| 1. |
- Shetty, Naveen, 1988, et al.
(författare)
-
Scalable Fabrication of Edge Contacts to 2D Materials : Implications for Quantum Resistance Metrology and 2D Electronics
- 2023
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society. - 2574-0970. ; 6:7, s. 6292-
-
Tidskriftsartikel (refereegranskat)abstract
- We report a reliable and scalable fabrication method for producing electrical contacts to two-dimensional (2D) materials based on the tri-layer resist system. We demonstrate the applicability of this method in devices fabricated on epitaxial graphene on silicon carbide (epigraphene) used as a scalable 2D material platform. For epigraphene, data on nearly 70 contacts result in median values of the one-dimensional (1D) specific contact resistances ρc ∼ 67 Ω·μm and follow the Landauer quantum limit ρc ∼ n-1/2, consistently reaching values ρc < 50 Ω·μm at high carrier densityn. As a proof of concept, we apply the same fabrication method to the transition metal dichalcogenide (TMDC) molybdenum disulfide (MoS2). Our edge contacts enable MoS2 field-effect transistor (FET) behavior with an ON/OFF ratio of >106 at room temperature (>109 at cryogenic temperatures). The fabrication route demonstrated here allows for contact metallization using thermal evaporation and also by sputtering, giving an additional flexibility when designing electrical interfaces, which is key in practical devices and when exploring the electrical properties of emerging materials. © 2023 The Authors.
|
|
| 2. |
- Shetty, Naveen, 1988, et al.
(författare)
-
Ultralow 1/f noise in epigraphene devices
- 2024
-
Ingår i: Applied Physics Letters. - 0003-6951 .- 1077-3118. ; 124:9
-
Tidskriftsartikel (refereegranskat)abstract
- We report the lowest recorded levels of 1/ f noise for graphene-based devices, at the level of S V / V 2 = S I / I 2 = 4.4 × 10 − 16 (1/Hz), measured at f = 10 Hz ( S V / V 2 = S I / I 2 < 10 − 16 1/Hz for f > 100 Hz) in large-area epitaxial graphene on silicon carbide (epigraphene) Hall sensors. This performance is made possible through the combination of high material quality, low contact resistance achieved by edge contact fabrication process, homogeneous doping, and stable passivation of the graphene layer. Our study explores the nature of 1/ f noise as a function of carrier density and device geometry and includes data from Hall sensors with device area range spanning over six orders of magnitude, with characteristic device length ranging from L = 1 μm to 1 mm. In optimized graphene Hall sensors, we demonstrate arrays to be a viable route to improve further the magnetic field detection: a simple parallel connection of two devices displays record-high magnetic field sensitivity at room temperature, with minimum detectable magnetic field levels down to B min = 9.5 nT/√Hz. The remarkable low levels of 1/ f noise observed in epigraphene devices hold immense capacity for the design and fabrication of scalable epigraphene-based sensors with exceptional performance.
|
|
| 3. |
- Shetty, Naveen, 1988, et al.
(författare)
-
Ultralow 1/f noise in epigraphene devices
- 2024
-
Ingår i: Applied Physics Letters. - : American Institute of Physics Inc.. - 0003-6951 .- 1077-3118. ; 124:9
-
Tidskriftsartikel (refereegranskat)abstract
- We report the lowest recorded levels of 1/ f noise for graphene-based devices, at the level of S V / V 2 = S I / I 2 = 4.4 × 10 − 16 (1/Hz), measured at f = 10 Hz ( S V / V 2 = S I / I 2 < 10 − 16 1/Hz for f > 100 Hz) in large-area epitaxial graphene on silicon carbide (epigraphene) Hall sensors. This performance is made possible through the combination of high material quality, low contact resistance achieved by edge contact fabrication process, homogeneous doping, and stable passivation of the graphene layer. Our study explores the nature of 1/ f noise as a function of carrier density and device geometry and includes data from Hall sensors with device area range spanning over six orders of magnitude, with characteristic device length ranging from L = 1 μm to 1 mm. In optimized graphene Hall sensors, we demonstrate arrays to be a viable route to improve further the magnetic field detection: a simple parallel connection of two devices displays record-high magnetic field sensitivity at room temperature, with minimum detectable magnetic field levels down to B min = 9.5 nT/√Hz. The remarkable low levels of 1/ f noise observed in epigraphene devices hold immense capacity for the design and fabrication of scalable epigraphene-based sensors with exceptional performance. © 2024 Author(s).
|
|
