| 1. |
- Byström, Emil, 1980-
(författare)
-
Porous polymeric materials for chromatography : Synthesis, functionalization and characterization
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Background: Separation science is heavily reliant on materials to fulfill ever more complicated demands raised by other areas of science, notably the rapidly expanding molecular biosciences and environmental monitoring. The key to successful separations lies in a combination of physical properties and surface chemistry of stationary phases used in liquid chromatographic separation, and this thesis address both aspects of novel separation materials.Methods: The thesis accounts for several approaches taken during the course of my graduate studies, and the main approaches have been i) to test a wild-grown variety of published methods for surface treatment of fused silica capillaries, to ascertain firm attachment of polymeric monoliths to the wall of microcolumns prepared in silica conduits; ii) developing a novel porogen scheme for organic monoliths including polymeric porogens and macromonomers; iii) evaluating a mesoporous styrenic monolith for characterization of telomers intended for use in surface modification schemes and; iv) to critically assess the validity of a common shortcut used for estimating the porosity of monoliths prepared in microconduits; and finally v) employing plasma chemistry for activating and subsequently modifying the surface of rigid, monodisperse particles prepared from divinylbenzene.Results: The efforts accounted for above have resulted in i) better knowledge of the etching and functionalization parameters that determine attachment of organic monoliths prepared by radical polymerization to the surface of silica; ii) polar methacrylic monoliths with a designed macroporosity that approaches the desired "connected rod" macropore morphology; iii) estab¬lishing the usefulness of monoliths prepared via nitroxide mediated polymerization in gradient polymer elution chromatography; iv) proving that scanning electron microscopy images are of limited value for assessing the macroporous properties of organic monoliths, and that pore measurements on externally polymerized monolith cocktails do not represent the porous properties of the same cocktail polymerized in narrow confinements; and v) showing that plasma bromination can be used as an activation step for rigid divinylbenzene particles to act as grafting handles for epoxy-containing telomers, that can be attached in a sufficiently dense layer and converted into carboxylate cation exchange layer that allows protein separations in fully aqueous eluents.
|
|
| 2. |
- Courtois, Julien, 1979-
(författare)
-
Monolithic separation media synthesized in capillaries and their applications for molecularly imprinted networks
- 2006
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The thesis describes the synthesis of chromatographic media using several different approaches, their characterizations and applications in liquid chromatography. The steps to achieve a separation column for a specific analyte are presented. The main focus of the study was the design of novel molecularly imprinted polymers. Attachment of monolithic polymeric substrates to the walls of fused silica capillaries was studied in Paper I. With a broad literature survey, a set of common methods were tested by four techniques and ranked by their ability to improve anchoring of polymers. The best procedure was thus used for all further studies. Synthesis of monoliths in capillary columns was studied in Paper II. With the goal of separating proteins without denaturation, various monoliths were polymerized in situ using a set of common monomers and cross-linkers mixed with poly(ethylene glycol) as porogen. The resulting network was expected to present “protein-friendly pores”. Chemometrics were used to find and describe a set of co-porogens added to the polymerization cocktails in order to get good porosity and flow-through properties. Assessment of the macroporous structure of a monolith was described in Paper III. An alternative method to mercury intrusion porosimetry was proposed. The capillaries were embedded in a stained resin and observed under transmission electron microscope. Images were then computed to determine the pore sizes. Synthesis of molecularly imprinted polymers grafted to a core mono-lith in a capillary was described in Paper IV. The resulting material, imprinted with local anaesthetics, was tested for its chromatographic performance. Similar imprinted polymers were characterized by microcalorimetry in Paper V. Finally, imprinted monoliths were also synthesized in a glass tube and further introduced in a NMR rotor to describe the interactions between stationary phase and template in Paper VI.
|
|
| 3. |
- Hemström, Petrus, 1968-
(författare)
-
Hydrophilic Separation Materials for Liquid Chromatography
- 2007
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The main focus of this thesis is on hydrophilic interaction chromatography (HILIC) and the preparation of stationary phases for HILIC. The mechanism of HILIC is also discussed; a large part of the discussion has been adapted from a review written by me and professor Irgum for the Journal of Separation Science (ref 34). By reevaluating the literature we have revealed that the notion of HILIC as simply partitioning chromatography needed modification. However, our interest in the HILIC mechanism was mainly inspired by the need to understand how to construct the optimal HILIC stationary phase. The ultimate stationary phase for HILIC is still not found. My theory is that a non-charged stationary phase capable of retaining a full hydration layer even at extreme acetonitrile (> 85%) concentrations should give a HILIC stationary phase with a more pure partitioning retention behavior similar to that of a swollen C18 reversed phase. The preparation of a sorbitol methacrylate grafted silica stationary phase is one of our attempts at producing such a stationary phase. The preparation of such a grafted silica has been performed, but with huge difficulty and this work is still far from producing a column of commercial quality and reprodicibility. This thesis also discusses a new method for the initiation of atom transfer radical polymerization from chlorinated silica. This new grafting scheme theoretically results in a silica particle grafted with equally long polymer chains, anchored to the silica carrier by a hydrolytically stable silicon-carbon bond. The hydrolytic stability is especially important for HILIC stationary phases due to the high water concentration at the surface.
|
|
| 4. |
- Nguyen, Anh Mai, 1960-
(författare)
-
New approaches to preparation of macroporous monoliths for use in liquid chromatography
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- High performance liquid chromatography (HPLC) is one of the major techniques in separat-ion sciences. Faster separation and higher efficiency are required to meet ever-growing demands. Despite numerous studies and achievements on improving mass transfer in particulate packings discontinuity seems to be the cornerstone drawback in their development. Macroporous continuous beds or monoliths are therefore a promising alternative to the particle medium. This thesis deals with preparation of new monoliths used as carrier for HPLC. Two different approaches were developed for two polymer systems. One was based on polycondensation of epoxy resins and polyamines which were components of an oil-in-water emulsion. An epoxy resin mixture was dispersed in aqueous polyamine phase with the aid of a surfactant. The other involved a traverse of a ready-made polymer solution around its upper critical solution temperature (UCST). In other words, linear polyamides, non-covalently crosslinked polymers, dissolved in a solvent at temperature higher than their UCST followed by slow cooling to below the critical temperature to precipitate the polymers. Partly re-established hydrogen bonds resulted in the formation of crystallites that interconnected into a network structure. Factors controlling morphology and porosity of final products were investigated. The study also deals with surface modifying for chromatographic applications. Functionalization pathways attempted in the thesis were quaterization of inherent amine of the epoxy-based monoliths and grafting tentacle ion groups via glycidyl methacrylate by atom transfer radical polymerization (ATRP) for ion exchange chromatography (IEC).
|
|
| 5. |
- Nordborg, Anna, 1977-
(författare)
-
Synthesis and modifications of materials for separation science
- 2008
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis deals with the preparation of materials for use in separation science and their surface modification by grafting. The overall aim is the preparation of diverse materials by combination of a set of developed tools.Included in the thesis is the synthesis of monolithic media using non-traditional crosslinkers, the characterization of their porous properties and initial testing in reversed-phase chromatographic separation of proteins. The preparation of a library of short polymer chains, telomers, with varied functionality and their characterization is reported. Included in the characterization is the gradient polymer elution chromatography of selected telomers on a monolithic column in capillary format. The technique shows promise as a tool for monitoring of polymerization processes and for the separation of telomers with similar size but different functionalities or characteristics.Finally, the combination of polymeric support materials and the prepared telomer library is used in surface modification. Surface modification is performed onto activated surfaces via a “grafting to” approach. One example is shown, the surface modification of epoxy-modified divinylbenzene particles by attachment of telomer chains introducing ion-exchange functionality. The material is tested for the separation of proteins, in ion-exchange chromatography mode.
|
|
| 6. |
- Nygren, Yvonne, 1965-
(författare)
-
Advances in analytical methodologies for studies of the platinum metallome in malignant cells exposed to cisplatin
- 2010
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The scientific progress about the important chemotherapeutic drug substance cisplatin (CDDP) and its function has often been rendered by data difficult to interpret, and still many questions about its mode of action remains to be clarified by the scientific community. However, studies of CDDP possess a high complexity due to; i) low intracellular concentration, ii) many potential biomolecule targets, iii) poor or unknown stability of the intact drug and its biomolecule adducts and iv) complex and varying sample matrices. Metallomic studies, using advanced analytical techniques may contribute to clarify the interactions between CDDP and intracellular biomolecules. For a successful outcome sample preparation conditions as well as separation and detection techniques must be carefully selected and optimized to achieve accurate results and correct interpretation of data. This thesis describes some new and improved analytical methodologies for characterizing the Pt metallome in CDDP-exposed malignant cells. The developed methods are based on powerful liquid chromatography (LC) methods hyphenated to sensitive detection by inductively coupled plasma- (ICP) and electrospray ionization mass spectrometry (ESIMS). Consideration has also been taken about sample preparation conditions. By selecting “chemically inert” sample preparation (cell lysis by osmosis) and separation (using only nonreactive or no additatives) conditions we could avoid the formation of platinum artifact compounds previously described in the literature (Paper I and II). Using oxygen containing organic solvents with high boiling points (dimethylformamide; DMF, 1,4-dioxane, n-propanol and ethanol) as alternatives to acetonitrile in the LC separations, significant improvements were achieved in ICPMS sensitivity and robustness. When evaluated in combination with chromatographic performance and ESIMS detection the overall best performance was achieved with n-propanol (Paper II, III and IV). From the studies in Paper II we could show that free intact CDDP can be found in malignant cells, as supporting evidence for passive or endocytotic uptake of the drug and further estimate a half-life for intracellular CDDP to about 15 minutes. Such data has not been shown before. In Paper V, the above improved LC methods were used to demonstrate differences in the platinum and cupper metallome from sensitive and resistant T289 melanoma cells exposed to CDDP at near clinical levels. In a wider perspective we have shown the potential of using hydrophilic liquid interaction chromatography (HILIC) hyphenated to ICPMS detection as a general approach for analysis of hydrophilic metallo-compounds (Paper II). Taking advantage of the superior ICPMS performance using n-propanol gradients for reversed phase liquid chromatography (RPLC) possess a true alternative and /or complimentary technique to size exclusion chromatography (SEC) commonly applied within metallomic studies of biomolecules (Paper V). Using n-propanol in HILIC as well as in RPLC enables parallel detection by ICP- and ESIMS using only one set of chromatographic parameters (Paper III and IV), something commonly called for by scientists in the field.
|
|
