2397-3722. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- Fire carbon emissions over Equatorial Asia (EQAS) play a critical role in the global carbon cycle. Most regional fire emissions (89.0%) occur in the dry season, but how changes in the dry-season length affect the fire emissions remains poorly understood. Here we show that, the length of the EQAS dry season has decreased significantly during 1979–2021, and the delayed dry season onset (5.4 ± 1.6 (± one standard error) days decade−1) due to increased precipitation (36.4 ± 9.1 mm decade−1) in the early dry season is the main reason. The dry season length is strongly correlated with the length of the fire season. Increased precipitation during the early dry season led to a significant reduction (May: −0.7 ± 0.4 Tg C decade−1; August: −12.9 ± 6.7 Tg C decade−1) in fire carbon emissions during the early and peak fire season. Climate models from the Coupled Model Intercomparison Project Phase 6 project a continued decline in future dry season length in EQAS under medium and high-emission scenarios, implying further reductions in fire carbon emissions.
|
|
