| 1. |
- Purser, Jennifer A., et al.
(författare)
-
Repeatability and reproducibility of the ISO/TS 19700 steady state tube furnace
- 2013
-
Ingår i: Fire Safety Journal. - : Elsevier BV. - 0379-7112. ; 55, s. 22-34
-
Tidskriftsartikel (refereegranskat)abstract
- The ISO/TS 19700 steady state tube furnace is designed to measure the yields of combustion products, and in particular toxic combustion products, under a range of different specified decomposition conditions occurring in full-scale compartment fires. In order to establish the repeatability and reproducibility of the method, a Round Robin inter-laboratory study and statistical analysis has been carried out involving three laboratories. Pre-existing data from a fourth laboratory have also been considered where appropriate. Samples of different polymers (PMMA, LDPE, PA6.6 and rigid PVC) were tested under two fire conditions: well-ventilated flaming at 650 °C and post-flashover under-ventilated flaming at 825 °C, with each laboratory performing three replicate runs on each polymer under each condition. The results showed good agreement between laboratories and against calculated stoichiometric maxima, demonstrating satisfactory levels of repeatability and reproducibility for key combustion gases. These included O2 consumption, and the yields of CO2, CO, HCN and HCl. A number of amendments to the standard have been recommended as a result of minor procedural issues arising during preliminary work.
|
|
| 2. |
- Terenius, Olle, et al.
(författare)
-
RNA interference in Lepidoptera : An overview of successful and unsuccessful studies and implications for experimental design
- 2011
-
Ingår i: Journal of insect physiology. - : Elsevier BV. - 0022-1910 .- 1879-1611. ; 57:2, s. 231-245
-
Tidskriftsartikel (refereegranskat)abstract
- Gene silencing through RNA interference (RNAi) has revolutionized the study of gene function, particularly in non-model insects. However, in Lepidoptera (moths and butterflies) RNAi has many times proven to be difficult to achieve. Most of the negative results have been anecdotal and the positive experiments have not been collected in such a way that they are possible to analyze. In this review, we have collected detailed data from more than 150 experiments including all to date published and many unpublished experiments. Despite a large variation in the data, trends that are found are that RNAi is particularly successful in the family Saturniidae and in genes involved in immunity. On the contrary, gene expression in epidermal tissues seems to be most difficult to silence. In addition, gene silencing by feeding dsRNA requires high concentrations for success. Possible causes for the variability of success in RNAi experiments in Lepidoptera are discussed. The review also points to a need to further investigate the mechanism of RNAi in lepidopteran insects and its possible connection to the innate immune response. Our general understanding of RNAi in Lepidoptera will be further aided in the future as our public database at http://insectacentral.org/RNAi will continue to gather information on RNAi experiments.
|
|
| 3. |
- Witkowski, Artur, et al.
(författare)
-
Development of an Anaerobic Pyrolysis Model for Fire Retardant Cable Sheathing Materials
- 2015
-
Ingår i: Polymer degradation and stability. - : Elsevier BV. - 0141-3910 .- 1873-2321. ; 113, s. 208-217
-
Tidskriftsartikel (refereegranskat)abstract
- Wire and cable coverings are potentially a major cause of fire in buildings and other installations. As they need to breach fire walls and are frequently located in vertical ducting, they have significant potential to increase the fire hazard. It is therefore important to understand the ignition and burning characteristics of cables by developing a model capable of predicting their burning behaviour for a range of scenarios. The fire performance of electrical cables is usually dominated by the fire performance of the sheathing materials. The complexity of the problem increases when cable sheathing incorporates fire retardants. One-dimensional pyrolysis models have been constructed for cable sheathing materials, based on milligram-scale and bench-scale test data by comparing the performance of three different software tools (ThermaKin, Comsol Multiphysics and FDS, version 6.0.1). Thermogravimetric analysis and differential scanning calorimetry were conducted on powdered cable coatings to determine the thermal degradation mechanism, the enthalpy of decomposition reactions, and the heat capacities of all apparent species. The emissivity and the in-depth absorption coefficient were determined using reflectance and transmittance measurements, with dispersive and non-dispersive spectrometers and integrating spheres. Bench-scale tests were conducted with a mass loss calorimeter flushed with nitrogen on samples in a horizontal orientation, for comparison with the pyrolysis model of non-flaming decomposition at an external heat flux of 50 kW m-2. The parameters determined through analysis of the milligram-scale data were used to construct a pyrolysis model that predicted the total mass loss from calorimeter tests in anaerobic conditions. A condensed phase pyrolysis model that accurately predicts in-depth temperature profiles of a solid fuel, and the mass flux of volatiles evolved during degradation of the fuel, is an essential component of a comprehensive fire model, which when coupled to a computational fluid dynamics code can be used to predict the burning processes in a fire scenario. Pyrolysis models vary considerably in complexity based on the assumptions incorporated into the development of the model.
|
|
