| 1. |
- Morawska, L., et al.
(författare)
-
Airborne particles in indoor environment of homes, schools, offices and aged care facilities : The main routes of exposure
- 2017
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120. ; 108, s. 75-83
-
Forskningsöversikt (refereegranskat)abstract
- It has been shown that the exposure to airborne particulate matter is one of the most significant environmental risks people face. Since indoor environment is where people spend the majority of time, in order to protect against this risk, the origin of the particles needs to be understood: do they come from indoor, outdoor sources or both? Further, this question needs to be answered separately for each of the PM mass/number size fractions, as they originate from different sources. Numerous studies have been conducted for specific indoor environments or under specific setting. Here our aim was to go beyond the specifics of individual studies, and to explore, based on pooled data from the literature, whether there are generalizable trends in routes of exposure at homes, schools and day cares, offices and aged care facilities. To do this, we quantified the overall 24 h and occupancy weighted means of PM10, PM2.5 and PN - particle number concentration. Based on this, we developed a summary of the indoor versus outdoor origin of indoor particles and compared the means to the WHO guidelines (for PM10 and PM2.5) and to the typical levels reported for urban environments (PN). We showed that the main origins of particle metrics differ from one type of indoor environment to another. For homes, outdoor air is the main origin of PM10 and PM2.5 but PN originate from indoor sources; for schools and day cares, outdoor air is the source of PN while PM10 and PM2.5 have indoor sources; and for offices, outdoor air is the source of all three particle size fractions. While each individual building is different, leading to differences in exposure and ideally necessitating its own assessment (which is very rarely done), our findings point to the existence of generalizable trends for the main types of indoor environments where people spend time, and therefore to the type of prevention measures which need to be considered in general for these environments.
|
|
| 2. |
- Ahlberg, Erik, et al.
(författare)
-
"Vi klimatforskare stödjer Greta och skolungdomarna"
- 2019
-
Ingår i: Dagens nyheter (DN debatt). - 1101-2447.
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- DN DEBATT 15/3. Sedan industrialiseringens början har vi använt omkring fyra femtedelar av den mängd fossilt kol som får förbrännas för att vi ska klara Parisavtalet. Vi har bara en femtedel kvar och det är bråttom att kraftigt reducera utsläppen. Det har Greta Thunberg och de strejkande ungdomarna förstått. Därför stödjer vi deras krav, skriver 270 klimatforskare.
|
|
| 3. |
|
|
| 4. |
- Isaxon, Christina, et al.
(författare)
-
Characteristics of Welding Fume Aerosol Investigated in Three Swedish Workshops
- 2009
-
Ingår i: Inhaled Particles X. - : IOP Publishing. - 1742-6596 .- 1742-6588. ; 151
-
Konferensbidrag (refereegranskat)abstract
- Potentially high human exposures to nanometer sized airborne particles occur due to welding and other thermal processes in industrial environments. Detailed field measurements of physical and chemical particle characteristics were performed in three work-shops in Sweden. Measurements were performed both in the plume 5-20 cm above the welding point and in the background air (more than 5 m away from the nearest known particle source). Particle number and mass concentrations were measured on-line. A low pressure impactor was used for size-resolved chemical particle composition. The in-plume measurements generated the chemical signatures for different welding processes. These signatures were then used to identify contributions from various processes to the particle concentrations in different size classes. The background number and mass concentrations increased by more than an order of magnitude during intense activities in the work-shops compared to low activities during breaks.
|
|
| 5. |
|
|
| 6. |
- Bergman, Fanny, et al.
(författare)
-
Physicochemical metamorphosis of re-aerosolized urban PM2.5
- 2024
-
Ingår i: Journal of Aerosol Science. - : Elsevier Ltd. - 0021-8502 .- 1879-1964. ; 181
-
Tidskriftsartikel (refereegranskat)abstract
- The toxicity of particulate matter (PM) is dependent on particle physical and chemical properties and is commonly studied using in vivo and in vitro approaches. PM to be used for in vivo and in vitro studies is often collected on filters and then extracted from the filter surface using a solvent. During extraction and further PM sample handling, particle properties change, but this is often neglected in toxicology studies, with possible implications for health effect assessment. To address the current lack of knowledge and investigate changes in particle properties further, ambient PM with diameter less than 2.5 μm (PM2.5) was collected on filters at an urban site and extracted using a standard methanol protocol. After extraction, the PM was dried, dispersed in water and subsequently nebulized. The resulting aerosol properties were then compared to those of the ambient PM2.5. The number size distribution for the nebulized aerosol resembled the ambient in terms of the main mode diameter, and >90 % of particle mass in the nebulized size distribution was still in the PM2.5 range. Black carbon made up a similar fraction of PM mass in nebulized as in ambient aerosol. The sulfate content in the nebulized aerosol seemed depleted and the chemical composition of the organic fraction was altered, but it remains unclear to what extent other non-refractory components were affected by the extraction process. Trace elements were not distributed equally across size fractions, neither in ambient nor nebulized PM. Change in chemical form was studied for zinc, copper and iron. The form did not appear to be different between the ambient and nebulized PM for iron and copper, but seemed altered for zinc. Although many of the studied properties were reasonably well preserved, it is clear that the PM2.5 collection and re-aerosolization process affects particles, and thus potentially also their health effects. Because of this, the effect of the particle collection and extraction process must be considered when evaluating cellular and physiological outcomes upon PM2.5 exposure. © 2024 The Authors
|
|
| 7. |
- Bergman, Fanny, et al.
(författare)
-
Physicochemical metamorphosis of re-aerosolized urban PM2.5
- 2024
-
Ingår i: Journal of Aerosol Science. - : Elsevier Ltd. - 0021-8502 .- 1879-1964. ; 181
-
Tidskriftsartikel (refereegranskat)abstract
- The toxicity of particulate matter (PM) is dependent on particle physical and chemical properties and is commonly studied using in vivo and in vitro approaches. PM to be used for in vivo and in vitro studies is often collected on filters and then extracted from the filter surface using a solvent. During extraction and further PM sample handling, particle properties change, but this is often neglected in toxicology studies, with possible implications for health effect assessment. To address the current lack of knowledge and investigate changes in particle properties further, ambient PM with diameter less than 2.5 μm (PM2.5) was collected on filters at an urban site and extracted using a standard methanol protocol. After extraction, the PM was dried, dispersed in water and subsequently nebulized. The resulting aerosol properties were then compared to those of the ambient PM2.5. The number size distribution for the nebulized aerosol resembled the ambient in terms of the main mode diameter, and >90 % of particle mass in the nebulized size distribution was still in the PM2.5 range. Black carbon made up a similar fraction of PM mass in nebulized as in ambient aerosol. The sulfate content in the nebulized aerosol seemed depleted and the chemical composition of the organic fraction was altered, but it remains unclear to what extent other non-refractory components were affected by the extraction process. Trace elements were not distributed equally across size fractions, neither in ambient nor nebulized PM. Change in chemical form was studied for zinc, copper and iron. The form did not appear to be different between the ambient and nebulized PM for iron and copper, but seemed altered for zinc. Although many of the studied properties were reasonably well preserved, it is clear that the PM2.5 collection and re-aerosolization process affects particles, and thus potentially also their health effects. Because of this, the effect of the particle collection and extraction process must be considered when evaluating cellular and physiological outcomes upon PM2.5 exposure.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
