| 1. |
- Hultmark, Sandra, 1994, et al.
(författare)
-
Impact of oxidation-induced ordering on the electrical and mechanical properties of a polythiophene co-processed with bistriflimidic acid
- 2022
-
Ingår i: Journal of Materials Chemistry C. - : Royal Society of Chemistry (RSC). - 2050-7526 .- 2050-7534. ; 11:24, s. 8091-8099
-
Tidskriftsartikel (refereegranskat)abstract
- The interplay between the nanostructure of a doped polythiophene with oligoether side chains and its electrical as well as mechanical properties is investigated. The degree of order of the polymer is found to strongly vary when co-processed with bistriflimidic acid (H-TFSI). The neat polythiophene as well as strongly oxidized material are largely disordered while intermediate concentrations of H-TFSI give rise to a high degree of π-stacking. The structural disorder of strongly oxidized material correlates with a decrease in the kinetic fragility with H-TFSI concentration, suggesting that positive interactions between TFSI anions and the polymer reduce the ability to crystallize. The electrical conductivity as well as the Young's modulus first increase upon the addition of 4-10 mol% of H-TFSI, while the loss of π-stacking observed for strongly oxidized material more significantly affects the latter. As a result, material comprising 25 mol% H-TFSI displays an electrical conductivity of 58 S cm−1 but features a relatively low Young's modulus of only 80 MPa. Decoupling of the electrical and mechanical properties of doped conjugated polymers may allow the design of soft conductors that are in high demand for wearable electronics and bioelectronics.
|
|
| 2. |
- Lund, Anja, 1971, et al.
(författare)
-
Roll-to-Roll Dyed Conducting Silk Yarns: A Versatile Material for E-Textile Devices
- 2018
-
Ingår i: Advanced Materials Technologies. - : Wiley. - 2365-709X. ; 3:12
-
Tidskriftsartikel (refereegranskat)abstract
- KGaA, Weinheim Textiles are a promising base material for flexible and wearable electronic applications such as sensors, actuators, and energy harvesters. An essential component in such electronic textiles (e-textiles) is electrically conducting yarns. Here, a continuous dyeing process is presented to convert an off-the-shelf silk sewing thread into a wash and wear resistant functional thread with a conductivity of about 70 S cm−1; a record high value for coated yarns. An aqueous ink based on the conducting polymer:polyelectrolyte complex poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is modified, to produce more than 100 m of dyed conducting threads, which are subsequently converted into e-textiles by both hand weaving and machine embroidery. The yarns are resistant to abrasion and wear, and can be machine washed at least 15 times with retained electronic properties. The woven fabric is used to design a capacitive touch sensor which functions as an e-textile keyboard.
|
|
| 3. |
- Adamczak, Desiree, et al.
(författare)
-
Influence of synthetic pathway, molecular weight and side chains on properties of indacenodithiophene-benzothiadiazole copolymers made by direct arylation polycondensation
- 2021
-
Ingår i: Journal of Materials Chemistry C. - : Royal Society of Chemistry (RSC). - 2050-7534 .- 2050-7526. ; 9:13, s. 4597-4606
-
Tidskriftsartikel (refereegranskat)abstract
- Atom-economic protocols for the synthesis of poly(indacenodithiophene-alt-benzothiadiazole) (PIDTBT) are presented in which all C-C coupling steps are achieved by direct arylation. Using two different synthetic pathways, PIDTBT copolymers with different side chains (hexylphenyl, octylphenyl, dodecyl, methyl/2-octyldodecylphenyl, 2-octyldodecylphenyl/2-octyldodecylphenyl) and molecular weight (MW) are prepared. Route A makes use of direct arylation polycondensation (DAP) of indacenodithiophene (IDT) and 4,7-dibromo-2,1,3-benzothiadiazole (BTBr2) leading to PIDTBT in high yields, with adjustable MW and without indications for structural defects. Route B starts from a polyketone precursor also prepared by DAP following cyclization. While route B allows introduction of asymmetric side chains at the IDT unit, polymer analogous cyclization gives rise to defect formation. The absorption coefficient of PIDTBT with alkylphenyl side chains made by route A increases with MW. Field-effect hole mobilities around similar to 10(-2) cm(2) V-1 s(-1) are molecular weight-independent, which is ascribed to a largely amorphous thin film morphology. PIDTBT with linear dodecyl side (C12) chains exhibits a bathochromic shift (20 nm), in agreement with theory, and more pronounced vibronic contributions to absorption spectra. In comparison to alkylphenyl side chains, C12 side chains allow for increased order in thin films, a weak melting endotherm and lower energetic disorder, which altogether explain substantially higher field-effect hole mobilities of similar to 10(-1) cm(2) V-1 s(-1).
|
|
| 4. |
- Hultmark, Sandra, 1994
(författare)
-
Impact of Glass Formation on the Thermal Stability of Non-Fullerene Solar Cells
- 2020
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- As the world faces major challenges with the climate change and the depletion of non-renewable resources, development of renewable sources is crucial towards a more sustainable future. Organic solar cell is an excellent alternative as a renewable resource with many advantages. In contrast to conventional inorganic solar cells organic solar cells can be produced with printing techniques. Making up-scaling of the production possible, which reduces the price. In addition, organic solar cells are lightweight, flexible and semi-transparent. One drawback is the stability of organic solar cells which needs to be improved to achieve longer lifetime and higher durability. The aim of this thesis is to investigate the use of multicomponent mixtures to improve the thermal stability of organic solar cells. The first part of the thesis explores the relation between entropy of mixing and glass formation. Perylene molecules with varying sidechains were mixed and it was found that mixing increases the glass formation, especially at low cooling rates where dimers where formed in the mixture. In the last part of the thesis, this mixing concept was used for organic solar cells. Binary devices of PTB7-Th: ITIC-4F and PTB7-Th: ITIC-4Cl were compared with the corresponding ternary solar cell PTB7-Th: ITIC-4F: ITIC-4Cl. It was found that the crystals were suppressed in the ternary resulting in stable photovoltaic performance up to 170 ºC and in addition stable performance at 130 ºC for more than 200 h, while binary devices suffer crystallization in the active layer.
|
|
| 5. |
- Hultmark, Sandra, 1994
(författare)
-
Impact of Glass Formation on the Thermal Stability of Non-Fullerene Solar Cells
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The world is facing immense challenges such as climate change and the depletion of non-renewable resources, making renewable sources of energy essential for a sustainable future. Organic solar cells are emerging as a promising technology; however, their stability requires significant improvement. The nanostructure of the active layer evolves over time, especially during heating, leading to a degradation in device performance. The focus of this thesis is to improve the thermal stability of the active layer. Firstly, the thesis studies the impact of mixing on glass formation by introducing the concept of kinetic fragility to organic semiconductors. Model systems of up to eight perylene derivatives are investigated that demonstrate an unprecedented ability to form a stable molecular glass due to aggregate formation. Next, the thesis discusses the impact of isomers on glass formation, which is illustrated with an anthradithiophene-based compound. Binary mixtures of isomers were also found to form aggregates that stabilize the liquid state. In addition, the thesis describes fragility studies of doped systems and establishes that chemical doping can affect the glass formation of a semiconducting polymer. The doped polymer shows a strong tendency for glass formation which is assigned to restricted motion of oxidized polymer chains. Furthermore, the thesis analyzes mixtures of organic photovoltaic acceptors. Binary mixtures of two indacenodithienothiophene-based acceptors are found to co-crystallize, while mixtures of three to five fused-ring non-fullerene acceptors exhibited a reduced tendency to crystallize. Finally, the thesis discusses the use of acceptor mixtures for improving the thermal stability of organic photovoltaic devices. Ternary solar cell devices with two acceptors are discussed that show a stable nanostructure and improved thermal stability compared to binary devices. The thesis also explores hexanary devices that consist of five acceptor molecules, which exhibit excellent thermal stability. Therefore, the use of multicomponent acceptor mixtures is found to be a powerful tool for creating thermally stable organic solar cells.
|
|
| 6. |
- Hultmark, Sandra, 1994, et al.
(författare)
-
Suppressing Co-Crystallization of Halogenated Non-Fullerene Acceptors for Thermally Stable Ternary Solar Cells
- 2020
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-3028 .- 1616-301X. ; 30:48
-
Tidskriftsartikel (refereegranskat)abstract
- While photovoltaic blends based on non-fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene-based acceptors that readily co-crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine-grained ternary blend with nanometer-sized domains that do not coarsen due to a high Tg ≈ 200 °C. As a result, annealing at temperatures of up to 170 °C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high-temperature processing protocols, which are needed for upscaling and high-throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 °C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability.
|
|
| 7. |
- Hultmark, Sandra, 1994, et al.
(författare)
-
Vitrification of octonary perylene mixtures with ultralow fragility
- 2021
-
Ingår i: Science Advances. - : American Association for the Advancement of Science (AAAS). - 2375-2548. ; 7:29
-
Tidskriftsartikel (refereegranskat)abstract
- Strong glass formers with a low fragility are highly sought-after because of the technological importance of vitrification. In the case of organic molecules and polymers, the lowest fragility values have been reported for single-component materials. Here, we establish that mixing of organic molecules can result in a marked reduction in fragility. Individual bay-substituted perylene derivatives display a high fragility of more than 70. Instead, slowly cooled perylene mixtures with more than three components undergo a liquid-liquid transition and turn into a strong glass former. Octonary perylene mixtures display a fragility of 13 +/- 2, which not only is a record low value for organic molecules but also lies below values reported for the strongest known inorganic glass formers. Our work opens an avenue for the design of ultrastrong organic glass formers, which can be anticipated to find use in pharmaceutical science and organic electronics.
|
|
| 8. |
- Kushwaha, Khushbu, et al.
(författare)
-
A Record Chromophore Density in High-Entropy Liquids of Two Low-Melting Perylenes: A New Strategy for Liquid Chromophores
- 2019
-
Ingår i: Advanced Science. - : Wiley. - 2198-3844. ; 6:4
-
Tidskriftsartikel (refereegranskat)abstract
- Liquid chromophores constitute a rare but intriguing class of molecules that are in high demand for the design of luminescent inks, liquid semiconductors, and solar energy storage materials. The most common way to achieve liquid chromophores involves the introduction of long alkyl chains, which, however, significantly reduces the chromophore density. Here, strategy is presented that allows for the preparation of liquid chromophores with a minimal increase in molecular weight, using the important class of perylenes as an example. Two synergistic effects are harnessed: (1) the judicious positioning of short alkyl substituents, and (2) equimolar mixing, which in unison results in a liquid material. A series of 1-alkyl perylene derivatives is synthesized and it is found that short ethyl or butyl chains reduce the melting temperature from 278 degrees C to as little as 70 degrees C. Then, two low-melting derivatives are mixed, which results in materials that do not crystallize due to the increased configurational entropy of the system. As a result, liquid chromophores with the lowest reported molecular weight increase compared to the neat chromophore are obtained. The mixing strategy is readily applicable to other pi-conjugated systems and, hence, promises to yield a wide range of low molecular weight liquid chromophores.
|
|
| 9. |
- Paleti, Sri Harish Kumar, et al.
(författare)
-
Correlating Acceptor Structure and Blend Nanostructure with the Photostability of Nonfullerene Organic Solar Cells
- 2022
-
Ingår i: Solar RRL. - : Wiley. - 2367-198X. ; 6:10
-
Tidskriftsartikel (refereegranskat)abstract
- The formation of photoinduced traps resulting in the loss of electron mobility deteriorates the performance of organic solar cells under continuous light soaking. The genesis of these loss mechanisms is elucidated by examining the structural stability of halogenated ITIC derivative films and the phase behavior of the respective binary systems by blending with the donor polymer PBDBT-2F. Under constant illumination, ITIC-4Cl is found to maintain its structural integrity, whereas fluorine on the peripheral moieties of ITIC-4F undergoes chemical substitution to form a mixture of ITIC and ITIC-4F. Thermal analysis of the light-soaked binary films reveals that ITIC-4Cl loses its crystalline phase while the crystallinity of ITIC-4F does not undergo changes. Further, it is shown that the addition of a small amount of ITIC-4F as a third component hinders the loss of ITIC-4Cl crystalline phase in bulk heterojunction blends through the formation of cocrystals. These results suggest that long-range ordering of NFAs does not necessarily improve the photostability of organic solar cells and that the addition of a third component, irrespective of the crystalline nature, can prevent changes in bulk heterojunction blend nanostructure.
|
|
| 10. |
- Paleti, Sri Harish Kumar, et al.
(författare)
-
Hexanary blends : a strategy towards thermally stable organic photovoltaics
- 2023
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Non-fullerene based organic solar cells display a high initial power conversion efficiency but continue to suffer from poor thermal stability, especially in case of devices with thick active layers. Mixing of five structurally similar acceptors with similar electron affinities, and blending with a donor polymer is explored, yielding devices with a power conversion efficiency of up to 17.6%. The hexanary device performance is unaffected by thermal annealing of the bulk-heterojunction active layer for at least 23 days at 130 °C in the dark and an inert atmosphere. Moreover, hexanary blends offer a high degree of thermal stability for an active layer thickness of up to 390 nm, which is advantageous for high-throughput processing of organic solar cells. Here, a generic strategy based on multi-component acceptor mixtures is presented that permits to considerably improve the thermal stability of non-fullerene based devices and thus paves the way for large-area organic solar cells.
|
|
