| 1. |
- Irshad, Muneeb, et al.
(författare)
-
A Brief Description of High Temperature Solid Oxide Fuel Cell's Operation, Materials, Design, Fabrication Technologies and Performance
- 2016
-
Ingår i: Applied Sciences. - : MDPI AG. - 2076-3417. ; 6:3
-
Forskningsöversikt (refereegranskat)abstract
- Today's world needs highly efficient systems that can fulfill the growing demand for energy. One of the promising solutions is the fuel cell. Solid oxide fuel cell (SOFC) is considered by many developed countries as an alternative solution of energy in near future. A lot of efforts have been made during last decade to make it commercial by reducing its cost and increasing its durability. Different materials, designs and fabrication technologies have been developed and tested to make it more cost effective and stable. This article is focused on the advancements made in the field of high temperature SOFC. High temperature SOFC does not need any precious catalyst for its operation, unlike in other types of fuel cell. Different conventional and innovative materials have been discussed along with properties and effects on the performance of SOFC's components (electrolyte anode, cathode, interconnect and sealing materials). Advancements made in the field of cell and stack design are also explored along with hurdles coming in their fabrication and performance. This article also gives an overview of methods required for the fabrication of different components of SOFC. The flexibility of SOFC in terms fuel has also been discussed. Performance of the SOFC with varying combination of electrolyte, anode, cathode and fuel is also described in this article.
|
|
| 2. |
- Irshad, Muneeb, et al.
(författare)
-
Electrochemical evaluation of mixed ionic electronic perovskite cathode LaNi1-xCoxO3-delta for IT-SOFC synthesized by high temperature decomposition
- 2021
-
Ingår i: International journal of hydrogen energy. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0360-3199 .- 1879-3487. ; 46:18, s. 10448-10456
-
Tidskriftsartikel (refereegranskat)abstract
- The cobalt doped perovskite cathode material LaNi1-xCoxO3-3 (x = 0.4, 0.6, 0.8) synthesized by cost effective high temperature decomposition is investigated as mixed ionic electronic conductor (MIEC) for intermediate temperature solid oxide fuel cell (IT-SOFC). LaNiO3 is known for its high electronic conductivity and to introduce more oxygen vacancies for enhancing its ionic conductivity, Ni at B site is substituted by Co. XRD analysis showed perovskite structure for all samples with no additional phases, which was also confirmed by FTIR results. Microstructure analysis revealed well connected and porous structure for LaNi1-xCoxO3-3 (x = 0.6) compared to other compositions. The elemental analysis using EDX confirmed presence of lanthanum, nickel, and cobalt within all samples. No prominent weight loss was observed during TGA analysis. The highest value of conductivity was obtained for LaNi1-xCoxO3-3 (x = 0.6) due to its porous and networked structure of sub micrometric grains. The superior performance is attained for the cell based on LaNi1-xCoxO3-3 (x = 0.6) cathode with maximum power density of 0.45 Wcm(-2) compared to other composition which can be attributed to its well connected and porous structure that caused enhanced electrochemical reaction at triple phase boundary (TPB). It was therefore deduced that LaNi1-xCoxO3-8 (x = 0.6) is promising composition to be used as MIEC cathode for IT-SOFC. (c) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
|
|
| 3. |
- Irshad, Muneeb, et al.
(författare)
-
Evaluation of BaCo0.Fe-4(0).4Zr0.2-xNixO3-delta perovskite cathode using nickel as a sintering aid for IT-SOFC
- 2021
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 11:24, s. 14475-14483
-
Tidskriftsartikel (refereegranskat)abstract
- In this research work, BaCo0.Fe-4(0).4Zr0.2-xNixO3-delta (x = 0, 0.01, 0.02, 0.03, 0.04) perovskite cathode material for IT-SOFC is synthesized successfully using a combustion method and sintered at low temperature. The effects of nickel as a sintering aid on the properties of BaCo0.Fe-4(0).Zr-4(0).O-2(3-delta) are investigated through different characterization methods. The addition of nickel increased the densification and grain growth at a lower sintering temperature 1200 degrees C. XRD analysis confirms a single phase of BaCo0.Fe-4(0).Zr-4(0).O-2(3-delta), and an increase in crystalline size is observed. SEM micrographs show formation of dense microstructure with increased nickel concentration. TGA analysis revealed that BaCo0.Fe-4(0).4Zr0.2-xNix cathode materials are thermally stable within the SOFC temperature range, and negligible weight loss of 2.3% is observed. The bonds of hydroxyl groups and metal oxides are confirmed for all samples through FTIR analysis. The highest electrical properties are observed for BaCo0.Fe-4(0).4Zr0.2-xNix (x = 0.04) due to increased densification and electronic defects compared to other compositions. The maximum power density of 0.47 W cm(-2) is obtained for a cell having cathode material BaCo0.Fe-4(0).4Zr0.2-xNix (x = 0.02) owing to its permeable and well-connected structure compared to others.
|
|
| 4. |
- Irshad, Muneeb, et al.
(författare)
-
Evaluation of BaZr0.8X0.2 (X= Y, Gd, Sm) proton conducting electrolytes sintered at low temperature for IT-SOFC synthesized by cost effective combustion method
- 2020
-
Ingår i: Journal of Alloys and Compounds. - : ELSEVIER SCIENCE SA. - 0925-8388 .- 1873-4669. ; 815
-
Tidskriftsartikel (refereegranskat)abstract
- In present work, perovskite structured proton conducting electrolyte materials BaZr0.8Y0.2 (BZY), BaZr0.8Gd0.2 (BZGd) and BaZr0.8Sm0.2 (BZSm) synthesized by cost effective combustion method are investigated for intermediate temperature solid oxide fuel cell (IT-SOFC). The synthesized BZY, BZGd and BZSm materials are sintered at low temperature (1150 degrees C) and the effect of low sintering temperature on electrolyte properties are also explored. Microstructure, surface morphology, elemental composition, functional group and weight loss are studied using different characterization techniques like XRD, SEM, EDX, FTIR and TGA. XRD shows cubic perovskite structure of all synthesized materials. Secondary phase of Y2O3 is observed in BZY while BaO is observed in BZGd and BZSm due to low sintering temperature. SEM micrographs reveals dense microstructure of BZSm compared to BZY and BZGd. EDX analysis confirms the required material composition within all samples with no impurities. FTIR shows the presence of hydroxyl group and metal oxides and it is observed that BZY exhibit more structural symmetry compared to BZSm and BZGd. Highest conductivity observed (2.2 x 10(-3) S/cm) for BZY due to its structural symmetry and characteristic to prefer B-site of perovskite. Also significant power densities of 0.34 Wcm(-2), 0.24 Wcm(-2) and 0.32 Wcm(-2) for BZY, BZGd and BZSm electrolytes based cells at 650 degrees C implies that BZY, BZGd and BZSm can be used as IT-SOFC electrolytes. (C) 2019 Elsevier B.V. All rights reserved.
|
|
| 5. |
- Irshad, Muneeb, et al.
(författare)
-
Evaluation of densification effects on the properties of 8 mol % yttria stabilized zirconia electrolyte synthesized by cost effective coprecipitation route
- 2021
-
Ingår i: Ceramics International. - : ELSEVIER SCI LTD. - 0272-8842 .- 1873-3956. ; 47:2, s. 2857-2863
-
Tidskriftsartikel (refereegranskat)abstract
- In the current work, properties of 8YSZ powder synthesized by co-precipitation method and sintered at 1200 degrees C, 1300 degrees C and 1400 degrees C are investigated. XRD analysis shows that all 8YSZ samples exhibit cubic phase and increased crystallite size is observed with increased sintering temperature. The relative density measurements show increased densification due to increased sintering temperature and relative density >96% is obtained for 8YSZ sintered at 1400 degrees C. SEM micrographs also confirm that structure becomes denser with increase in sintering temperature. EDX analysis confirms the elemental composition of 8YSZ and no impurity is observed while thermal analysis reveals weight losses within different temperature ranges. High ionic conductivity and maximum power density of 0.41 Wcm(-2) is obtained for cell having 8YSZ electrolyte sintered at 1400 degrees C owing to its compact, dense and gas tight microstructure.
|
|
| 6. |
- Rafique, Asia, et al.
(författare)
-
Significance enhancement in the conductivity of core shell nanocomposite electrolytes
- 2015
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 5:105, s. 86322-86329
-
Tidskriftsartikel (refereegranskat)abstract
- Today, there is great demand of electrolytes with high ionic conductivities at low operating temperatures for solid-oxide fuel cells. Therefore, a co-doped technique was used to synthesize a highly ionically conductive two phase nanocomposite electrolyte Sr/Sm-ceria-carbonate by a co-precipitation method. A significant increase in conductivity was measured in this co-doped Sr/Sm-ceria-carbonate electrolyte at 550 degrees C as compared to the more commonly studied samarium doped ceria. The fuel cell power density was 900 mW cm(-2) at low temperature (400-580 degrees C). The composite electrolyte was found to have homogenous morphology with a core-shell structure using SEM and TEM. The two phase core-shell structure was confirmed using XRD analysis. The crystallite size was found to be 30-60 nm and is in good agreement with the SEM analysis. The thermal analysis was determined with DSC. The enhancement in conductivity is due to two effects; co-doping of Sr in samarium doped ceria and it's composite with carbonate which is responsible for the core-shell structure. This co-doped approach with the second phase gives promise in addressing the challenge to lower the operating temperature of solid oxide fuel cells (SOFC).
|
|
