| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Ikumapayi, Fatai Kolawole
(författare)
-
Flotation chemistry of complex sulphide ores : recycling of process water and flotation selectivity
- 2010
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Recycling of flotation effluents through the ore processing plant is one of the ways of reducing both plant-operating costs and industrial impact onto the local ecosystem. Such waters named acid mine drainage (AMD), if discharged from sulphide flotation are gypsum (CaSO4.H2O) saturated and have a high salinity (on the order of 1000 ppm). As minor species, they commonly contain reduced sulphur compounds (RSC) (sulfoxyanions with sulphur in the oxidation state below (VI) such as SO32-, S2O32-, S2O52-, and S4O62-), cations of ferrous and non-ferrous metals, frothing molecules, residual chemical reagents and products of their degradation. Tailing ponds also host communities of chemolithotrophic and heterotrophic microorganisms which play an important role in dictating their aqueous and solid phase chemical speciation. Consequently, the key step towards developing scientific approaches of recycling of the tailing waters is elucidation of how, in what extent, and why the tailing water components, taken singly or jointly influence flotation of sulphides. In this work, the influence of main process water components of calcium and sulphate on chalcopyrite, galena, sphalerite and pyrite flotation has been investigated through Hallimond flotation, zeta-potential and diffuse reflectance FTIR spectroscopy measurements using pure mineral samples as well as bench scale flotation tests using complex sulphide ore. The significance of process water species in flotation has been assessed using deionised water, process water and simulated water containing calcium and sulphate ions in experiments. In addition, the effect of temperature in bench scale flotation tests has also been examined. Hallimond flotation indicated depression of chalcopyrite, galena and sphalerite and activation of pyrite in the presence of calcium and sulphate ions with potassium amyl xanthate as collector. Calcium ions have significant influence on zeta-potential characteristics and xanthate adsorption behaviour of chalcopyrite, galena, sphalerite and pyrite compared to sulphate ions. FTIR studies revealed the presence of surface oxidised sulfoxy species and surface iron and calcium carbonates on chalcopyrite in the presence of process water and water containing calcium ions, surface oxidised sulfoxy and carbonate species on galena in the presence of deionised water, process water and water containing calcium and sulphate ions, hydrated surface oxidised species and surface iron and calcium carbonates on pyrite in the presence of process water and water containing calcium ions all at pH 10.5 in which the surface species influenced xanthate adsorption. The presence of surface oxidised sulfoxy and carbonate species on sphalerite were also revealed at pH 11.5 in the presence of deionised water, process water and water containing calcium and sulphate ions in which surface species does not influence xanthate adsorption. Bench scale flotation using two different complex sulphide ores showed that chalcopyrite recovery is better in process water than tap water and general depression of chalcopyrite at temperatures lower than 22oC in either tap water or process water, activation of chalcopyrite at all temperatures in process water and depression of chalcopyrite when tap water containing calcium and sulphate ions was used at 22oC. It also showed that galena recovery is better in tap water than process water and depression of galena at temperatures lower than 22oC in either tap water or process water. It also showed that sphalerite recovery is better in process water than in tap water better recovery of sphalerite at temperatures lower than 22oC in either tap water or process water.
|
|
| 5. |
- Ikumapayi, Fatai Kolawole
(författare)
-
Recycling process water in complex sulphide ore flotation
- 2013
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- An approach to environmental sustainability and improved process economy in sulphide minerals production is recycling of process water in flotation of complex sulphide ores. However process water chemistry may be a critical issue to flotation efficiency. Process water discharged from sulphide flotation circuits are usually gypsum (CaSO4.H2O) saturated and have a high salinity. The major ionic species contained in the process water are Ca2+ and SO42- ions. As minor species, they commonly contain reduced sulphur compounds (RSC) (sulfoxyanions with sulphur in the oxidation state below (VI) such as SO32-, S2O32-, S2O52-, and S4O62-), cations of ferrous and non-ferrous metals, frothing molecules, residual chemical reagents and products of their degradation. However, the key step towards developing scientific approaches of recycling the process water is elucidation of how, in what extent, and why the recycled water components (taken singly or jointly) influence flotation of sulphides.Therefore a research program was initiated to understand the influence of the major and minor process water species on flotation and how to flexibly control such effects if any. In this work, the influence of major components of calcium and sulphate ions in process water on flotation of chalcopyrite, galena, sphalerite and pyrite minerals were investigated by Hallimond tube flotation. The surface chemistry and xanthate collector adsorption on the minerals under the influence of process water species were also studied by zeta-potential measurement, Fourier transform infrared spectroscopy (FTIR) with diffuse reflectance attachment and Xray photoelectron (XPS) spectroscopy. The effects of the major components were also investigated on complex sulphide ores flotation using bench scale flotation equipment. The impact of the species in flotation was studied using deionised water, tap water, process water and simulated water containing equivalent amount of calcium and sulphate species in process water.Oxidation of sulphide minerals has been known to be a very critical issue during flotation of sulphide minerals while several authors had reported that pyrite, the most abundant metal sulphide and very common gangue mineral in sulphide ores can generate hydrogen peroxide (H2O2). Hydrogen peroxide is a strong oxidizing agent stronger than oxygen. It was revealed that ferric defects on ground pyrite surfaces can generate OH• radicals upon interaction with water and combination of two OH• radicals yields H2O2. However, participation of these species in non-selective oxidation of the sulphide ore pulp components and hence in deteriorating the concentrate grade and recovery of metal-sulphides has not still been explored yet. In an attempt to fill the gap, a preliminary study was done to estimate the concentration of H2O2 in a complex sulphide ore pulp liquid during different times of ore grinding and compare them to oxidation of pulp solid. Study of possible ways of flexibly controlling H2O2 formation through known chemical means was also attempted.Hallimond tube flotation results showed marginally lower recoveries of chalcopyrite and galena in process water and in the presence of calcium and sulphate ions in both deionised and process waters using potassium amyl xanthate as collector. Whereas sphalerite and pyrite floatability were little increased in process water. There is no significant effect of calcium and sulphate ions on sphalerite in deionised water using isobutyl xanthate as collector. Zeta-potential shows the adsorption of calcium ions on the minerals whereby the potential are seen to increase, while sulphate ions have no significant effect. FTIR and XPS studies revealed the presence of surface oxidised sulfoxy species and surface calcium carbonates and/or calcium sulphate on chalcopyrite in the presence of process water and water containing calcium ions. Surface oxidised sulfoxy and carbonate species were seen on galena in the presence of deionised water, process water and water containing calcium and sulphate ions. The studies also showed hydrated surface oxidised species and surface iron and calcium carbonates on pyrite in the presence of process water and water containing calcium ions all at flotation pH 10.5. These surface species influenced xanthate adsorption on chalcopyrite, galena and pyrite. The presence of surface oxidised sulfoxy and carbonate species at the sphalerite flotation pH 11.5 were seen in the presence of deionised water, process water and water containing calcium and sulphate ions, but the surface species does not influence xanthate adsorption.Formation of hydrogen peroxide was revealed during grinding of a complex sulphide ore for the first time in mineral processing application and its formation was reduced by diethylenetriamine (DETA). FTIR spectroscopy of the pulp solid fraction shows varying degree of oxidised surface species which is related to concentration of H2O2 analyzed in pulp liquid. Addition of DETA at low concentration during grinding of complex sulphide ore depresses iron and copper minerals flotation during copper-lead flotation stage, DETA also depresses iron minerals during zinc mineral flotation. Consequently copper minerals flotation to copper-lead products is reduced and they are reporting to zinc products. However zinc minerals flotation to zinc product is improved.Tests performed on two different complex sulphide ores using bench scale flotation equipment showed that chalcopyrite, galena and sphalerite minerals recoveries are better in process water than tap water. The results also showed general decrease of the minerals floatability at temperatures lower than 22oC in either tap water or process water. An analysis of pulp liquid after flotation shows decreased calcium and increased sulphate ions. This indicates that there is adsorption of calcium ions on the minerals and dissolution and release of sulphate ions in solution. The studies showed that the process water can be recycled in flotation with no significant effect on grade and recovery of sulphide minerals.
|
|
| 6. |
- Ikumapayi, Fatai, et al.
(författare)
-
Recycling of process water : effect of calcium and sulphate ions in sulphides flotation
- 2010
-
Ingår i: Conference in Minerals Engineering. - Luleå : Luleå tekniska universitet. - 9789174390971 ; , s. 51-61
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The effects of major components of calcium and sulphate ions in process water on sulphide mineral flotation has been investigated through Hallimond flotation of pure sulphide minerals using tapwater and water containing sulphate and calcium ions as well as through bench scale flotation of complex sulphide ores using tapwater and process water and with tapwater in the presence of calcium and sulphate ions. Hallimond flotation indicated activation of pyrite and slight depression of galena and chalcopyrite in the presence of high concentration of major species of calcium and sulphate ions using potassium amyl xanthate as collector. Bench scale flotation indicated activation of zinc when processwater was used and flotation in tapwater containing calcium and sulphate ions presented similar but not identical results.
|
|
| 7. |
|
|
| 8. |
- Ikumapayi, Fatai, et al.
(författare)
-
Recycling of process water in sulphide flotation : Effect of calcium and sulphate ions on flotation of galena
- 2011
-
Ingår i: 5th International Flotation Conference 2011. - Red Hook : Curran Associates, Inc.. - 9781618393951 ; , s. 222-249
-
Konferensbidrag (refereegranskat)abstract
- The effects of major components of calcium and sulphate species present in recycled process water on galena flotation has been investigated through Hallimond flotation, zeta-potential, diffuse reflectance FTIR spectroscopy and XPS measurements using pure galena mineral as well as bench scale flotation tests using complex sulphide ore. The significance of process water species in flotation has been assessed using deionised water, process water and simulated water containing calcium and sulphate ions in experiments. In addition, the effect of temperature in bench scale flotation tests has also been examined.Hallimond flotation indicated lower recoveries of galena in the presence of calcium and sulphate ions using potassium amyl xanthate as collector. Calcium ions increase zeta-potential of galena while sulphate ions have no effect. FTIR and XPS studies revealed the presence of surface oxidised sulfoxy, hydroxyl and carbonate species on galena at pH 10.5 in deionised and process water, which surface species affected xanthate adsorption. Bench scale flotation using two different complex sulphide ores showed that galena recovery is better in process water than tap water at room temperature. Flotation results also indicated decrease of galenarecovery at temperatures lower than 22oC in either tap water or process water.
|
|
| 9. |
- Ikumapayi, Fatai, et al.
(författare)
-
Recycling of process water in sulphide flotation : effect of calcium and sulphate ions on flotation of galena
- 2012
-
Ingår i: Minerals Engineering. - : Elsevier BV. - 0892-6875 .- 1872-9444. ; 39, s. 77-88
-
Tidskriftsartikel (refereegranskat)abstract
- The effects of major components of calcium and sulphate species present in recycled process water on galena flotation has been investigated through Hallimond flotation, zeta-potential, diffuse reflectance FTIR spectroscopy and XPS measurements using pure galena mineral. The significance of process water species in flotation has been understood using deionised water, process water and simulated tap water containing equivalent calcium and sulphate ions concentration as in process water.Hallimond flotation indicated marginally lower recoveries of galena in the presence of calcium and sulphate ions using potassium amyl xanthate as collector. Zeta-potential shows the adsorption of calcium ions whereby the potential are seen to increase while sulphate ions have no significant effect. FTIR and XPS studies revealed surface calcium carbonate and/or calcium sulphate species in process water which affected xanthate adsorption. Presence of surface oxidised species such as sulfoxy, hydroxyl species on galena at pH 10.5 in deionised and process water was also revealed.
|
|
| 10. |
|
|
